1. Introduction
Thank you for choosing the Oxseryn EDHV02 Lightweight Cordless Handheld Pool Vacuum. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new pool cleaner. Designed for small above-ground swimming pools, hot tubs, and spas, this portable vacuum offers convenient cleaning without the need for hoses or cords.
2. Safety Information
Please read all safety instructions before operating the device.
- Underwater Operation Only: This vacuum is designed to operate exclusively underwater. Do not attempt to use it on dry surfaces.
- Water Level Sensor: The device is equipped with a water level sensor. If the product is not fully immersed in water for more than 60 seconds, the power will automatically shut down to prevent motor idling damage.
- Submersion Requirement: For proper suction, ensure both the water inlet and outlet of the product are submerged in water simultaneously.
- Charging: Always ensure the charging port is completely dry and sealed before charging. Do not charge the unit if it is wet.
3. Package Contents
Verify that all items are present in the package:
Figure 1: Included Components
- Scrub Body (Main Vacuum Unit)
- Filter Body
- Filter (Mesh Bag)
- Suction Head
- Triangle Head (with brushes)
- Telescopic Pole (Aluminum)
- Charger (USB cable and power adapter)
4. Specifications
| Feature | Specification |
|---|---|
| Item Weight | 2.65 Pounds (included telescoping pole) |
| Special Feature | Lightweight |
| Battery Capacity | 4000mAh Lithium Ion |
| Run Time | Approximately 45 minutes |
| Charging Time | Approximately 4.5 Hours |
| Control Method | Touch |
| Material | Aluminum |
| Product Dimensions | 34.45 x 5.91 x 3.35 inches |
5. Setup
Follow these steps to assemble your pool vacuum:
- Attach Suction Head: Securely attach your preferred suction head (either the standard suction head or the triangle head with brushes) to the main vacuum unit.
- Connect Telescopic Pole: Insert the aluminum telescopic pole into the designated slot on the main vacuum unit. Ensure it clicks into place. If you wish to use a longer standard pole, you can connect the vacuum cleaner to it using a universal pole connector (not included).
- Charge Battery: Before first use, fully charge the 4000mAh rechargeable battery. Connect the included USB cable and power adapter to the charging port on the vacuum unit. A full charge takes approximately 4.5 hours. Ensure the charging port is dry before connecting the charger.
Figure 2: Charging the Vacuum
6. Operating Instructions
To operate your Oxseryn pool vacuum, follow these steps:
- Submerge the Vacuum: Carefully lower the vacuum cleaner into the water. It is crucial that both the water inlet and outlet are fully submerged to activate the suction mechanism.
- Activate the Vacuum: Once fully submerged, turn on the vacuum. The new motor ensures stable suction for effective cleaning.
- Clean the Pool: Guide the vacuum along the bottom and sides of your pool, hot tub, or spa to collect debris. The lightweight design (2.65 lbs including pole) allows for easy maneuverability.
- Automatic Shut-off: The integrated water level sensor will automatically turn off the power if the unit is not fully immersed for more than 60 seconds, preventing motor idling damage.
- After Use: Once cleaning is complete, remove the vacuum from the water.
Figure 3: Vacuuming an Above-Ground Pool
Video 1: Oxseryn Stick Pool Vacuum for Above Ground Pool - Demonstrates the vacuum in action, showing its ease of use and effectiveness in an above-ground pool.
7. Maintenance
Regular maintenance ensures optimal performance and longevity of your pool vacuum.
- Cleaning the Filter: After each use, remove the filter body and clean the filter mesh bag. Twist off the bottom section, pinch the sides to release the filter, and hose off any collected debris.
- Charging: Recharge the 4000mAh battery as needed. A full charge provides approximately 45 minutes of run time. Do not overcharge the battery.
- Storage: Store the vacuum in a dry place when not in use.
8. Troubleshooting
If you encounter issues with your pool vacuum, refer to the following common problems and solutions:
- No Suction: Ensure both the water inlet and outlet are fully submerged in water. The vacuum requires full submersion to create suction.
- Vacuum Not Turning On: Check if the battery is charged. If the battery is low, recharge it for approximately 4.5 hours. Also, ensure the water level sensor is not activated (i.e., the unit is fully submerged).
- Reduced Suction: The filter may be full or clogged. Clean the filter mesh bag as described in the Maintenance section.
- Charger Light Flashing Red: This may indicate a charging issue or a battery fault. Ensure the charging port is dry and the charger is properly connected. If the issue persists, contact customer support.
9. Warranty & Support
The Oxseryn EDHV02 Lightweight Cordless Handheld Pool Vacuum comes with a limited warranty. For specific warranty details, claims, or technical support, please refer to the warranty card included in your package or contact Oxseryn customer service directly.