1. Introduction

This instruction manual provides detailed guidance for the installation, operation, maintenance, and troubleshooting of your ASUS ROG Strix B760-I Gaming WiFi mini-ITX motherboard. Designed for Intel 13th and 12th Gen processors, this motherboard offers robust power delivery, efficient cooling, and advanced connectivity for a high-performance compact PC build.

2. Product Overview

2.1 Key Features

• Intel LGA 1700 Socket: Ready for 13th Gen Intel Core, and 12th Gen Intel Core, Pentium Gold, and Celeron Processors.
• Robust Power Solution: 8 + 1 power stages rated for 80A, ProCool power connector, high-quality alloy chokes, and durable capacitors.
• Optimized VRM Thermals: Thick heatsinks bridged to the VRM with high-conductivity thermal pads, and an integrated I/O cover for added surface area.
• Ample M.2 Support: Two PCIe 4.0 M.2 slots, one with a heatsink, and the other strategically placed on the rear.
• Next-Gen Networking: On-board Intel Wi-Fi 6E (802.11ax) and Intel 2.5G Ethernet with ASUS LANGuard.
• Bluetooth: Version 5.3.

2.2 Motherboard Components

2.2.1 Built for Speed and Expansion

• CPU Socket: Intel LGA 1700 for 13th and 12th Gen Intel Core processors.
• Power Delivery: 8 + 1 power stages with ProCool power connector.
• Memory Slots: 2 x DDR5 Dual Channel DIMM slots, supporting up to 7600 MT/s (OC) and 96GB capacity.
• Expansion Slot: 1 x PCIe 5.0 x16 SafeSlot for graphics cards.
• M.2 Slots: Two PCIe 4.0 M.2 slots for high-speed storage.

2.2.2 Comprehensive Cooling

• VRM Cooling Array: Large heatsinks for efficient heat dissipation from voltage regulator modules.
• M.2 Heatsink: Dedicated heatsink with backplate for the primary M.2 slot to prevent thermal throttling.
• Chipset Heatsink: Ensures stable operation of the B760 chipset.
• Fan Headers: Includes 4-pin PWM Chassis Fan Header, CPU Fan Header, and AIO Pump Header for comprehensive cooling control.

2.2.3 Total Gaming Immersion

• Audio: SupremeFX S1220A Codec + Savitech SV3H712 AMP for high-fidelity audio, featuring impedance sense, 120 dB SNR stereo playback, 113 dB SNR recording, and SupremeFX shielding.
• RGB Headers: 1 x 3-Pin Addressable Gen 2 RGB Header and 1 x 4-Pin Aura RGB Header for customizable lighting effects.

2.2.4 Full Connectivity

• Rear I/O Ports: 1 x HDMI® Port, 1 x DisplayPort, 3 x USB 2.0 Ports (3 x Type-A), 4 x USB 3.2 Gen 1 Ports (3 x Type-A + 1 x USB Type-C®), 1 x USB 3.2 Gen 2x2 (USB Type-C®), Intel® 2.5G Ethernet Port, Wi-Fi 6E, 5 x Audio Jacks.
• Internal Headers: 1 x USB 3.2 Gen 2 Front Panel Connector, 1 x USB 3.2 Gen 1 Header (Supports 2 USB 3.2 Gen 1 Ports), 1 x USB 2.0 Header (Supports 2 x USB 2.0 Ports), 4 x SATA 6Gb/s Ports.

2.2.5 What's in the Box

• ASUS ROG Strix B760-I Gaming WiFi Motherboard
• User Manual
• ROG Strix Stickers & Thank You Card
• ROG Key Chain
• Thermal Pad
• SATA Cables

2.3 Product Videos

3. Setup

3.1 Pre-Installation Checklist

• Ensure you have all necessary components: CPU, CPU cooler, DDR5 RAM, M.2 SSDs, power supply, graphics card (if not using integrated graphics), and PC case.
• Gather tools: Phillips-head screwdriver, anti-static wrist strap (recommended).
• Read the full manual before starting.

3.2 Motherboard Installation

1. Prepare the Case: Install standoffs in your mini-ITX case according to the motherboard's mounting holes.
2. Install CPU: Open the CPU socket lever, align the CPU with the socket (triangle mark on CPU matches socket), gently place the CPU, and close the lever.
3. Install CPU Cooler: Follow the cooler manufacturer's instructions to install the CPU cooler. Apply thermal paste if not pre-applied.
4. Install RAM: Open the clips on the DDR5 DIMM slots, align the RAM modules with the notch, and press firmly until the clips lock into place.
5. Install M.2 SSDs: For the front M.2 slot, remove the heatsink, insert the M.2 SSD, secure it with the Q-Latch mechanism, and reattach the heatsink. For the rear M.2 slot, insert the SSD and secure it with the provided screw.
6. Mount Motherboard: Carefully place the motherboard into the case, aligning the I/O shield with the case opening and the mounting holes with the standoffs. Secure with screws.
7. Install Graphics Card: Insert the PCIe 5.0 x16 graphics card into the slot until it clicks. Secure it to the case with screws.
8. Connect Power Supply: Connect the 24-pin ATX power connector and the 8-pin CPU power connector to the motherboard. Connect PCIe power cables to the graphics card.
9. Connect Peripherals: Connect front panel headers (USB, audio, power/reset buttons, LEDs), SATA cables, and case fans.

4. Operating Your System

4.1 First Boot-Up

• After assembly, connect your monitor, keyboard, and mouse.
• Power on your system. The system should display the ASUS ROG logo and enter the BIOS/UEFI interface.

4.2 BIOS/UEFI Setup

• Press DEL or F2 during boot to enter BIOS.
• Configure boot order to install your operating system from a USB drive or optical media.
• Enable XMP/EXPO for optimal RAM performance if your memory supports it.
• Save changes and exit BIOS.

4.3 Driver Installation and Software

• After OS installation, install all necessary drivers from the ASUS support website or the provided driver DVD/USB.
• Install ASUS Armoury Crate for system monitoring, RGB control (Aura Sync), fan control (Fan Xpert 4), and driver/utility updates.
• Utilize GameFirst for network optimization and ASUS WiFi Q-Antenna for optimal Wi-Fi signal strength.

5. Maintenance

5.1 Cleaning

• Regularly clean dust from the motherboard, CPU cooler, and case fans using compressed air.
• Ensure the system is powered off and unplugged before cleaning.

5.2 BIOS Updates

• Periodically check the ASUS support website for BIOS updates to improve system stability, compatibility, and performance.
• Use the BIOS FlashBack feature for convenient BIOS updates without a CPU or RAM installed.

6. Troubleshooting

6.1 Common Issues and Solutions

• No Power/No Boot:
  • Check all power connections (24-pin ATX, 8-pin CPU, GPU).
  • Ensure the power supply is switched on.
  • Verify front panel power button connection.
• No Display:
  • Ensure monitor is connected to the graphics card (or motherboard if using integrated graphics).
  • Reseat graphics card and RAM modules.
  • Try a different display cable or monitor.
• System Instability/Crashes:
  • Update BIOS and drivers to the latest versions.
  • Check RAM for errors using memory diagnostic tools.
  • Monitor CPU and GPU temperatures to prevent overheating.
• Slow Performance:
  • Ensure M.2 SSDs are properly installed and drivers are up-to-date.
  • Verify XMP/EXPO profile is enabled for RAM.
  • Check for background applications consuming resources.

6.2 Clear CMOS

If your system encounters issues after changing BIOS settings, you can clear the CMOS to restore default settings. Locate the Clear CMOS button on the rear I/O panel and press it while the system is powered off and unplugged.

7. Specifications

8. Warranty and Support

8.1 Warranty Information

ASUS products are manufactured to the highest quality standards. For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official ASUS support website.

8.2 Technical Support

For technical assistance, driver downloads, or further product information, please visit the official ASUS support website:

www.asus.com/support/

You can also contact ASUS customer service for direct support.