ILIFE W90 Cordless Wet Dry Vacuum Cleaner User Manual

1. Introduction

Thank you for choosing the ILIFE W90 Cordless Wet Dry Vacuum Cleaner. This all-in-one device is designed to simplify your floor cleaning routine by vacuuming and mopping hard surfaces simultaneously. Please read this manual thoroughly before operation to ensure safe and efficient use of your new appliance.

Important Safety Instructions

• Always use the appliance on a stable, level surface.
• Do not immerse the main unit in water or other liquids.
• Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
• Use only the charging adapter provided by ILIFE.
• Do not use the appliance to pick up flammable or combustible liquids, or anything that is burning or smoking.
• Ensure both clean and dirty water tanks are properly installed before operation.
• This appliance is for household use only.

2. Package Contents

Please check the box for the following items:

• ILIFE W90 Main Unit
• Charging Dock
• Power Adapter
• Cleaning Tool
• Sponge Filter
• Cleaning Fluid (sample)
• Instruction Manual
• Warranty Card

Image: All components included in the ILIFE W90 package.

3. Product Overview

The ILIFE W90 features an integrated design for efficient cleaning.

Image: The ILIFE W90 Cordless Wet Dry Vacuum Cleaner.

Key Features:

• Wet Dry Vacuum Mop All In One: Simultaneously vacuums and mops hard floors, leaving them dry and stain-free.
• Intelligent Voice Prompting System: Provides real-time voice broadcasts for working status and fault alerts, making operation intuitive.
• Dual Water Tank Separation Design: Features separate clean (700ml) and dirty (500ml) water tanks to ensure continuous cleaning with fresh water and prevent secondary pollution.
• One Button Self-Cleaning: Automatically cleans the roller brush with a single button press when placed on the charging tray.

Image: High-capacity dual tank system for clean and dirty water.

Image: Smart voice and light reminders for various operational statuses.

4. Setup and Initial Use

4.1 Assembly

1. Insert the handle into the main unit until it clicks into place.
2. Ensure the clean water tank and dirty water tank are securely in their positions.

4.2 Charging

1. Place the ILIFE W90 on the charging dock.
2. Connect the power adapter to the charging dock and plug it into a wall outlet.
3. The indicator light on the unit will show charging status. Fully charge the unit before first use (approximately 30 minutes runtime on a full charge).

4.3 Filling the Clean Water Tank

1. Remove the clean water tank from the main unit.
2. Open the tank cap and fill with clean tap water. You may add a small amount of the provided cleaning fluid. Do not exceed the MAX fill line.
3. Close the cap securely and reinsert the tank into the main unit until it clicks.

5. Operating Instructions

5.1 Powering On/Off

Press the power button on the handle to turn the unit on or off.

5.2 Wet Vacuuming and Mopping

The ILIFE W90 is designed to vacuum and mop hard floors simultaneously. Ensure the clean water tank is filled and the dirty water tank is empty before starting.

Image: The ILIFE W90 effectively cleaning various types of messes on a hard floor.

Move the vacuum cleaner slowly over the floor surface. The brush roll will dispense clean water and cleaning solution, scrub the floor, and then suction the dirty water back into the dirty water tank. It is suitable for various hard floor types including hardwood, marble, laminate, and tile.

Image: Multi-surface cleaning capability on hardwood, marble, laminate, and tile.

5.3 Dry Vacuuming

While primarily a wet-dry cleaner, the W90 can also pick up dry debris. For optimal dry vacuuming, ensure the dirty water tank is empty and the clean water tank is not overfilled, or use it without water for light dry messes.

5.4 Voice Prompts

The intelligent voice prompting system will provide real-time updates on the vacuum's status, such as low battery, tank full/empty, or brush roll issues. Follow the voice prompts for optimal performance.

Image: The ILIFE W90 offers up to 30 minutes of runtime on a single charge.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your ILIFE W90.

6.1 One-Button Self-Cleaning

After each use, place the W90 on its charging tray. Press the self-clean button, and the machine will automatically clean the roller brush for one minute. This helps prevent odors and keeps the brush ready for the next cleaning.

Image: One-click self-cleaning function for the roller brush.

6.2 Emptying the Dirty Water Tank

It is crucial to empty the dirty water tank after every use to prevent odors and maintain hygiene. Remove the tank, open the lid, and dispose of the dirty water. Rinse the tank thoroughly with clean water.

6.3 Cleaning the Roller Brush

Even with self-cleaning, periodically remove and manually clean the roller brush to remove any tangled hair or debris. Use the provided cleaning tool for assistance.

6.4 Cleaning the Filter

The sponge filter should be rinsed with water regularly and allowed to air dry completely before reinstallation. Replace the filter every 3-6 months depending on usage.

6.5 Storage

Store the ILIFE W90 in a cool, dry place. Ensure the dirty water tank is empty and clean, and the unit is fully charged before storing for extended periods.

7. Troubleshooting

If you encounter issues with your ILIFE W90, please refer to the table below for common problems and solutions.

8. Specifications

9. Warranty and Support

Your ILIFE W90 comes with a worry-free 12-month warranty. Please refer to the warranty card included in your package for detailed terms and conditions.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please visit the official ILIFE website or contact their customer service. Keep your purchase receipt and warranty card handy for any warranty claims.

ILIFE Official Store: Visit the ILIFE Store on Amazon