1. Introduction
This manual provides essential instructions for the safe and effective use of your Tiskgg 4.5 cu ft Extra Large Fireproof Safe Box. Please read this manual thoroughly before installation and operation to ensure proper functionality and security.
The Tiskgg safe is designed to protect your valuables with its robust construction, fireproof capabilities, and secure combination lock system. It features a spacious interior with a double-door design and an inner cabinet for organized storage.
Safety Information
- Do not store emergency keys inside the safe. Keep them in a secure, separate location.
- Ensure the safe is placed on a stable, level surface or securely mounted to a wall.
- Keep children away from the safe, especially during operation.
- Regularly check battery levels to ensure continuous operation of the electronic lock.
2. Package Contents
Verify that all items listed below are included in your package:
- Tiskgg 4.5 cu ft Fireproof Safe Box
- Emergency Keys (2 sets)
- Mounting Bolts (for wall installation)
- Removable Shelf
- Instruction Manual
Figure 2.1: Safe with emergency key and digital keypad.
3. Setup and Installation
3.1 Initial Opening
Upon receiving your safe, use the emergency key to open it for the first time. Insert the emergency key into the keyhole located behind the digital keypad cover (if applicable) or directly on the lock, then turn the knob to open the door.
3.2 Battery Installation
The electronic lock requires batteries for operation. Locate the battery compartment, typically on the inside of the door or behind the keypad. Insert the required number of AA batteries (not included), ensuring correct polarity. If the red and green indicator lights on the panel illuminate simultaneously, it indicates low battery voltage, and batteries should be replaced promptly.
3.3 Setting the Combination Lock
- With the safe door open, locate the password reset button on the inside of the door (refer to Figure 3.1).
- Press the reset button. The indicator light on the keypad will illuminate.
- Enter your desired 1-8 digit password on the keypad.
- Press the "#" key to confirm. The indicator light will turn off, confirming the new password is set.
- Test the new password with the door open before closing it.
Figure 3.1: Inner door detail showing password reset button and key hooks.
3.4 Wall Mounting (Optional)
For enhanced security, the safe can be mounted to a wall. Mounting bolts are provided. Follow these steps:
- Choose a suitable location on a solid wall.
- Mark the drilling points through the pre-drilled holes at the back of the safe.
- Drill holes into the wall at the marked positions.
- Insert expansion screws into the drilled holes.
- Align the safe with the holes and secure it using the provided mounting bolts.
Figure 3.2: Wall mounting instructions diagram.
4. Operating Instructions
4.1 Opening the Safe
There are two methods to open your Tiskgg safe:
- Using the Combination Lock: Enter your 1-8 digit password, then turn the knob clockwise to open the door.
- Using the Emergency Key: Insert the emergency key into the keyhole, turn it, and simultaneously turn the knob clockwise to open the door. This method is used for initial opening or if the batteries are depleted.
Figure 4.1: Methods for opening the safe.
4.2 Interior Features
- Removable Shelf: The safe includes a removable shelf that can be adjusted to accommodate items of various sizes.
- Inner Cabinet Box: A hidden lock box is located at the bottom of the safe, providing an additional layer of security and privacy for smaller, highly valuable items.
- Door Hooks: Ten hooks are provided on the inside of the door for organizing keys or small jewelry.
- Sensor Light: An internal LED sensor light illuminates when the safe door is opened, improving visibility of the contents.
Figure 4.2: Interior layout and hidden compartment.
5. Maintenance
5.1 Battery Replacement
When the red and green indicator lights on the keypad illuminate simultaneously, it signifies low battery power. Replace all batteries in the compartment with new AA batteries to ensure continued functionality of the electronic lock.
5.2 Cleaning
To clean the exterior of your safe, use a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish. For the interior, a dry cloth is sufficient.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Safe does not open with PIN code. | Incorrect PIN entered; low batteries. | Re-enter PIN carefully. Replace batteries if indicator lights show low power. Use emergency key if necessary. |
| Red and green lights flash simultaneously. | Low battery voltage. | Replace all batteries immediately. |
| Forgotten PIN code. | PIN code cannot be recalled. | Use the emergency key to open the safe. Reset the PIN code using the reset button inside the door. |
| Safe door does not close properly. | Obstruction in the door frame; bolts not fully retracted. | Check for any obstructions. Ensure the knob is turned to retract bolts before closing. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Tiskgg |
| Model Number | 2f325011-df32-4d0e-a747-4bb0678e0170 |
| Product Dimensions (D x W x H) | 14" x 14.5" x 29" |
| Internal Capacity | 4.5 Cubic Feet |
| Item Weight | 82.7 pounds |
| Lock Type | Combination (Electronic Keypad) |
| Material | Alloy Steel |
| Special Features | Fireproof, Sensor Light, Double Door, Inner Cabinet Box, Key Hooks |
| Mounting Type | Wall Mount (optional) |
| Batteries Required | Yes (AA, not included) |
Figure 7.1: Product dimensions and hidden compartment.
Figure 7.2: Door construction and security features.
8. Warranty and Support
Tiskgg offers a lifetime warranty service for this product, demonstrating our commitment to quality and customer satisfaction. Additionally, a 90-day return policy is available.
Should you encounter any questions or require assistance, please contact our customer support team. We are dedicated to resolving any issues within 24 hours.
Contact information for support is typically found on the product packaging or the retailer's website.
