Azwok R51K/BGE Remote Control User Manual

1. Introduction

This manual provides instructions for the Azwok R51K/BGE replacement remote control, designed for use with various Kelvinator air conditioner models. This remote offers the primary functions of your original remote control without requiring any programming.

1.1 Compatible Models

The Azwok R51K/BGE remote control is compatible with the following Kelvinator air conditioner models:

• R51K/BGCE
• R51E
• R51CE
• R51MCE
• R51DE
• R51MBGE
• R51I4BGE
• R51I4BGCE
• UL-R51ME
• R51I11BGE
• R51L4BGE
• R51CBGE
• R51CE
• R51ME
• R51MCE (B)

If your specific model is not listed, or if you are unsure about compatibility, please contact customer support for assistance.

2. Setup

2.1 Battery Installation

The remote control requires two (2) AAA batteries (not included) for operation. Follow these steps to install the batteries:

1. Locate the battery compartment cover on the back of the remote control.
2. Slide the cover downwards or press the latch and lift to open the compartment.
3. Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
4. Replace the battery compartment cover by sliding it back into place until it clicks securely.

Once batteries are installed, the remote control is ready for immediate use; no programming is required.

Figure 1: Battery compartment with two AAA battery slots.

3. Operating Instructions

This section details the functions of the buttons on your Azwok R51K/BGE remote control.

Figure 2: Front view of the remote control.

3.1 Button Functions

• ON/OFF (Red Button): Powers the air conditioner on or off.
• MODE: Cycles through operating modes: AUTO, COOL, DRY, HEAT.
• TEMP ▼ / ▲: Adjusts the set temperature downwards (▼) or upwards (▲).
• FAN SPEED: Cycles through fan speed settings: HIGH, MED, LOW.
• SWING: Activates or deactivates the automatic louver swing function.
• SLEEP: Activates the sleep mode for energy-efficient operation during sleep.
• TIMER ON: Sets a timer for the air conditioner to turn on automatically.
• TIMER OFF: Sets a timer for the air conditioner to turn off automatically.
• RESET: Resets certain settings or functions.
• LOCK: Locks the remote control buttons to prevent accidental changes.
• LED DISPLAY: Toggles the LED display on the air conditioner unit.
• TURBO: Activates maximum cooling or heating for rapid temperature change.
• AIR DIRECTION: Adjusts the direction of the airflow.

3.2 Operating Modes

• AUTO: The unit automatically selects the operating mode (Cool, Dry, Heat) based on the room temperature.
• COOL: Provides cooling to lower the room temperature.
• DRY: Reduces humidity in the room.
• HEAT: Provides heating to raise the room temperature.

4. Maintenance

To ensure the longevity and proper functioning of your remote control, follow these simple maintenance guidelines:

• Cleaning: Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Battery Replacement: Replace batteries when the remote's range decreases or if the display becomes dim. Always replace both batteries at the same time with new ones.
• Storage: If the remote control will not be used for an extended period, remove the batteries to prevent leakage and damage.
• Avoid Exposure: Keep the remote control away from direct sunlight, high temperatures, and moisture.

5. Troubleshooting

If you experience issues with your remote control, refer to the following common troubleshooting steps:

• Remote Not Responding:
  • Check if the batteries are inserted correctly with the correct polarity.
  • Replace old batteries with new AAA batteries.
  • Ensure there are no obstructions between the remote control and the air conditioner unit's receiver.
  • Make sure you are within the effective operating range of the air conditioner.
• Air Conditioner Not Responding to Specific Buttons:
  • Verify that the remote control's display shows the desired function.
  • Ensure the air conditioner unit is powered on and not in a locked state.

If the problem persists after trying these steps, please contact customer support.

6. Specifications

7. Warranty and Support

7.1 Warranty Information

This Azwok R51K/BGE remote control comes with a 12-month replacement warranty from the date of purchase. This warranty covers manufacturing defects and ensures that the remote control functions as intended for compatible models.

7.2 Customer Support

For any questions regarding compatibility, operation, or warranty claims, please contact Azwok customer support. Our team is available to assist you in choosing the correct remote and resolving any issues you may encounter.