maXpeedingrods Traction Bar Kit Installation and User Manual

1. Introduction and Product Overview

The maXpeedingrods Traction Bar Kit is engineered to enhance the rigidity and stability of your vehicle's front suspension. Constructed from high-strength carbon steel with an anti-corrosion surface, this kit is designed for durability and precise fitment, contributing to improved handling and reduced wheel hop during aggressive driving conditions.

Image 1.1: The maXpeedingrods Traction Bar Kit, showcasing its durable material and anti-corrosion surface for long-lasting performance.

2. Product Components

The maXpeedingrods Traction Bar Kit includes all necessary components for installation. Please verify that all parts listed below are present and undamaged before beginning installation:

• Main Traction Bar Assembly
• Adjustable Radius Rods (2)
• Mounting Hardware (bolts, nuts, washers)
• Spherical Bearings/Bushings

Image 2.1: All components included in the maXpeedingrods Traction Bar Kit, laid out for inspection.

3. Vehicle Compatibility

This traction bar kit is specifically designed for the following vehicle models:

• For 1990-1993 Honda Acura Integra DA Chassis B-Series Engines or RHD
• For 1988-1991 Honda Civic B-Series Engines or RHD (for JDM & EDM)

Note: This kit will not work with stock USDM chassis. Professional installation is highly recommended due to specific fitment requirements.

Image 3.1: Detailed compatibility information for the traction bar kit, specifying vehicle makes, models, and years.

4. Installation Guide

Warning: Installation of this product requires specialized tools and automotive knowledge. Professional installation is highly recommended. Improper installation can lead to vehicle damage or personal injury.

4.1 Pre-Installation Steps

1. Ensure the vehicle is parked on a level surface and secured with jack stands.
2. Disconnect the battery's negative terminal.
3. Remove the front bumper and any underbody panels obstructing access to the front crossmember area.
4. Carefully remove the existing front crossmember or any components that will be replaced by the traction bar. Note: This kit is not compatible with stock USDM chassis components, which may require removal.

4.2 Traction Bar Installation

1. Position the main traction bar assembly into the designated mounting points on the vehicle's chassis.
2. Secure the main bar using the provided bolts and nuts. Do not fully tighten at this stage.
3. Attach the adjustable radius rods to the main traction bar and the lower control arms. Ensure the spherical bearings are properly seated.
4. Adjust the length of the radius rods to achieve the desired alignment settings. Consult a professional for optimal alignment specifications for your vehicle and driving style.
5. Once all components are in place and adjusted, progressively tighten all bolts to the manufacturer's recommended torque specifications.
6. Reinstall any removed bumper or underbody panels.
7. Reconnect the battery's negative terminal.

Image 4.1: An installed maXpeedingrods Traction Bar Kit, demonstrating its placement and connection points.

Image 4.2: A detailed view of a traction bar mounting point, illustrating the robust construction.

5. Operating Considerations

After installing the maXpeedingrods Traction Bar Kit, you may notice changes in your vehicle's handling characteristics. The primary benefits include:

• Improved Front End Stability: The traction bar reduces chassis flex, leading to a more predictable and stable front end, especially during cornering and acceleration.
• Reduced Wheel Hop: By controlling the movement of the lower control arms, the kit minimizes wheel hop, allowing for more efficient power transfer to the ground.
• Enhanced Steering Response: A stiffer front suspension can result in sharper and more direct steering feel.

It is recommended to perform a professional wheel alignment after installation to ensure optimal vehicle performance and tire wear.

6. Maintenance

Regular inspection and maintenance are crucial for the longevity and performance of your maXpeedingrods Traction Bar Kit:

• Periodic Inspection: Every 5,000 miles or during routine service, inspect all bolts, nuts, and bushings for tightness and wear. Re-torque fasteners to specifications if necessary.
• Cleanliness: Keep the traction bar and its components free from excessive dirt, salt, and debris, which can accelerate wear and corrosion.
• Bushings/Bearings: Monitor the condition of the spherical bearings or bushings. Replace them if you notice excessive play, cracking, or unusual noises.
• Corrosion: While the product has an anti-corrosion surface, inspect for any signs of rust or damage, especially in harsh weather conditions. Address any issues promptly to prevent further degradation.

7. Troubleshooting

If you experience any issues after installing the traction bar kit, consider the following:

• Unusual Noises (Clunking/Squeaking):
  • Check all mounting bolts for proper torque.
  • Inspect bushings/bearings for wear or damage.
  • Ensure no components are contacting other parts of the chassis or suspension.
• Poor Handling/Steering:
  • Verify that the radius rods are adjusted correctly and evenly.
  • Confirm that a professional wheel alignment has been performed after installation.
• Excessive Vibration:
  • Re-check all fasteners for proper torque.
  • Inspect for any loose or damaged components.

If issues persist, consult with a qualified automotive technician.

8. Specifications

9. Warranty and Support

maXpeedingrods products are manufactured to high standards and undergo rigorous quality control. For specific warranty information, including coverage details and duration, please refer to the warranty card included with your product or visit the official maXpeedingrods website.

For technical assistance, installation queries, or any other support needs, please contact maXpeedingrods customer service. Contact details can typically be found on the product packaging or the official brand website.