Yaheetech YT-00119348-001

Yaheetech Bar Stools Set of 2 Instruction Manual

Model: YT-00119348-001

1. Introduction

Thank you for choosing the Yaheetech Bar Stools. This manual provides essential information for the safe assembly, operation, and maintenance of your new bar stools. Please read these instructions carefully before use and retain them for future reference.

Two beige Yaheetech bar stools with armrests and chrome bases.

Figure 1: Yaheetech Bar Stools (Set of 2)

2. Safety Information

WARNING: This product can expose you to chemical Di(2-ethylhexyl)phthalate (DEHP) and Lead which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/furniture.

  • Ensure all parts are present and undamaged before assembly.
  • Do not stand on the chair.
  • Do not exceed the maximum weight recommendation of 331 pounds.
  • Keep children away from the product during assembly.
  • Periodically check all connections and tighten if necessary.

3. Product Features

  • Super Cozy: Comfortable foam pad with extra armrests and a footrest for relaxing seating.
  • Rolling & Adjustable: 360° swivel and adjustable height from 92 cm (36.5 inches) to 113 cm (44.5 inches) via a lever under the seat.
  • Gas Lift: Built with an SGS-Certified pneumatic cylinder for smooth and safe height adjustment.
  • Easy to Clean: Covered by waterproof PU leather for simple cleaning with a damp cloth.
  • Versatile: Suitable for various settings including dining rooms, kitchens, bars, and offices.
Detailed view of bar stool features including tufting, armrests, foam seat, PU leather, swivel, footrest, height adjustment lever, and large metal base.

Figure 2: Key features of the Yaheetech Bar Stools.

4. Package Contents

Before beginning assembly, ensure all components listed below are present and undamaged:

  1. Padded Seat with Backrest (x2)
  2. Armrests (x4)
  3. Footrest Column (x2)
  4. Gas Lift (x2)
  5. Sturdy Metal Base (x2)
  6. Screws and Allen Wrench (Hardware Pack)
  7. Instruction Manual (this document)

5. Setup and Assembly

Assembly is required. Please follow these steps carefully. An assembly instructions description is included in the package.

Step-by-Step Assembly:

  1. Attach Armrests to Seat: Secure the armrests to the underside of the seat using the provided screws. Ensure they are firmly attached.
  2. Connect Footrest Column: Attach the footrest column to the underside of the seat, aligning it with the pre-drilled holes.
  3. Insert Gas Lift: Remove the protective cap from the top of the gas lift. Insert the gas lift into the hole in the center of the metal base.
  4. Attach Seat to Gas Lift: Carefully place the assembled seat (with armrests and footrest column) onto the top of the gas lift. Press down firmly to secure.
Close-up view of the gas lift mechanism and footrest of a bar stool.

Figure 3: Detail of the gas lift and footrest assembly.

6. Operating Instructions

Height Adjustment:

To adjust the height of the bar stool, locate the lever positioned under the seat. Lift the lever while seated to lower the chair. To raise the chair, lift the lever while standing or with minimal weight on the seat.

Swivel Function:

The seat features a 360° swivel mechanism, allowing for easy rotation without moving the base of the stool.

7. Maintenance

Cleaning:

The bar stools are covered with waterproof PU leather. To clean, simply wipe with a damp cloth and mild cleansers. Avoid abrasive cleaners or harsh chemicals that may damage the material.

General Care:

  • Periodically check all screws and bolts to ensure they are tight.
  • Avoid prolonged exposure to direct sunlight or extreme temperatures to prevent material degradation.
  • Do not drag the stools across the floor; lift them when moving to prevent damage to the base or floor.

8. Troubleshooting

Chair not adjusting height:

Ensure the protective cap on the gas lift cylinder has been completely removed during assembly. If the cap is still present, the gas lift will not function correctly.

Chair feels wobbly:

Check all assembly screws and bolts, especially those connecting the seat to the footrest column and the base. Tighten any loose connections. Ensure the base is on a flat, even surface.

9. Specifications

AttributeValue
Product Dimensions19.5"D x 21"W x 36.5"H
ColorBeige
BrandYaheetech
SizeSet of 2
StyleModern
Furniture FinishChrome
Seat Height21.7 Inches (Adjustable 25-33 inches)
Seat Width17 Inches
Maximum Weight Recommendation331 Pounds
Product Care InstructionsWipe with Damp Cloth
Assembly RequiredYes
Number of Pieces2
Item Weight36.2 pounds
ManufacturerYaheetech
Item model numberYT-00119348-001
Frame MaterialMetal
Seat Material TypeFaux Leather

10. Warranty and Support

For warranty information or customer support, please refer to the documentation included with your product or contact Yaheetech directly through their official website. Keep your purchase receipt for warranty claims.

© 2023 Yaheetech. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.