1. Introduction
Thank you for choosing the Silvercrest SPWE 180 A2 Digital Bathroom Scale. This manual provides important information regarding the safe operation, setup, use, and maintenance of your new scale. Please read this manual thoroughly before first use and keep it for future reference.
2. Safety Information
Please observe the following safety precautions to ensure safe operation and to prevent damage to the device or injury to yourself.
- Do not use the scale on slippery surfaces. Ensure the scale is placed on a firm, flat, and stable surface.
- The glass surface can be slippery when wet. Always ensure the surface is dry before stepping on.
- Do not jump on the scale. Step on and off carefully.
- This scale is designed for personal use to measure body weight. Do not use it for commercial or medical purposes.
- Keep the scale away from extreme temperatures, direct sunlight, and high humidity.
- Do not attempt to disassemble or repair the scale yourself. Contact qualified service personnel if repairs are needed.
- Keep batteries out of reach of children.
3. Product Overview
The Silvercrest SPWE 180 A2 is a digital bathroom scale featuring a sleek design and precise weight measurement. It utilizes 4-sensor technology for accurate readings.
3.1 Key Features:
- 4-sensor technology for precise weight determination.
- Step-on function: measures weight directly upon stepping on the scale.
- Automatic shut-off.
- High stability with 6 mm safety glass surface.
- Easy-to-read LCD display.
- Overload and battery change indicator.
- Weight display in kg, lb, or st.
3.2 Components:
- Weighing Platform (Safety Glass)
- LCD Display
- Battery Compartment (underside)
- Unit Conversion Button (underside)
Figure 1: Front view of the Silvercrest SPWE 180 A2 Digital Bathroom Scale. The scale features a clear glass platform and an integrated LCD display at the top, showing a weight of 63.4 kg.
Figure 2: Angled view of the Silvercrest SPWE 180 A2 Digital Bathroom Scale, highlighting its 6mm safety glass surface and the stable base design. The LCD display is visible at the top.
4. Setup
4.1 Battery Installation
- Open the battery compartment cover located on the underside of the scale.
- Insert the required batteries (type not specified in product data, typically AAA or CR2032) according to the polarity markings (+/-).
- Close the battery compartment cover securely.
4.2 Initial Placement
Place the scale on a hard, flat, and stable surface. Avoid carpets or uneven flooring, as this can affect accuracy.
5. Operating Instructions
5.1 Taking a Measurement
- Ensure the scale is on a flat, stable surface.
- Gently step onto the scale with bare feet. The scale will automatically turn on due to the "Step-on" function.
- Stand still on the scale, distributing your weight evenly.
- Your weight will be displayed on the LCD screen.
- The scale will automatically turn off after a few seconds of inactivity.
5.2 Changing Weight Units (kg/lb/st)
The scale allows you to switch between kilograms (kg), pounds (lb), and stones (st).
- Locate the unit conversion button on the underside of the scale.
- Press the button to cycle through the available units (kg, lb, st).
- The selected unit will be displayed on the LCD screen during the next measurement.
6. Maintenance and Care
6.1 Cleaning
- Clean the scale with a slightly damp cloth and a mild detergent if necessary.
- Do not use abrasive cleaners or immerse the scale in water.
- Ensure the scale is completely dry before storage or next use.
6.2 Storage
Store the scale in a cool, dry place, away from direct sunlight and extreme temperatures.
6.3 Battery Replacement
When the battery indicator appears on the display, replace the batteries as described in the "Battery Installation" section (4.1). Dispose of old batteries responsibly according to local regulations.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| "Lo" or "Err" on display | Low battery or measurement error. | Replace batteries. If error persists, step off and on again. |
| "O-Ld" or "Err" on display | Overload. Weight exceeds maximum capacity. | Step off the scale. The maximum capacity is 180 kg (396 lb / 28 st). |
| Inaccurate readings | Scale on uneven surface, or moved recently. | Place scale on a hard, flat surface. If moved, allow it to calibrate by stepping on and off once before taking a measurement. |
| Scale does not turn on | Batteries incorrectly installed or depleted. | Check battery polarity. Replace batteries if necessary. |
8. Specifications
- Model: SPWE 180 A2
- Maximum Capacity: 180 kg (396 lb / 28 st)
- Division: 100 g / 0.2 lb
- Display: LCD
- Sensors: 4-sensor technology
- Material: Safety glass (6 mm), plastic, silicone
- Dimensions: Approx. 30 x 2.3 x 30 cm (L x H x W)
- Weight: Approx. 1.5 kg
- Special Features: Step-on function, Automatic shut-off, Overload indicator, Battery change indicator
9. Warranty and Support
Specific warranty information is not available in the provided product details. Please refer to the retailer or manufacturer's website for details regarding warranty terms and conditions. For technical support or service inquiries, please contact the customer service department of your retailer or the manufacturer.
