1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Audison SR 4.300.2 D-Class 4-Channel Amplifier. The SR 4.300.2 is a high-performance car audio amplifier designed with Audison D-Class Technology (ADT) to deliver powerful and clear sound in a compact form factor. Its extruded aluminum chassis and fanless convection cooling system ensure reliable operation even at high temperatures.
Key features include a 2Ω stable output stage, built-in Universal Speakers Simulator (USS), balanced high-noise rejection inputs (Speaker-In for OEM head units and RCA-In for aftermarket head units), and Automatic Remote Turn-On/Off (ART) functionality.
Image 1.1: Angled view of the Audison SR 4.300.2 D-Class 4-Channel Amplifier, showcasing its compact design and input/output connections.
2. Safety Information
Please read all safety instructions carefully before installing and operating the amplifier. Failure to do so may result in injury or damage to the product or vehicle.
- Always disconnect the vehicle's battery negative terminal before starting any electrical work.
- Ensure proper grounding of the amplifier to the vehicle chassis.
- Use appropriate gauge wiring for power, ground, and speaker connections as specified in the installation section.
- Avoid installing the amplifier in locations exposed to direct sunlight, excessive heat, moisture, or dust.
- Do not attempt to open or modify the amplifier. Refer all servicing to qualified personnel.
- Protect all wiring from sharp edges and moving parts.
3. Product Overview
The Audison SR 4.300.2 is a 4-channel amplifier designed for car audio systems. It features a robust D-Class architecture, providing high efficiency and power output in a compact footprint. The amplifier's design prioritizes thermal management through its extruded aluminum heatsinks, eliminating the need for internal cooling fans.
Key Features:
- ADC (Audison D-Class) Technology: 2Ω stable output stage for high audio performance in a compact size.
- Compact Design: Extruded aluminum chassis with fanless convection cooling.
- USS (Universal Speakers Simulator): Built-in for compatibility with various head units.
- Flexible Inputs: Balanced high-noise rejection Speaker-In (for OEM head units) and RCA-In (for aftermarket head units).
- ART (Automatic Remote Turn-On/Off): Automatically powers on/off with the OEM head unit when Speaker-In inputs are used.
- Pre-outs: Available even when using Speaker-In level inputs for system expansion.
Image 3.1: Rear panel of the Audison SR 4.300.2, illustrating the various input and output terminals.
4. Setup and Installation
Proper installation is crucial for optimal performance and safety. It is recommended that installation be performed by a qualified professional.
4.1 Mounting the Amplifier
Choose a mounting location that is dry, well-ventilated, and protected from direct heat and moisture. Ensure sufficient space around the amplifier for air circulation, especially around the heatsinks. Secure the amplifier firmly to a solid surface using appropriate hardware.
Image 4.1: Top view of the amplifier, showing the mounting points at each corner.
4.2 Wiring Connections
Refer to the diagram below and the amplifier's rear panel for connection points.
Image 4.2: Close-up of the rear panel connections, including power, ground, remote, speaker outputs, RCA inputs, and speaker-level inputs.
Power Connections:
- +12V: Connect to the positive terminal of the vehicle's battery via a fuse holder (30A fuse recommended, located within 18 inches of the battery).
- GND: Connect to a clean, unpainted metal point on the vehicle chassis. Ensure a solid, low-resistance connection.
- REM IN: Connect to the remote turn-on output of your head unit. If using Speaker-In inputs, the ART feature can eliminate the need for a separate remote wire.
Input Connections:
- RCA-In (INPUT A, INPUT B): For aftermarket head units with RCA pre-outs. Connect the left and right channels accordingly.
- Speaker-In (IN A, IN B): For OEM head units without RCA pre-outs. Connect directly to the speaker outputs of the factory head unit. The built-in USS ensures compatibility.
Speaker Output Connections:
Connect your speakers to the "SPK OUT" terminals. The amplifier supports 4-channel, 3-channel, or 2-channel (bridged) configurations. Ensure speaker impedance is within the amplifier's specifications (2Ω stable).
5. Operating Instructions
Once installed, configure the amplifier settings for optimal audio performance.
Image 5.1: Top panel of the amplifier, displaying the control switches and potentiometers for channels A and B.
5.1 Control Panel Overview
The amplifier features a control panel on its top surface for adjusting various audio parameters for channels A and B independently.
- ART (Automatic Remote Turn-On/Off): ON/OFF switch. Enable if using Speaker-In inputs and want the amplifier to turn on/off with the head unit.
- LEVELS (MIN/MAX): Input sensitivity adjustment. Match this to the output voltage of your head unit to prevent distortion.
- FILTER MODE (FULL/HI/LO): Selects the type of crossover filter.
- FULL: Full range output, no filter applied.
- HI: High-Pass Filter (HPF). Allows frequencies above the set point to pass.
- LO: Low-Pass Filter (LPF). Allows frequencies below the set point to pass.
- FILTER FREQ. (50Hz - 3200Hz): Adjusts the crossover frequency for the selected filter mode.
- BOOST (0dB/12dB): Bass boost control.
- MONO (IN L): Switch for bridging channels or summing inputs for mono output.
5.2 Initial Setup Steps
- Set all LEVEL controls to MIN.
- Set FILTER MODE to FULL for initial testing, or to HI/LO as appropriate for your speaker configuration (e.g., HI for full-range speakers, LO for subwoofers if bridging).
- Set FILTER FREQ. to a suitable starting point (e.g., 80Hz for HPF on full-range speakers).
- Set BOOST to 0dB.
- Turn on your head unit and play a familiar piece of music at a moderate volume.
- Slowly increase the LEVEL control on the amplifier until you hear distortion, then back off slightly.
- Fine-tune FILTER MODE, FILTER FREQ., and BOOST settings to achieve desired sound quality.
6. Maintenance
The Audison SR 4.300.2 amplifier is designed for durability and requires minimal maintenance. Follow these guidelines to ensure its longevity:
- Cleaning: Use a soft, dry cloth to wipe the exterior of the amplifier. Do not use harsh chemicals, solvents, or abrasive cleaners.
- Ventilation: Ensure that the heatsinks on the sides of the amplifier are not obstructed. Proper airflow is essential for the fanless convection cooling system.
- Connections: Periodically check all wiring connections to ensure they are secure and free from corrosion. Loose connections can lead to poor performance or damage.
- Environment: Avoid exposing the amplifier to extreme temperatures, high humidity, or direct water contact.
7. Troubleshooting
If you experience issues with your Audison SR 4.300.2 amplifier, consult the following troubleshooting guide before contacting support.
| Problem | Possible Cause | Solution |
|---|---|---|
| No Power / Amplifier does not turn on |
|
|
| No Sound Output |
|
|
| Distorted Sound |
|
|
| Amplifier Overheats |
|
|
8. Specifications
Detailed technical specifications for the Audison SR 4.300.2 D-Class 4-Channel Amplifier.
| Feature | Value |
|---|---|
| Model Number | SR4.300.2 |
| Power Supply Voltage / Fuse | 11 ÷ 15 VDC / 1 x 30A |
| Operating Power Supply Voltage | 6.5V ÷ 17 VDC |
| Idling Current | 1.6 A |
| Idling Current (when off) | 0.03 mA |
| Consumption @ 14.4 VDC, 2Ω, Max Musical Power | 25 A |
| Item Weight | 4.22 pounds (1.91 kg) |
| Product Dimensions (L x W x H) | 7.48 x 6.1 x 1.87 inches (190 x 155 x 47.5 mm) |
| Manufacturer | Audison |
Image 8.1: Dimensional drawing of the Audison SR 4.300.2 amplifier.
9. Warranty Information
The Audison SR 4.300.2 amplifier comes with a 1-Year Manufacturer Warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
For specific terms and conditions, or to initiate a warranty claim, please refer to the official Audison website or contact your authorized dealer.
10. Customer Support
For further assistance, technical support, or service inquiries regarding your Audison SR 4.300.2 amplifier, please contact:
- Your authorized Audison dealer where the product was purchased.
- The official Audison website for support resources, FAQs, and contact information: www.audison.eu
When contacting support, please have your amplifier's model number (SR4.300.2) and proof of purchase readily available.