Okin 5 Button Recliner Hand Control User Manual

1. Introduction

This manual provides essential information for the safe and effective use of your Okin 5 Button Recliner Hand Control. Please read this manual thoroughly before installation and operation. Keep this manual for future reference.

The Okin 5 Button Recliner Hand Control is a replacement part designed for power recliners, electric recliners, and sofa reclinables. It features a 5-pin plug for direct circuit compatibility and an integrated USB port for charging devices.

2. Safety Information

• Always disconnect power to the recliner before attempting any installation, maintenance, or troubleshooting.
• Ensure the replacement part is compatible with your recliner's motor and wiring. Refer to the product code and plug type.
• Do not expose the hand control to excessive moisture or liquids.
• Do not attempt to disassemble or repair the unit yourself. Contact qualified personnel for service.
• Keep children and pets away from moving parts of the recliner during operation.

3. Product Overview

The Okin 5 Button Recliner Hand Control features a durable ABS material construction, five control buttons, and a USB charging port. It connects to the recliner motor via a 5-pin plug.

Figure 3.1: Overview of the Okin 5 Button Recliner Hand Control, showing the control unit, cable, and 5-pin plug.

Figure 3.2: Top view of the hand control, highlighting the five buttons and the central USB charging port.

Figure 3.3: Close-up view of the 5-pin plug, which connects to the recliner's motor.

Figure 3.4: Illustration showing the 5-pin curved plug and its connection point for the recliner motor.

Figure 3.5: Dimensional drawing of the hand control unit, indicating its length, width, and depth.

Figure 3.6: Rear view of the hand control, showing the product label with model and electrical specifications.

4. Setup and Installation

Before installation, ensure the recliner is unplugged from the power outlet.

1. Identify the Existing Control: Locate the current hand control and its connection point to the recliner motor.
2. Disconnect Old Control: Carefully unplug the old hand control's 5-pin connector from the motor. Note the orientation if necessary.
3. Verify Compatibility: Compare the new Okin 5-pin plug with the motor's receptacle to ensure a match. Check the product code on the label if available.
4. Connect New Control: Insert the 5-pin plug of the new Okin hand control firmly into the corresponding port on the recliner motor. Ensure a secure connection.
5. Route Cable: Route the cable safely to prevent pinching or damage.
6. Test Functionality: Plug the recliner back into the power outlet and test all buttons on the hand control to ensure proper operation.

Important: This hand control is compatible with electric furniture using OKIN single motors, and also Dewert, Limoss, and Ashley systems. Always verify the plug type before installation.

5. Operating Instructions

The Okin 5 Button Recliner Hand Control allows for precise adjustment of your recliner's position and includes a convenient USB charging port.

5.1 Button Functions

Press and hold the desired button to move the recliner to the desired position. Release the button to stop movement.

5.2 USB Charging Port

The integrated USB port allows you to charge compatible electronic devices such as smartphones and smartwatches. Simply connect your device's USB charging cable to the port on the hand control.

Note: The USB port provides 5V 2A output. Charging speed may vary depending on the device and its charging requirements.

6. Maintenance and Care

• Cleaning: Wipe the hand control surface with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Do not use abrasive cleaners or solvents.
• Cable Inspection: Periodically inspect the cable for any signs of wear, fraying, or damage. If damage is observed, discontinue use and replace the unit.
• Connection Check: Ensure the 5-pin plug remains securely connected to the motor.
• Storage: If the recliner is not in use for an extended period, it is recommended to unplug it from the power outlet.

Product Care Instructions: Dry Clean (referring to the recliner fabric, not the control unit itself).

7. Troubleshooting

8. Specifications

9. Warranty and Support

For information regarding warranty coverage and customer support, please refer to the original purchase documentation or contact the seller directly. Okin is committed to providing dedicated support to ensure a seamless setup process and address any questions or concerns.

For further assistance, please visit the official Okin store or contact their customer service.

Visit the Okin Store on Amazon