1. Important Safety Information
Read and understand all safety warnings and instructions before operating this product. Failure to follow these instructions may result in serious injury or property damage. Keep this manual for future reference.
- Always wear appropriate personal protective equipment (PPE), including eye protection, hearing protection, gloves, and sturdy footwear.
- Ensure the work area is clear of bystanders, children, and pets.
- Inspect the tool for any damage or loose parts before each use. Do not operate if damaged.
- Handle fuel with extreme care. Store fuel in approved containers in a well-ventilated area, away from ignition sources.
- Never operate the brush cutter in wet conditions or in the presence of flammable liquids or gases.
- Turn off the engine and disconnect the spark plug wire before performing any maintenance, cleaning, or when clearing blockages.
2. Product Overview
The SAKAWA BC600E is a powerful and versatile brush cutter featuring a 52.7cc 2-stroke engine with both electric and manual pull-start capabilities. It comes with a brush cutter head and a vibrating rake attachment for various gardening tasks.

Figure 2.1: SAKAWA BC600E Brush Cutter with included accessories, including the engine unit, shaft, handlebar, brush cutter head, vibrating rake, fuel mixing bottle, and tools.
Key Components:
- Engine Unit: 52.7cc, 2-stroke, 2.5 HP engine with Nicasil treatment for durability. Features an easy-start system with primer and pull-start.
- Electric Start System: Integrated lithium-ion battery for convenient electric starting. Includes a quick charger.
- Shaft: Professional accessory coupling system with 8mm solid steel transmission for robust attachment changes.
- Handlebar: Ergonomically designed for comfortable operation and control.
- Brush Cutter Head: Equipped with an adjustable protector and a double-layer self-lubricating head to reduce vibrations.
- Vibrating Rake Attachment: Features high-quality carbon rods and a longer transmission bar for extended reach, ideal for olive harvesting or similar tasks.

Figure 2.2: Close-up of the SAKAWA BC600E engine unit, showing the air filter cover and electric start module.

Figure 2.3: Electric start battery indicator, showing charge level for the lithium-ion battery.
3. Setup and Assembly
3.1 Unpacking and Inspection
Carefully remove all components from the packaging. Check for any shipping damage or missing parts. Refer to the packing list to ensure all items are present.
3.2 Handlebar Assembly
- Attach the handlebar to the main shaft using the provided clamps and bolts.
- Adjust the handlebar position for comfortable operation, then securely tighten all fasteners.

Figure 3.1: Detail of the handlebar mounting and adjustment.
3.3 Attaching the Shaft and Engine Unit
- Connect the engine unit to the main shaft, ensuring the professional coupling system is fully engaged and secured.
- Verify that all connections are tight and secure before proceeding.

Figure 3.2: Fully assembled SAKAWA BC600E brush cutter, ready for attachment installation.
3.4 Attaching Work Head (Brush Cutter or Vibrating Rake)
- Select the desired attachment (brush cutter head or vibrating rake).
- Align the attachment with the end of the shaft and secure it using the appropriate fasteners. Ensure the attachment is firmly seated and cannot rotate freely.
- For the brush cutter head, attach the adjustable protector, ensuring it is positioned correctly to deflect debris away from the operator.

Figure 3.3: Brush cutter head attachment with protective guard.

Figure 3.4: Vibrating rake attachment with carbon rods.
3.5 Fuel Preparation
This tool uses a 2-stroke engine and requires a specific fuel mixture. Mix unleaded gasoline with high-quality 2-stroke engine oil at the ratio specified in the engine manual (typically 25:1 or 50:1, refer to engine specifications for exact ratio). Use the provided mixing bottle for accuracy. Do not use pure gasoline or automotive oil.
3.6 Battery Charging
Before first use, fully charge the lithium-ion battery for the electric start. Connect the quick charger to the battery module and plug it into a suitable power outlet. The indicator light on the battery or charger will show charging status. Disconnect once fully charged.
4. Operating Instructions
4.1 Starting the Engine
Ensure the fuel tank is filled with the correct fuel mixture and the battery is charged.
- Place the brush cutter on a flat, stable surface.
- Set the ON/OFF switch to the 'ON' position.
- Engage the choke lever (if cold start).
- Press the primer bulb several times until fuel is visible in the return line.
- For Electric Start: Press and hold the electric start button. Release once the engine starts.
- For Manual Start: Pull the starter cord firmly and smoothly until the engine starts. Do not pull the cord to its full extension.
- Once the engine starts, gradually disengage the choke lever. Allow the engine to warm up for a few moments before operating.

Figure 4.1: Control switch detail, showing ON/OFF and electric start button.
4.2 Operating the Brush Cutter
- Hold the brush cutter firmly with both hands, maintaining a balanced stance.
- Keep the cutting attachment away from your body and legs.
- Operate at a consistent speed, allowing the engine to maintain optimal RPM (8500 rpm).
- Cut in a sweeping motion, moving from right to left to direct debris away from you.
- Avoid hitting hard objects like rocks or metal, as this can damage the blade or line.
4.3 Operating the Vibrating Rake
- Ensure the vibrating rake attachment is securely installed.
- Hold the tool comfortably, using the longer transmission bar to reach higher branches if necessary.
- Gently apply the vibrating rake to branches to dislodge fruits or nuts. Avoid excessive force that could damage the tree or the tool.
4.4 Stopping the Engine
To stop the engine, simply move the ON/OFF switch to the 'OFF' position. Allow the engine to cool down before storing.
5. Maintenance
Regular maintenance ensures the longevity and safe operation of your SAKAWA BC600E. Always turn off the engine and disconnect the spark plug wire before performing any maintenance.
5.1 Air Filter Cleaning
The high-capacity air filter should be inspected and cleaned regularly, especially after prolonged use in dusty conditions. Remove the air filter cover, take out the filter element, and clean it with warm soapy water or compressed air. Ensure it is completely dry before reinstallation.
5.2 Spark Plug Inspection
Inspect the spark plug for wear, carbon buildup, or damage. Clean or replace as necessary. Refer to the engine manual for the correct spark plug type and gap setting.
5.3 Fuel System Care
Drain the fuel tank if the tool will not be used for an extended period. Run the engine until it stops from lack of fuel to clear the carburetor. This prevents fuel degradation and carburetor clogging.
5.4 Attachment Lubrication
Regularly lubricate the gearbox of the brush cutter head and the moving parts of the vibrating rake attachment. Use appropriate grease or oil as recommended by the manufacturer.
5.5 General Cleaning and Storage
Clean the exterior of the tool after each use, removing any grass, dirt, or debris. Store the brush cutter in a dry, well-ventilated area, away from direct sunlight and extreme temperatures. Ensure the fuel tank is empty if storing for long periods.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Engine does not start | No fuel or incorrect fuel mixture Spark plug fouled or damaged Choke not engaged/disengaged correctly Battery low (for electric start) | Check fuel level and mixture Clean or replace spark plug Adjust choke lever Charge battery or use manual start |
| Loss of power during operation | Clogged air filter Incorrect fuel mixture Overheating | Clean air filter Verify fuel mixture ratio Allow engine to cool; check for obstructions |
| Excessive vibration | Damaged or unbalanced cutting attachment Loose fasteners | Inspect and replace damaged parts; ensure attachment is balanced Tighten all bolts and screws |
7. Specifications
- Model: SAKAWA BC600E
- Engine Type: 2-stroke
- Engine Displacement: 52.7 cm³
- Power Output: 2.5 HP (approx. 1.84 kW)
- Starting System: Electric Start (Lithium-ion battery) and Manual Pull Start
- Max. Engine Speed: 8500 rpm
- Weight: 14 kg
- Transmission: 8mm solid steel
- Attachments: Brush Cutter Head, Vibrating Rake
8. Warranty and Support
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. If you require technical assistance or spare parts, please contact SAKAWA customer support or your authorized service center. Keep your purchase receipt as proof of purchase.
ASIN: B0BQVZWKGM
First Available Date: May 18, 2022