WALL Seven Stand A2 High Type Rolling TV Stand User Manual

1. Product Overview

The WALL Seven Stand A2 High Type is a minimalist rolling TV stand designed for televisions ranging from 24 to 55 inches. It features a unique 7-shaped frame that creates a floating screen effect, concealed casters for smooth mobility, and adjustable height settings. Constructed from alloy steel, this stand offers durability and stability, having successfully passed in-house earthquake resistance testing.

This stand supports TVs up to 20 kg (44 lb) with VESA patterns of 100x100mm, 200x100mm, 200x200mm, 300x100mm, 300x200mm, and 300x300mm.

Image: The WALL Seven Stand A2 High Type in Satin White, showcasing its minimalist design with a television mounted.

2. Setup and Assembly

The WALL Seven Stand A2 High Type is designed for quick and easy assembly. All necessary parts and tools are included in the package. Follow the pictorial instructions provided in the manual for a smooth setup process.

2.1 Unpacking and Component Check

Carefully unpack all components and verify against the parts list in the included manual. Ensure all screws, washers, and tools are present.

Image: All components of the WALL Seven Stand A2 High Type, including the base, column, TV mounting bracket, and hardware, laid out for assembly.

2.2 Attaching the Column to the Base

1. Align the main column with the central hole in the base.
2. Secure the column to the base using the provided screws and the Allen wrench. Ensure a tight and stable connection.

2.3 Mounting the TV Bracket

1. Attach the vertical mounting rails to the back of your TV using the appropriate screws and spacers for your TV's VESA pattern. Refer to your TV's manual for correct screw lengths.
2. Hook the TV with the attached rails onto the main bracket of the stand.
3. Secure the TV to the stand using the safety screws or locking mechanism.

2.4 VESA Compatibility Check

Before mounting, verify your TV's VESA pattern, weight, and back design are compatible. The stand supports VESA patterns 100x100mm to 300x300mm and TVs weighing up to 44 lbs (20 kg).

Image: A diagram showing VESA mounting patterns, TV size range (24-55 inches), and maximum weight capacity (44 lbs) for the stand.

2.5 Assembly Video Guide

For a visual guide on assembly, please refer to the official assembly video:

3. Operating Instructions

3.1 Height Adjustment

The TV stand offers 5 levels of height adjustment, with each pitch being 5 cm (2 inches). To adjust the height, loosen the securing bolts on the main column, slide the TV bracket to the desired height, and then re-tighten the bolts securely. Ensure the TV is stable after adjustment.

3.2 Mobility

The stand features nine ultra-low, concealed casters on its base, allowing for smooth movement across various floor surfaces. To move the stand, gently push the base or the main column. Avoid pulling directly on the TV screen.

Image: A detailed view of the ultra-low profile, concealed casters integrated into the stand's base, enabling effortless movement.

3.3 Cable Management

Cables can be routed through the hollow main column of the stand to maintain a clean and organized appearance. Locate the cable entry and exit points on the column and feed your TV and accessory cables through them.

Image: Illustration demonstrating how power and signal cables can be neatly concealed within the stand's central column.

4. Maintenance

To ensure the longevity and appearance of your WALL Seven Stand A2 High Type, follow these maintenance guidelines:

• Cleaning: Wipe the stand with a soft, dry cloth. For stubborn marks, a slightly damp cloth with mild soap can be used, followed by drying thoroughly. Avoid abrasive cleaners or solvents.
• Caster Care: Periodically check the casters for any debris or hair that might impede smooth movement. Clean as necessary.
• Screw Tightness: Occasionally check all screws and bolts for tightness, especially after moving the stand or adjusting the height. Re-tighten if loose.

5. Troubleshooting

5.1 TV Not Fitting or Unstable

• Check VESA Pattern: Ensure your TV's VESA pattern matches the supported range (100x100mm to 300x300mm).
• Verify Weight: Confirm your TV's weight does not exceed 44 lbs (20 kg).
• Back Design: Some TV back designs with raised or convex parts, or screw holes located on raised sections, may not be compatible. Refer to the compatibility diagrams below.

Image: Examples of TV back designs that are not compatible with the WALL Seven Stand A2 High Type, typically due to raised areas or screw hole placement.

Image: Examples of TV back designs that are compatible with the WALL Seven Stand A2 High Type, showing flat surfaces or minimal raised areas around screw holes.

5.2 Difficulty Moving the Stand

• Carpet Use: The stand is not recommended for use on thick or long-pile carpets, as the casters may sink, making movement difficult and potentially causing instability.
• Caster Obstruction: Check for any obstructions (e.g., debris, small objects) around the casters.

5.3 Scratches on Floor

Depending on the floor surface material, caster marks or scratches may occur during movement. Exercise caution when moving the stand on delicate flooring. Consider using floor protection mats if concerned.

6. Specifications

Image: Detailed dimensional drawing of the WALL Seven Stand A2 High Type, including height, base diameter, and pipe diameter.

7. Warranty Information

The WALL Seven Stand A2 High Type comes with a 2-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

8. Customer Support

For any questions regarding product compatibility, assembly, operation, or warranty, please contact WALL customer support. You can find contact information on the official WALL website or through your retailer.

For additional information and accessories, visit the WALL Store on Amazon.