Moby-System KRZES WOODY NATURAL

Moby-System Adjustable Wooden High Chair Instruction Manual

Model: KRZES WOODY NATURAL

1. Introduction

Thank you for choosing the Moby-System Adjustable Wooden High Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your high chair. Designed for children from 6 months up to 12 years, this chair adapts to your child's growth, ensuring comfort and safety during meal times and other activities. Please read these instructions carefully before use and retain them for future reference.

2. Safety Information

Your child's safety is paramount. Always follow these safety guidelines:

  • Always use the 3-point safety harness to secure your child in the high chair.
  • Never leave your child unattended in the high chair.
  • Ensure the high chair is placed on a stable, level surface.
  • Keep children away from the high chair during assembly to prevent injury.
  • Regularly check all screws and fittings to ensure they are securely tightened.
  • Do not use the high chair if any parts are broken, torn, or missing.
  • This product complies with the European standard EN 14988.
  • Maximum recommended weight for children using the tray is 15 kg. For lower levels without the tray, the maximum load is 35 kg.

3. Package Contents

Before assembly, please verify that all components are present:

  • Wooden high chair frame (various wooden parts)
  • 3-point safety harness
  • Removable wooden tray
  • 2 comfortable cushions (seat and backrest)
  • Adjustable footrest
  • Assembly hardware (screws, nuts, etc.)
  • Instruction manual
Front view of the Moby-System high chair with light grey cushions installed on the seat and backrest.

Image: The Moby-System high chair fully assembled with its comfortable cushions.

4. Assembly Instructions

The Moby-System high chair requires assembly. Follow these steps carefully. It is recommended to have a screwdriver set in addition to any provided tools for easier assembly.

  1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
  2. Assemble Side Frames: Attach the horizontal support bars to the vertical side frames using the provided screws. Ensure all connections are snug but do not overtighten initially.
  3. Install Seat and Footrest Rails: Slide the seat and footrest rails into the designated slots on the side frames. These rails are adjustable, so ensure they are inserted correctly into the desired height levels.
  4. Attach Backrest: Secure the backrest to the upper part of the side frames.
  5. Mount Tray Supports: Attach the tray support arms to the front of the high chair.
  6. Secure All Fasteners: Once all parts are in place, systematically tighten all screws and fasteners. Do not overtighten to avoid damaging the wood.
  7. Attach Cushions and Harness: Place the comfortable cushions on the seat and backrest. Install the 3-point safety harness according to the instructions provided with the harness.
Back view of the Moby-System high chair showing adjustment slots for seat and footrest.

Image: Back view of the high chair, illustrating the adjustable slots for the seat and footrest components during assembly.

Side view of the Moby-System high chair, highlighting the multiple adjustment slots for the seat and footrest.

Image: Side view of the high chair, showing the various slots for height adjustment of the seat and footrest.

5. Operation and Adjustments

The Moby-System high chair is designed to grow with your child. It features 12 adjustable levels for both the seat and footrest, and a removable tray.

5.1 Adjusting Seat and Footrest Height

To adjust the height of the seat or footrest:

  1. Loosen the screws securing the seat or footrest board on both sides.
  2. Carefully slide the board out of its current slot.
  3. Reinsert the board into the desired height slot. There are 12 available levels to accommodate your child's growth.
  4. Tighten the screws securely on both sides. Ensure both sides are at the same level.
Three stages of the Moby-System high chair: for 6 months+, 6-36 months, and 3-12 years, showing different seat and footrest configurations.

Image: The high chair configured for different age groups: infants (6m+), toddlers (6-36m), and older children (3-12y), demonstrating its adjustability.

5.2 Using and Removing the Tray

The wooden tray provides a convenient surface for meals and activities.

  • Attaching the Tray: Align the tray with the support arms and slide it into place until it clicks securely.
  • Removing the Tray: Press the release buttons (if applicable, or lift and slide) on both sides of the tray supports and pull the tray forward. This allows your child to sit directly at the family table.
A young child seated in the Moby-System high chair with the wooden tray in use, holding a spoon and small bowls of food.

Image: A child enjoying a meal in the high chair with the removable tray attached.

An older child using the Moby-System high chair at a standard desk, demonstrating its use without the tray.

Image: The high chair used by an older child at a desk, illustrating its adaptability as a regular chair.

6. Maintenance and Care

Proper care will extend the life of your Moby-System high chair.

  • Cleaning: Wipe down wooden surfaces with a damp cloth and mild soap. Dry immediately with a soft cloth. Do not use abrasive cleaners or harsh chemicals.
  • Cushions: The cushions can be removed for cleaning. Follow the care instructions on the cushion labels. Typically, hand wash or machine wash on a gentle cycle with cold water, and air dry.
  • Harness: Clean the safety harness with a damp cloth and mild soap. Allow it to air dry completely before reattaching.
  • Inspection: Periodically inspect all parts for wear, damage, or loose fasteners. Tighten any loose screws. Replace any damaged parts immediately.
  • Storage: Store the high chair in a dry place, away from direct sunlight and extreme temperatures, to prevent wood warping or damage.

7. Troubleshooting

If you encounter any issues with your high chair, please refer to these common solutions:

  • Chair feels wobbly: Ensure all assembly screws are fully tightened. Check that the high chair is on a flat, stable surface.
  • Seat/Footrest difficult to adjust: Loosen the securing screws completely before attempting to slide the boards. Ensure no debris is obstructing the adjustment slots.
  • Tray does not attach securely: Verify that the tray support arms are correctly installed and that the tray is aligned properly before pushing it into place. Check for any obstructions.
  • Missing parts: If you find any parts missing upon unpacking, please contact Moby-System customer support immediately.

8. Product Specifications

FeatureDetail
BrandMoby-System
Model NumberKRZES WOODY NATURAL
MaterialBeech Wood
Product Dimensions (L x W x H)32P x 44l x 87H centimeters (approx. 32 x 44 x 87 cm)
Age Range (Description)Child (6 months to 12 years)
Maximum Weight Recommendation (with tray)15 Kilograms
Maximum Weight Recommendation (without tray, lower levels)35 Kilograms
Assembly RequiredYes
Safety StandardEN 14988
Diagram showing the dimensions of the Moby-System high chair: 87cm height, 44cm width, 32cm depth.

Image: Visual representation of the high chair's dimensions.

9. Warranty and Support

For warranty information or customer support, please refer to the retailer where you purchased the Moby-System high chair or visit the official Moby-System website. Keep your proof of purchase for any warranty claims.

Online Support: Visit the Moby-System Store on Amazon

© 2026 Moby-System. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.