1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your LEDVANCE SMART+ Wireless Indoor Doorbell Chime. Please read this manual thoroughly before using the device to ensure proper function and safety.
2. Product Overview
The LEDVANCE SMART+ Wireless Indoor Doorbell Chime is a battery-operated device designed to provide audible alerts when paired with a compatible doorbell button. It features multiple ringtones and adjustable volume settings for a customizable experience.
2.1. Package Contents
- 1 x LEDVANCE SMART+ Wireless Indoor Doorbell Chime (Model: 75828)
- 1 x User Manual
Note: 3 AA batteries are not included and must be purchased separately. The LEDVANCE SMART+ Outdoor Doorbell Camera (product: 75827) is sold separately.
2.2. Key Features
- Wireless operation, battery-powered (3 AA batteries, not included).
- 4 selectable ringtones.
- 4 adjustable volume settings (>80dB).
- Micro USB port for alternative power (cable not included).
- Easy pairing button.
- Ability to connect up to 8 compatible doorbell buttons.
- Status light indicator.
2.3. Product Diagram
Figure 2.3.1: Various views of the doorbell chime, showing the speaker grille, status lights, and control buttons on the side.
Figure 2.3.2: Angled view highlighting the three control buttons on the side of the chime: volume, ringtone, and pairing.
3. Setup
3.1. Powering the Chime
The chime can be powered by 3 AA batteries or via a Micro USB cable (not included).
- Battery Installation: Open the battery compartment on the back of the chime. Insert 3 AA batteries, ensuring correct polarity (+/-). Close the compartment securely.
- Micro USB Power: Alternatively, connect a Micro USB cable (not included) to the Micro USB port on the chime and plug the other end into a compatible USB power adapter (not included).
Figure 3.1.1: Illustration of the two power options: 3 AA batteries or a Micro USB connection.
3.2. Pairing with a Doorbell Button
To pair the chime with a compatible LEDVANCE SMART+ Outdoor Doorbell Camera (Model: 75827) or other compatible doorbell buttons:
- Ensure the chime is powered on.
- Press and hold the pairing button on the chime for approximately 3 seconds until the status light blinks rapidly.
- Within 10 seconds, press the button on your doorbell camera or compatible doorbell button.
- The chime will sound a short tone and the status light will stop blinking, indicating successful pairing.
You can pair up to 8 doorbell buttons with a single chime.
Figure 3.2.1: Visual representation of connecting multiple doorbell cameras to a single chime unit.
4. Operating the Chime
4.1. Adjusting Volume
The chime has 4 volume settings. Press the Volume button (top button on the side) repeatedly to cycle through the available volume levels. The chime will play a sample sound at each level.
Figure 4.1.1: The chime offers 4 distinct ringtones and 4 adjustable volume levels, providing customization for your home environment.
4.2. Changing Ringtones
The chime offers 4 different ringtones. Press the Ringtone button (middle button on the side) repeatedly to cycle through the available ringtones. The chime will play a sample of each ringtone.
5. Maintenance
- Cleaning: Wipe the chime with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: When the chime's performance degrades or the status light indicates low battery, replace all 3 AA batteries with new ones. Dispose of old batteries according to local regulations.
- Storage: If storing the chime for an extended period, remove the batteries to prevent leakage. Store in a cool, dry place.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Chime does not sound. | No power; Batteries are dead or incorrectly inserted; Chime not paired with doorbell button; Doorbell button out of range. | Check battery installation or Micro USB connection; Replace batteries; Re-pair the chime with the doorbell button; Move chime closer to the doorbell button. |
| Volume is too low or too high. | Volume setting needs adjustment. | Press the Volume button to cycle through volume levels. |
| Cannot change ringtone. | Ringtone button not pressed correctly. | Press the Ringtone button firmly to cycle through ringtones. |
| Chime randomly sounds. | Interference from other wireless devices; Faulty doorbell button. | Move chime away from other wireless devices; Test doorbell button, replace if faulty. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | 75828 |
| Power Source | 3 x AA Batteries (not included) or Micro USB (cable not included) |
| Dimensions (L x W x H) | 2.95 x 2.95 x 1.22 inches (7.5 x 7.5 x 3.1 cm) |
| Item Weight | 2.88 ounces (81.6 grams) |
| Ringtones | 4 selectable |
| Volume Settings | 4 levels (>80dB) |
| Material | Plastic |
| Color | White |
| Usage Environment | Indoor |
| Certifications | RoHS, FCC |
Figure 7.1.1: Dimensional drawing of the doorbell chime, indicating its compact size.
8. Warranty and Support
LEDVANCE offers a one-year satisfaction promise for this product. For warranty claims or technical support, please refer to the contact information provided on the product packaging or visit the official LEDVANCE website.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
