1. Introduction
Thank you for purchasing the OUTON Arc LED Floor Lamp. This manual provides essential information for the safe and efficient use of your new lamp. Please read these instructions carefully before assembly and operation, and retain them for future reference.
2. Safety Information
- Ensure the power supply is disconnected before assembly, disassembly, or cleaning.
- This lamp is designed for indoor use only. Do not expose it to moisture or extreme temperatures.
- Use only bulbs of the specified type and wattage (E26 base, max 60W per bulb).
- Do not attempt to modify the lamp in any way. Unauthorized modifications may result in electric shock, fire, or injury.
- Keep the lamp away from flammable materials.
- Ensure the base is placed on a stable, level surface to prevent tipping.
- If the power cord is damaged, it must be replaced by the manufacturer or a qualified service agent to avoid hazards.
3. Package Contents
Please check that all components are present and undamaged:
- Arc Floor Lamp (main body) x 1
- Lampshade x 3
- 9W LED Bulb x 3
- Wrench (A&B) x 2
- User Manual x 1
Image: Comparison of OUTON Arc LED Floor Lamp features (replaceable bulbs, 360° rotatable arms, independent control, 3 LED bulbs included) versus a generic lamp.
4. Assembly Instructions
Assembly typically takes approximately 20 minutes. Follow these steps carefully:
- Install the Lampshades: Unfold each lampshade and secure it to its frame.
- Assemble the Lamp Pole: Connect all sections of the lamp pole by screwing them together clockwise until secure.
- Secure the Base: Place the base on a flat surface. Insert the bottom pole section into the base and tighten the screws using the provided wrenches (A&B) to ensure stability.
- Attach Arc Arms: Carefully attach each arc arm to the main pole. Ensure they are securely fastened.
- Install Bulbs: Unscrew the fixing ring from each lamp holder. Insert the provided 9W LED bulbs into the E26 sockets. Screw the fixing rings back to secure the lampshades.
Image: Visual guide for lamp assembly, showing steps for installing lampshades, connecting tubes, tightening base screws, attaching arc arms, and installing bulbs.
Assembly Video Guide
Video: Official OUTON US guide demonstrating how to install the 3 arc floor lamps, providing a visual aid for the assembly process.
5. Operating Instructions
The OUTON Arc LED Floor Lamp features independent control for each light and adjustable arms.
- Power On/Off: Plug the lamp into a standard electrical outlet. Use the rotary switch located on the lamp pole to turn the lamp on or off.
- Independent Light Control: The rotary switch allows you to activate one, two, or all three lights independently. Rotate the switch to cycle through the lighting options (e.g., 1 light on, 2 lights on, all 3 lights on).
- Adjusting Light Arms: Each arched arm can rotate 360 degrees. Gently adjust the position of the lampshades to direct light as desired for reading, ambient lighting, or task illumination.
Image: Demonstrates the 3-light independent control feature, showing how the rotary switch allows selection of one, two, or all three lights for different room settings.
Image: Illustrates the 360° rotatable light arms, highlighting the flexibility to position the light precisely.
6. Maintenance
- Cleaning: Disconnect the power before cleaning. Wipe the lamp base and pole with a soft, dry cloth. For lampshades, use a lint-free cloth or a soft brush to remove dust. Do not use abrasive cleaners or solvents.
- Bulb Replacement: Ensure the lamp is unplugged and the bulbs have cooled before attempting to replace them. Unscrew the old bulb and screw in a new E26 base LED bulb (max 60W).
- Inspection: Periodically check the power cord for any signs of damage. If damage is found, discontinue use and contact customer support.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on | No power supply; Bulb loose or faulty; Switch malfunction | Check power outlet; Ensure plug is fully inserted; Tighten or replace bulb; Contact customer support if switch is faulty. |
| Flickering light | Loose bulb; Incompatible bulb; Unstable power supply | Tighten bulb; Ensure bulb is E26 base and compatible; Check power source. |
| Lamp is unstable | Base not securely tightened; Uneven surface | Ensure base screws are fully tightened; Place lamp on a flat, stable surface. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | H-STDYD01 |
| Product Dimensions | 11"D x 11"W x 80"H (28cm D x 28cm W x 203cm H) |
| Lamp Type | Floor Lamp |
| Light Source Type | LED |
| Number of Light Sources | 3 |
| Wattage (per bulb) | 9 watts (Max 60W compatible) |
| Bulb Base | E26 |
| Color Temperature | 2700K (Warm Yellow Light) |
| Shade Material | Linen |
| Base Material | Metal |
| Switch Type | Rotary Switch |
| Indoor/Outdoor Usage | Indoor |
Image: Illustrates the E26 standard base, compatible with various bulb types (G25, ST58, A19, T45, RGB) up to 60W, and includes 3 LED bulbs.
Image: Details the reinforced metal base, highlighting its 9 lbs weight and dimensions (11 inch diameter, 1.5 inch height) for enhanced stability.
9. Warranty and Support
For warranty information or technical support, please contact OUTON customer service through the retailer's platform or visit the official OUTON website. Please have your model number (H-STDYD01) and purchase date available when contacting support.