Introduction
This manual provides comprehensive instructions for the Azwok GB094WJSA replacement remote control, designed for use with various Sharp Aquos TV models. This remote control offers the primary functions of the original remote without requiring any programming.
Compatible Sharp Aquos TV Models:
- LC-32LE150M, LC-32LE155M, LC-32LE155X, LC-32LE355M
- LC-39LE155M, LC-39LE155X
- LC-40LE355M
- LC-60LE360X, LC-60LE650X, LC-60LE660X
- LC-70LE360X, LC-70LE650X, LC-70LE660X
Note: If your specific TV model is not listed, please consult the product listing or contact customer support to confirm compatibility.
Setup: Battery Installation
The remote control requires two AAA batteries (not included) for operation. Follow these steps to install the batteries:
- Locate the battery compartment on the back of the remote control.
- Press down on the tab and slide the battery cover downwards to open it.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery cover back into place until it clicks securely.
Image: Rear view of the remote control with the battery cover removed, illustrating the correct orientation for AAA battery insertion.
Once batteries are installed, the remote is ready for use with your compatible Sharp Aquos TV. No additional programming is required.
Operating Instructions
This section details the primary functions of the buttons on your Azwok GB094WJSA replacement remote control.
Image: Front view of the remote control, highlighting the layout of all functional buttons.
Button Functions:
| Button | Function |
|---|---|
| POWER (Red) | Turns the TV on or off. |
| COLOUR ADJ. (FREEZE) (Blue) | Adjusts color settings or freezes the screen. |
| ECO (Green) | Activates or deactivates eco mode for power saving. |
| SLEEP (Red) | Sets the sleep timer for automatic TV shutdown. |
| HDMI (Orange) | Selects HDMI input source. |
| PHOTO (Yellow) | Accesses photo viewing mode. |
| Number Buttons (0-9) | Direct channel selection or numerical input. |
| INPUT | Cycles through available input sources. |
| VOL +/- (Blue) | Adjusts the volume level up or down. |
| CH ^ / v (Green) | Changes the channel up or down. |
| DISPLAY | Displays on-screen information. |
| MUTE (Speaker icon) | Mutes or unmutes the TV audio. |
| MENU | Opens the TV's main menu. |
| MPX | Activates multiplex audio options. |
| Navigation Arrows (Up, Down, Left, Right) | Navigates through menus and options. |
| ENTER | Confirms selections in menus. |
| RETURN | Goes back to the previous screen or menu. |
| ATV/DTV | Switches between Analog TV and Digital TV modes. |
| Color Buttons (R, G, Y, B) | Accesses specific functions within menus or applications, as indicated on-screen. |
| EPG | Opens the Electronic Program Guide. |
| GUIDE | Opens the program guide. |
| INFO | Displays information about the current program or input. |
| RADIO | Switches to radio mode (if supported by TV). |
Maintenance
Cleaning the Remote Control:
To maintain the remote control's appearance and functionality, clean it regularly:
- Use a soft, dry cloth to wipe the surface of the remote.
- For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid excessive moisture.
- Do not use harsh chemicals, solvents, or abrasive cleaning pads, as these can damage the remote's finish or internal components.
Battery Replacement:
Replace batteries when the remote control's response becomes sluggish or stops working. Always replace both batteries at the same time with new AAA batteries. Do not mix old and new batteries, or different types of batteries, as this can lead to leakage or malfunction.
Dispose of used batteries according to local regulations.
Troubleshooting
If you experience issues with your remote control, refer to the following common solutions:
| Problem | Possible Cause / Solution |
|---|---|
| Remote control is not working. |
|
| Some buttons are not responding. |
|
| TV is not responding consistently. |
|
If these steps do not resolve the issue, please refer to the Warranty and Support section for further assistance.
Specifications
| Model Number | RM-GB094WJSA-SP002 |
| Brand | Azwok |
| Compatible Devices | Sharp Aquos Televisions (specific models listed in Introduction) |
| Connectivity Technology | Infrared (IR) |
| Power Source | 2 x AAA Batteries (not included) |
| Product Dimensions | 6.69 x 1.97 x 0.59 inches |
| Item Weight | 2.65 ounces |
| Special Feature | No Programming Required |
Warranty and Support
Warranty Information:
This Azwok replacement remote control comes with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and ensures the remote functions as described. If the remote control fails to operate with your compatible device within this period, you may be eligible for a replacement or refund.
The warranty does not cover damage caused by misuse, accidental damage, or unauthorized repairs.
Customer Support:
For technical assistance, warranty claims, or inquiries regarding product compatibility, please contact Azwok customer support through the retailer where the product was purchased. Please have your purchase details and product model number (RM-GB094WJSA-SP002) available when contacting support.