1. Introduction and Overview
Thank you for choosing the Darkaway Industrial Pendant Light Fixtures. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.
These pendant light fixtures feature a faux wood painted iron top and a hammered metal shade, designed to complement various interior styles including farmhouse and industrial aesthetics. They are suitable for spaces such as kitchen islands, dining areas, bedrooms, living rooms, hallways, and entryways. The fixtures are ETL listed for safety and include an adjustable cord for customizable hanging height.
Image: Darkaway Industrial Pendant Light Fixture, highlighting its design and components.
2. What's in the Box
Upon opening the package, please verify that all components are present and undamaged:
- Pendant Light Fixture(s) (Model 6G10H-2PK BK)
- Mounting Hardware (screws, wire nuts, mounting plate)
- Instruction Manual
3. Safety Information
WARNING: RISK OF ELECTRIC SHOCK. Ensure power is turned off at the circuit breaker before installation or servicing.
- This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Consult a qualified electrician if you are unsure about the installation process.
- Do not exceed the maximum wattage specified for the bulb.
- The fixture is ETL listed, ensuring it meets safety standards.
4. Setup and Installation
The pendant light fixture is designed for easy installation. Follow these general steps:
- Turn off Power: Before starting, ensure the power supply to the installation area is turned off at the circuit breaker.
- Prepare Mounting: Attach the mounting plate to the junction box in the ceiling using the provided screws.
- Adjust Height: The pendant light features an adjustable cord. Determine the desired hanging height and adjust the cord length accordingly. Secure the cord in place using the provided mechanism within the canopy. The maximum adjustable height is 71 inches.
- Wire Connections: Connect the fixture's wires to the corresponding household wires (black to black, white to white, ground to ground) using the wire nuts.
- Secure Canopy: Carefully push the canopy up to the ceiling, covering the junction box, and secure it with the provided screws.
- Install Bulb: Screw in one E26 base bulb (not included) into the lamp socket. The fixture is compatible with LED, CFL, incandescent, and halogen bulbs, up to 60 watts maximum.
- Restore Power: Once installation is complete, turn the power back on at the circuit breaker.
Image: Adjustable height feature and dimensions of the pendant light.
Installation Video Guide
Video: Official Darkaway installation guide for the Black Hammered Shade Pendant Light Fixtures, demonstrating unboxing and setup steps.
5. Operating Instructions
To operate your Darkaway Industrial Pendant Light Fixture:
- Ensure a compatible E26 bulb (max 60W) is correctly installed in the socket.
- Turn on the wall switch connected to the fixture.
The light fixture is controlled by a standard wall switch (push button type) and does not feature integrated dimming unless used with a dimmable bulb and compatible dimmer switch (sold separately).
6. Maintenance
Regular maintenance will help preserve the appearance and functionality of your light fixture.
- Cleaning: Disconnect power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents as they may damage the finish.
- Bulb Replacement: Disconnect power before replacing the bulb. Allow the bulb to cool completely. Unscrew the old bulb and replace it with a new E26 base bulb (max 60W).
7. Troubleshooting
If you encounter issues with your pendant light fixture, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | 1. Power is off 2. Bulb is loose or faulty 3. Incorrect wiring | 1. Check circuit breaker and wall switch 2. Tighten or replace bulb 3. Consult a qualified electrician to check wiring connections |
| Light flickers | 1. Loose bulb 2. Incompatible dimmer switch/bulb | 1. Tighten bulb 2. Ensure bulb and dimmer are compatible, or replace bulb/dimmer |
If the problem persists after attempting these solutions, please contact Darkaway customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Darkaway |
| Model Number | 6G10H-2PK BK |
| Material | Metal (Iron), Wood |
| Style | Industrial |
| Light Fixture Form | Pendant |
| Room Type | Bedroom, Dining Room, Guest Room, Hallway, Kitchen, Living Room, Lobby |
| Indoor/Outdoor Usage | Indoor |
| Power Source | Corded Electric |
| Special Features | Adjustable Height |
| Control Method | Wall Switch (Push Button) |
| Light Source Compatibility | Fluorescent, Halogen, Incandescent, LED |
| Number of Light Sources | 1 per fixture (2 fixtures included in 2-pack) |
| Voltage | 120 Volts |
| Max Wattage | 60 watts |
| Bulb Base | E26 |
| Brightness | 800 lumen (bulb dependent) |
| Mounting Type | Ceiling Mount (Semi Flush Mount) |
| Dimensions (L x W x H) | 12.4"L x 12.4"W x 8.6"H (per fixture) |
| Certification | ETL Listed |
9. Warranty
The Darkaway Industrial Pendant Light Fixtures come with a 1-year limited manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.
10. Support
For further assistance, technical support, or warranty inquiries, please contact Darkaway customer service through the retailer where the product was purchased or visit the official Darkaway website for contact information.