1. Introduction
Thank you for choosing the TRIO Arino LED Wall Light. This modern luminaire combines matte black metal with natural wood, creating a warm and inviting atmosphere. Featuring integrated energy-efficient LED technology and a convenient switch dimmer function, this wall light is designed for optimal illumination and ease of use in indoor environments.
2. Safety Instructions
- Electrical Safety: Always disconnect the power supply at the main circuit breaker before installation, maintenance, or cleaning. Installation should be performed by a qualified electrician to ensure safety and compliance with local regulations.
- Indoor Use Only: This product has an IP20 rating, indicating it is protected against solid objects larger than 12.5mm but has no protection against water. It is suitable for dry indoor locations only.
- Non-Replaceable LED: The LED light source in this luminaire is not replaceable. When the light source reaches its end of life, the entire luminaire should be replaced.
- Handling: Handle the product with care to avoid damage to the light source or housing.
3. Package Contents
Please check that all components are present and undamaged:
- 1 x TRIO Arino LED Wall Light
- 1 x Set of Mounting Material (screws, wall plugs)
- 1 x Instruction Manual (this document)
4. Setup and Installation
Important: Ensure the main power supply is switched off before beginning installation.
- Preparation: Choose a suitable indoor location for the wall light. Mark the drilling points on the wall according to the luminaire's mounting plate.
- Drilling: Drill holes at the marked positions and insert the provided wall plugs.
- Wiring: Connect the electrical wires from the wall to the terminal block of the luminaire. Ensure correct polarity (Live, Neutral, Earth) as per local electrical codes. Secure the connections.
- Mounting: Attach the luminaire's mounting plate to the wall using the screws. Carefully secure the light fixture to the mounting plate.
- Final Check: Ensure all connections are secure and the luminaire is firmly mounted.
5. Operating Instructions
The TRIO Arino LED Wall Light features an integrated Switch Dimmer function, allowing you to adjust the brightness using your existing conventional wall switch. No external dimmer is required.
- Turning On (100% Brightness): Flip your wall switch ON. The light will illuminate at 100% brightness.
- Dimming to 50%: To reduce brightness, quickly flip the wall switch OFF and then ON again within 1-2 seconds. The light will now operate at 50% brightness.
- Dimming to 25%: To further reduce brightness, quickly flip the wall switch OFF and then ON again within 1-2 seconds. The light will now operate at 25% brightness.
- Turning Off: Flip the wall switch OFF.
- Cycle: The light cycles through 100% > 50% > 25% > OFF with each quick OFF/ON sequence. If the light is left OFF for more than 5 seconds, it will reset to 100% brightness when turned ON again.
6. Maintenance
To maintain the appearance and functionality of your TRIO Arino LED Wall Light:
- Cleaning: Ensure the power is off before cleaning. Wipe the surface with a soft, dry, or slightly damp cloth.
- Avoid Chemicals: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish of the metal and wood.
- Dust Removal: Regularly dust the luminaire to prevent accumulation that could affect light output.
7. Troubleshooting
If you encounter issues with your TRIO Arino LED Wall Light, please refer to the following common problems and solutions:
- Light Does Not Turn On:
- Check if the main power supply is switched ON.
- Verify that the wall switch is in the ON position.
- Ensure all electrical connections are secure (consult a qualified electrician if unsure).
- Dimmer Function Not Working:
- Ensure you are performing the quick OFF/ON sequence correctly within 1-2 seconds to cycle through brightness levels.
- If the light was OFF for an extended period, it will reset to 100% brightness upon the first ON. Try the OFF/ON sequence again.
- Flickering Light:
- Check for loose wiring connections.
- Ensure the voltage supply is stable and within the specified range.
If these steps do not resolve the issue, please contact customer support or a qualified electrician.
8. Specifications
| Feature | Specification |
|---|---|
| Brand | TRIO |
| Model Number | 224810132 |
| Product Dimensions (L x W x H) | 12.2 cm x 11.5 cm x 12.0 cm |
| Item Weight | 400 g |
| Material | Metal, Wood |
| Color | Matte Black |
| Style | Modern |
| Bulb Type | Integrated LED |
| Number of Bulbs | 1 |
| Power | 4.3 Watts |
| Luminous Flux | 430 Lumen |
| Color Temperature | 3000 Kelvin (Warm White) |
| Average Lifespan | 50,000 hours |
| Voltage | 230 Volts |
| Switch Style | Integrated Switch Dimmer (3-step) |
| Installation Type | Wall Mount |
| Certification | IP20 |
| Energy Efficiency Class | F |
| Indoor/Outdoor Use | Indoor Use Only |
9. Warranty
This product is covered by the manufacturer's standard warranty. Please refer to the terms and conditions provided at the point of purchase or contact your retailer for specific warranty details. Keep your proof of purchase for any warranty claims.
10. Support
For technical assistance, troubleshooting beyond this manual, or inquiries regarding spare parts, please contact your retailer or the TRIO Lighting customer service. Contact information can typically be found on the product packaging or the manufacturer's official website.
