PETLIBRO Cordless Cat Water Fountain User Manual

Introduction

The PETLIBRO Cordless Cat Water Fountain is designed to provide fresh, clean water for your pets, encouraging healthy hydration habits. Its innovative cordless design offers flexible placement options, while advanced filtration ensures water purity. This manual provides detailed instructions for setup, operation, and maintenance to help you get the most out of your fountain.

Image: The PETLIBRO Cordless Cat Water Fountain, showcasing its sleek white design and flowing water.

Components

Your PETLIBRO Cordless Cat Water Fountain package includes the following:

• 1x Rechargeable Battery Operated Cat Water Fountain
• 1x Wireless Pump
• 1x AC Power Adapter
• 1x Multi-layer Filter & Pump Sponge
• 1x Cleaning Brush

Setup

Follow these steps to set up your PETLIBRO Cordless Cat Water Fountain:

1. Soak the filter: Place the multi-layer filter in a clean bowl of water for 5 minutes to prepare it for use.
2. Assemble the pump: Insert the foam filter into the groove of the wireless water pump, and then install the silicone pipe onto the pump.
3. Fill the tank: Add water to the fountain's tank. Install the water tray and fasten the snap lids securely.
4. Install the filter: Place the soaked filter and its lid into the designated slot in the water tray.
5. Power on: Turn on the power switch located on the base for Induction Mode. Alternatively, connect the power supply to the base and turn on the power switch for Regular Mode.
6. Place the tank: Install the water tank onto the tank base by aligning the protruding hole of the water tank with the tank base.

Image: Visual guide for the first three steps of fountain assembly, including soaking the filter, assembling the pump, and filling the tank.

Image: Visual guide for the final three steps of fountain assembly, including filter installation, powering on, and placing the tank on the base.

Operating Modes

The PETLIBRO Cordless Cat Water Fountain offers two distinct operating modes:

• Radar Induction Mode: This mode activates the water flow for 42 seconds only when it senses your pet within 19.7 inches (50 cm). This conserves power and encourages your pet to drink. Additionally, a 42-second flow will occur every hour to ensure water availability.
• Continuous Flow Mode: When connected to a power supply, this mode provides a continuous 24/7 flow of fresh water, ensuring constant access for your pet.

Image: Illustration showing the two operating modes: Radar Induction Mode (left) and Continuous Flow Mode (right).

Image: Detailed comparison of Regular Flow Mode (continuous when plugged in) and Radar Induction Mode (motion-activated and hourly flow).

Image: Visual representation of the fountain's 30-day battery life, based on a single-cat household.

Image: A cat drinking from the fountain, highlighting the absence of external cables to prevent chewing hazards.

Image: Close-up of the fountain's base, showing the reinforced braided cable designed to prevent pets from biting through it.

Maintenance

Regular maintenance is crucial for the longevity and hygiene of your PETLIBRO water fountain. For your pet’s health and to prolong pump service life, it is recommended to change the water and clean the water tank, tray, foam filter, and pump at least once a week. Please replace the filter every 2 weeks.

• Easy Cleaning: The detachable water tank and wireless pump make cleaning every spot of the fountain simple and efficient.
• Filter Replacement: Ensure to replace the multi-layer filter every two weeks to maintain optimal water quality.
• Pump Cleaning: Wash the wireless pump every two weeks to ensure its power and water activation.

Image: The fountain disassembled, showing its detachable components for easy cleaning in a sink.

Image: Diagram illustrating the 4-layer filtration system, including ion exchange resin, activated carbon, non-woven fabric, and high-density sponge.

Image: Close-up of the stainless steel tray and safety snap lid, designed to prevent spills and pet acne.

Troubleshooting

The PETLIBRO water fountain is equipped with smart features to help prevent common issues:

• Water Shortage Detector: The pump automatically switches off if water levels drop below the minimum indication line, preventing overheating and pump damage. A red light will flash to indicate low water.
• Foreign Object Detection (FOD): If an unidentified metal object, such as a key, touches the tank base, the pump will automatically turn off to avoid potential hazards.

If you encounter other issues, please refer to the following:

• Fountain not dispensing water: Check if the water level is above the minimum line. Ensure the pump is clean and free of debris. Verify the power connection if using continuous mode, or that the battery is charged in induction mode.
• Unusual noise: This could indicate debris in the pump or low water levels. Clean the pump and ensure the water tank is adequately filled.

Image: Diagram showing the water shortage detector, which automatically turns off the pump when water levels are too low.

Image: Illustration of the Foreign Object Detection feature, which deactivates the pump if metal objects are detected on the base.

Image: Graphic illustrating the ultra-silent operation of the PETLIBRO Dockstream Fountain, with noise levels reduced to 23dB.

Specifications

Image: Diagram showing the dimensions of the PETLIBRO Cordless Cat Water Fountain: 9.2 inches long, 6.3 inches wide, and 6.5 inches high.

Official Product Video

Watch the official brand video for an overview of the PETLIBRO fountain's features and benefits:

Warranty and Support

The PETLIBRO Cordless Cat Water Fountain comes with a 24-month warranty. For any product inquiries, technical support, or warranty claims, please contact PETLIBRO customer service through their official website or the retailer where the product was purchased.

For additional resources and FAQs, visit the official PETLIBRO brand store: PETLIBRO Store