1. Introduction
The RALENO PS080 Softbox Lighting Kit is designed to provide soft, continuous, and flicker-free illumination for various photography and video recording applications. This kit features 50W / 5500K / 95 CRI LED bulbs, adjustable tripods, and compact softboxes, making it suitable for both studio and on-location use. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your lighting equipment.
2. Package Contents
Please verify that all items listed below are included in your package:
- 2 x 16x16-inch Soft Boxes
- 2 x 50W LED Bulbs (5500K, 95 CRI)
- 2 x Light Stands (Adjustable height: 16.5'' to 60'')
- 2 x White Diffuser Cloths
- 1 x Nylon Handbag
- 1 x Instruction Manual

Figure 2.1: All components included in the RALENO PS080 Softbox Lighting Kit.
3. Setup Instructions
- Assemble the Light Stand:
Unfold the legs of the light stand until they are fully extended and stable. Adjust the height of the stand by loosening the locking knobs on each section, extending the pole to your desired height (16.5'' to 60''), and then securely tightening the knobs. Ensure the stand is stable before proceeding.
- Attach the Softbox:
Mount the softbox onto the top stud of the light stand. Secure it by tightening the locking screw on the softbox bracket. The softbox features a 210° free angle rotation for flexible positioning.

Figure 3.1: Softbox rotation and tripod features.
- Install the LED Bulb:
Carefully screw the 50W LED bulb into the socket inside the softbox. Ensure it is securely fastened but do not overtighten.

Figure 3.2: The 50W LED bulb with key features.
- Attach the White Diffuser Cloth:
Secure the white diffuser cloth to the front of the softbox using the attached Velcro strips. This will soften the light output and reduce harsh shadows.
- Connect to Power:
Plug the power cord into a standard electrical outlet. Each softbox has an in-line switch for easy power control.
4. Operating Instructions
- Power On/Off: Use the in-line switch on the power cord to turn the softbox light on or off.
- Adjust Height: Loosen the locking knobs on the light stand sections to adjust the height. Retighten securely once the desired height is achieved.
- Adjust Angle: Loosen the locking screw on the softbox bracket to tilt the softbox up or down, or rotate it to direct the light as needed. Tighten the screw to lock the position.
- Light Quality: The 5500K color temperature provides a natural daylight-balanced light, ideal for accurate color rendition in photography and video. The 95 CRI ensures high color accuracy.
- Flicker-Free Output: The LED bulbs are designed to be flicker-free, making them suitable for high-frame-rate video recording (e.g., 4K 60fps or 1080P 30fps) without introducing strobing effects.

Figure 4.1: The RALENO PS080 Softbox Lighting Kit in operation.
5. Maintenance
- Cleaning:
Wipe the exterior of the softboxes and light stands with a soft, dry cloth. For the diffuser cloth, hand wash with mild soap and water if necessary, and air dry. Do not use harsh chemicals or abrasive cleaners.
- Bulb Replacement:
Ensure the light is unplugged and the bulb has cooled down before attempting to replace it. Screw in a new 50W E27 base LED bulb. Use only compatible bulbs to avoid damage.
- Storage:
Disassemble the softboxes and collapse the light stands for compact storage in the provided nylon handbag. Store in a cool, dry place away from direct sunlight and moisture.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Power cord not plugged in, switch is off, bulb is loose or faulty. | Check power connection, ensure switch is on, tighten or replace bulb. |
| Light is too harsh/shadows are strong. | Diffuser cloth not attached or improperly positioned. | Attach the white diffuser cloth to the front of the softbox. Adjust the distance of the light from the subject. |
| Light stand is unstable. | Legs not fully extended, locking knobs not tightened. | Ensure stand legs are fully spread and all locking knobs are securely tightened. |
| Flickering in video recordings. | Rare with LED bulbs, but could be power fluctuation or incompatible camera settings. | Ensure stable power supply. Check camera's shutter speed and frame rate settings to match lighting frequency (e.g., 1/60s for 60Hz regions). |
7. Specifications
- Model Number: PS080
- Softbox Dimensions: 16 x 16 inches
- LED Bulb Power: 50W (equivalent)
- Color Temperature: 5500K (Daylight Balanced)
- Color Rendering Index (CRI): 95
- Light Stand Adjustable Height: 16.5 inches to 60 inches
- Material: Aluminum (stand), Nylon (softbox)
- Product Dimensions: 16.5 x 6.9 x 12.6 inches (packaged)
- Item Weight: 8.88 pounds
8. Warranty and Support
RALENO products are manufactured with high-quality materials and undergo rigorous quality control. For warranty information, technical support, or any inquiries regarding your product, please refer to the contact information provided on the product packaging or visit the official RaLeno website. Please retain your proof of purchase for warranty claims.