Introduction
The MECHEER Watt Meter Power Meter Plug is an upgraded home energy monitor designed to help you understand and manage the electricity usage of your appliances. This multi-function device accurately monitors power (W), electricity (kWh), voltage (V), frequency (Hz), current (A), power factor (PF), unit price ($/kWh), and total cost ($). With its clear backlight display and user-friendly features, it provides essential data for optimizing energy consumption and reducing electricity bills.
Figure 1: Front view of the MECHEER Watt Meter Power Meter Plug.
Setup
- Unboxing: Carefully remove the Watt Meter from its packaging.
- Initial Connection: Plug the Watt Meter directly into a standard US wall socket (120V/60Hz). The LCD display will illuminate.
- Connect Appliance: Plug the appliance you wish to monitor into the socket on the front of the Watt Meter.
Figure 2: Key components of the Watt Meter, including the LCD display, control buttons, and standard US plug/socket.
Operating Instructions
8 Display Modes
The Watt Meter features 8 display modes, allowing you to view various electrical parameters. Press the "M" button to cycle through the modes:
- Mode 1: Power (W)
- Mode 2: Electricity (kWh)
- Mode 3: Voltage (V)
- Mode 4: Frequency (Hz)
- Mode 5: Current (A)
- Mode 6: Power Factor (PF)
- Mode 7: Unit Price ($/kWh)
- Mode 8: Total Cost ($)
Figure 3: Visual representation of the 8 different display modes available on the Watt Meter.
Electricity Price Settings
To set the electricity unit price ($/kWh):
- Press and hold the "SET" button for 3 seconds to enter the electricity price setting mode.
- Press the "M" button to select the digit location you wish to change.
- Press the "UP" button to adjust the number.
- Press the "M" button again to save the price settings.
Backlight Function
The LCD display features a white backlight for clear readability. The backlight automatically turns off after 10 minutes if no button is pressed. You can manually control the backlight:
- Press the "UP" button to turn the backlight on or off.
- Press any button to turn the backlight on if it's off.
Data Memory Function
The Watt Meter is equipped with a data memory function. All setting data and cumulative data (electricity quantity, cost, unit price) will be saved even when the device is removed from the socket or the appliance is unplugged. This allows you to view the last recorded data upon next use (current, voltage, power, and power factors are not saved).
Figure 4: Illustration of the Watt Meter's data memory function, showing data retention after power cycles.
Data Clear and Reset Function
To clear all cumulative data (electricity quantity, cost) and restore all settings to factory defaults:
- Press and hold the "M" button for 5 seconds directly. No additional reset tool is needed.
- To clear all cumulative data (kWh data and cost data), press and hold the "SET" button and "M" button at the same time for 3 seconds. This will not clear the set unit price.
Official Product Video Guide
Video 1: A comprehensive guideline for using the MECHEER Power Meter Plug, demonstrating its various functions and settings.
Maintenance
To ensure the longevity and accurate performance of your Watt Meter:
- Cleaning: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the Watt Meter in a cool, dry place away from direct sunlight and extreme temperatures.
- Material Quality: The entire body of the energy meter is constructed from high-quality ABS material, ensuring durability, fire resistance, and anti-drop properties.
Troubleshooting
Overload Protection
The Watt Meter includes an overload protection feature. If the connected appliance's power consumption exceeds the default overload threshold of 1800W, the entire display with backlight and the word "OVERLOAD" will flash to warn the user. For safety, immediately turn off the overloaded appliance.
Figure 5: The Watt Meter display showing an "OVERLOAD" warning when power consumption exceeds the set limit.
Specifications
| Feature | Value |
|---|---|
| Operating Voltage | 120 V/60 Hz |
| Power Display Range | 0.5W-1800W |
| Operation Current | Max 15A |
| Total Power Display | 0.0kWh-9999kWh |
| Total Cost Display | 0.0$-9999$ |
| Electrical Cost Setting Range | 00.00$/kWh-99.99 $/kWh |
| Voltage Accuracy | ±1% |
| Current Accuracy | ±2% |
| Power Accuracy | ±2% |
| Item Weight | 5.3 ounces |
| Product Dimensions | 5.5 x 3.5 x 2.5 inches |
| Model Number | PMP-N-1 |
| Color | Grey |
Figure 6: Detailed product dimensions and key specifications.
Warranty and Support
For warranty information or technical support, please refer to the manufacturer's official website or contact their customer service directly. Contact details are typically provided on the product packaging or the manufacturer's official online presence.
