Acquaer XSP-050PM

Acquaer XSP-050PM 1/2HP Submersible Utility Pump Instruction Manual

Introduction

This manual provides essential information for the safe and efficient operation of your Acquaer XSP-050PM 1/2HP Submersible Utility Pump. Please read these instructions carefully before installation and use, and retain them for future reference.

The Acquaer XSP-050PM is a powerful 1/2 horsepower submersible utility pump designed for quick and efficient water removal. With a maximum flow rate of 2906 gallons per hour (GPH) and a maximum head of 26 feet, it is suitable for various applications including draining hot tubs, pools, basements, garden ponds, and general water transfer. Its durable thermoplastic casing and built-in thermal overload protector ensure reliable and safe operation.

Acquaer 1/2HP Submersible Utility Pump in a pool, actively pumping water, with specifications like 2906 GPH and 26 ft max head displayed.

Image: The Acquaer 1/2HP Submersible Utility Pump in operation, showcasing its water removal capabilities and key performance metrics.

Safety Information

WARNING: Failure to follow these safety instructions could result in electric shock, fire, serious injury, or death.

  • Always disconnect the pump from the power supply before handling, servicing, or performing any maintenance.
  • Do not operate the pump with a damaged cord or plug. If the cord is damaged, it must be replaced by the manufacturer or a qualified service agent to avoid hazards.
  • Ensure the power supply voltage matches the rating on the pump's label (115V).
  • This pump is designed for water only. Do not use it for flammable, explosive, or corrosive liquids.
  • Do not use the pump in salt water or brine.
  • Keep the pump fully immersed in water during operation to prevent dry running, which can cause overheating and damage.
  • Do not lift the pump by the power cable or discharge hose. Always use the carrying handle.
  • Protect the pump from freezing temperatures. Drain all water from the pump if there is a risk of freezing.
  • Ensure proper grounding. The pump is equipped with a grounding conductor and grounding-type attachment plug.
Caution warnings for sump pump use, showing not to lift by cable and to avoid dry running.

Image: Important safety warnings, including not lifting the pump by its power cable and avoiding dry running. The image also shows a minimum stop level of 1/5 inch.

Product Features

Detailed views of the Acquaer sump pump showing its large carrying handle, mechanically sealed housing, and lower base flare.

Image: Key design elements including the large carrying handle for easy transport, the mechanically sealed housing for durability, and the lower base flare for efficient drainage.

Labeled diagram of the Acquaer sump pump highlighting its portable handle, 19.7ft UL power cord, 3/4 inch NPT adapter, and 1-1/4 inch discharge.

Image: A detailed view of the pump's components, including the portable handle, 19.7ft UL power cord, 3/4 inch NPT adapter, and 1-1/4 inch discharge outlet.

  • High Performance: 1/2 HP motor delivers a maximum flow of 2906 GPH and a maximum head of 26 ft, capable of handling solids up to 1/5 inch.
  • Easy and Safe Operation: Simple plug-in operation with a low suction base that drains water down to 1/5 inch. Features a 19.7 ft UL certified power cord for safety and convenience.
  • Durable Construction: Built with reinforced engineering thermoplastic casing for resistance against corrosion and abrasion. Includes a quality mechanical seal to prevent leakage and a built-in thermal overload protector to prevent motor burnout.
  • Versatile Adapters: Comes with a 1-1/4'' NPT discharge, a 1-1/2'' elbow adapter, and a snap coupling adapter compatible with 3/4'', 1'', or 1-1/4'' hoses.

Package Contents

Verify that all items are present and in good condition:

  • Acquaer XSP-050PM 1/2HP Submersible Utility Pump
  • 3/4'' Garden Hose Adapter
  • 1-1/2'' Elbow Adapter
  • Snap Coupling Adapter (for 3/4'', 1'', or 1-1/4'' hoses)

Specifications

Feature Detail
Brand Acquaer
Model Number XSP-050PM
Power 1/2 HP
Voltage 115 Volts
Power Source AC
Maximum Flow Rate 2906 GPH (48.4 Gallons Per Minute)
Maximum Head 26 ft
Max. Particle Diameter 1/5 inch
Material Reinforced Engineering Thermoplastic
Product Dimensions (L x W x H) 15.2" x 9.4" x 7.4"
Power Cord Length 19.7 ft (UL certified)
Discharge Size 1-1/4'' NPT
Diagram showing the dimensions of the Acquaer sump pump and a table detailing flow rate (GPH) at various head heights.

Image: Detailed dimensions of the pump and a performance chart indicating gallons per hour (GPH) at different total feet of head, with a maximum head of 26 ft.

Setup

  1. Unpack the Pump: Carefully remove the pump and all accessories from the packaging. Inspect for any damage.
  2. Choose a Discharge Hose: Select an appropriate discharge hose for your application. The pump includes a 1-1/4'' NPT discharge, a 1-1/2'' elbow adapter, and a snap coupling adapter for 3/4'', 1'', or 1-1/4'' hoses. For optimal flow, use the largest diameter hose possible.
  3. Attach the Discharge Hose: Securely attach the chosen adapter to the pump's discharge outlet. Then, connect your discharge hose to the adapter. Ensure all connections are tight to prevent leaks.
  4. Position the Pump: Place the pump on a stable, level surface in the area to be drained. Ensure the pump is fully immersed in water before operation. The pump can drain water down to 1/5 inch from the surface.
  5. Power Connection: Ensure the power cord is free from damage. Plug the 19.7 ft UL power cord into a grounded 115V AC outlet.
Diagram illustrating various hose fitting options and adapters for the sump pump, including 3/4 inch, 1 inch, 1-1/4 inch, and 1-1/2 inch NPT connections.

Image: Multiple hose fitting options and adapters for connecting various hose sizes to the pump's discharge outlet.

Images showing the installation of a 3/4 inch garden hose adapter and a hose adapter coupling for different hose diameters.

Image: Visual guide for installing the 3/4 inch garden hose adapter and the multi-size hose adapter coupling.

Operating Instructions

  1. Submerge the Pump: Place the pump into the water to be drained. Ensure it is fully submerged and resting on a stable surface.
  2. Activate the Pump: Plug the power cord into a suitable grounded electrical outlet. The pump will begin operating immediately.
  3. Monitor Drainage: The pump will continue to operate, draining water down to approximately 1/5 inch from the surface.
  4. Deactivate the Pump: Once the desired water level is reached or the pump starts to run dry, unplug the power cord from the electrical outlet to stop operation.
  5. Remove the Pump: Carefully lift the pump by its carrying handle. Do not pull it out by the power cord.
Acquaer sump pump actively draining water from a pool, demonstrating its 'Plug and Play' ease of use.

Image: The Acquaer sump pump in operation, effectively draining water from a pool, highlighting its simple 'Plug and Play' functionality.

Close-up of the sump pump's lower suction base, showing its ability to drain water down to 1/5 inch from the surface.

Image: The pump's low suction base, designed to efficiently drain water down to a minimal level of 1/5 inch from the surface.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your pump.

  • Cleaning: After each use, especially when pumping dirty water, rinse the pump thoroughly with clean water. Remove any debris that may have accumulated around the intake screen or impeller.
  • Inspection: Periodically inspect the power cord and plug for any signs of damage, cuts, or fraying. Check the pump casing for cracks or damage.
  • Winterization: If the pump will be stored in an area subject to freezing temperatures, drain all water from the pump and hoses to prevent damage from ice expansion. Store in a dry, protected location.
  • Storage: Store the pump in a clean, dry place when not in use.

Troubleshooting

Problem Possible Cause Solution
Pump does not start or operate. No power supply.
Damaged power cord/plug.
Thermal overload protector tripped.		 Check power outlet and circuit breaker.
Inspect cord/plug; replace if damaged by a qualified technician.
Unplug pump, allow to cool for 30 minutes, then restart. Ensure pump is fully submerged.
Pump runs but no water is discharged or flow is low. Air lock.
Discharge hose kinked or blocked.
Intake screen or impeller clogged.
Pump not fully submerged.		 Slightly tilt the pump to release trapped air.
Check and clear any obstructions in the hose.
Disconnect power, clean intake screen and impeller.
Ensure pump is fully submerged in water.
Pump is excessively noisy. Debris in impeller.
Dry running.		 Disconnect power, clean impeller.
Ensure pump is fully submerged in water during operation.

Warranty and Support

The Acquaer XSP-050PM Submersible Utility Pump comes with a 2-year warranty from the date of purchase, covering defects in materials and workmanship. This warranty does not cover damage caused by misuse, neglect, improper installation, or unauthorized repairs.

For warranty claims, technical support, or any concerns regarding your product, please contact our Service Team. We are committed to providing assistance within 24 hours.

Contact Information:

  • Manufacturer: Acquaer
  • Website: www.acquaer.com
  • Service Team: Refer to your purchase documentation or the manufacturer's website for specific contact details.