1. Introduction
Thank you for choosing the WOPET FT50 Automatic Pet Feeder. This device is designed to provide scheduled and portion-controlled meals for your cats and small to medium-sized dogs, ensuring a consistent and healthy diet. Please read this manual thoroughly before operating the feeder to ensure proper use and maintenance.
Image 1.1: The WOPET FT50 Automatic Pet Feeder, showcasing its design with dual stainless steel bowls and a visual representation of pets being fed.
2. Package Contents
Please verify that all items listed below are included in your package:
- 4L Automatic Pet Feeder Unit
- Stainless Steel Feeding Bowl
- Desiccant Bag
- Paper Liner Set
- USB-C Power Adapter and Cable
- User Manual (this document)
3. Product Overview
Familiarize yourself with the components of your WOPET FT50 Automatic Pet Feeder.
Image 3.1: The feeder with its top lid open, illustrating the internal food storage compartment. A small cat is visible in the foreground.
Key Components:
- Food Reservoir: Holds up to 4 liters (approximately 17 cups) of dry pet food.
- Control Panel/Display: For setting schedules, time, and recording voice messages.
- Food Outlet: Where dispensed food exits the feeder.
- Stainless Steel Bowl: Detachable for easy cleaning.
- Desiccant Compartment: Located under the lid to keep food fresh.
- Power Port: USB-C input for external power.
- Battery Compartment: For backup power (3 x D batteries, not included).
4. Setup Instructions
4.1 Power Supply
The WOPET FT50 feeder supports dual power modes: USB-C adapter and D-cell batteries.
- Primary Power (USB-C Adapter): Connect the provided USB-C power adapter to the feeder's power port and plug it into a wall outlet.
- Backup Power (Batteries): For uninterrupted operation during power outages, install three (3) D-cell batteries (not included) into the battery compartment located at the bottom of the feeder. Ensure correct polarity. The feeder retains settings even if power is lost and restored.
Image 4.1: Visual representation of the dual power supply system, highlighting the USB-C adapter connection and the battery compartment for D-cell batteries.
4.2 Filling the Food Reservoir
The feeder is designed for dry pet food with a diameter of 2-12mm (0.078-0.47 inches).
- Open the top lid of the feeder.
- Pour dry pet food into the reservoir. Do not overfill.
- Close the lid securely to maintain food freshness and prevent pets from accessing food prematurely.
Image 4.2: An internal view of the feeder's airtight food storage, designed to keep pet food fresh and secure.
4.3 Installing the Desiccant Bag
The desiccant bag helps keep the food fresh and dry.
- Locate the desiccant compartment under the top lid.
- Place the provided desiccant bag into the compartment.
- Replace the desiccant bag every 1-2 months for optimal freshness.
4.4 Assembling the Feeding Bowl
Attach the stainless steel bowl to the base of the feeder.
- Ensure the feeder is placed on a flat, stable surface.
- Align the stainless steel bowl with the food outlet and gently push it into place until secure.
5. Operating Instructions
The control panel allows you to customize feeding schedules and other settings.
5.1 Setting the Current Time
Refer to the feeder's display and buttons to set the current time. Typically, there are dedicated buttons for 'Set', 'Up', and 'Down' to adjust hours and minutes.
5.2 Programming Feeding Schedule
You can program up to 6 meals per day, with 1-8 portions per meal.
- Press the 'Meal' button (or equivalent) to enter meal programming mode.
- Use 'Up'/'Down' buttons to set the desired feeding time for Meal 1.
- Press 'Portion' button (or equivalent) and use 'Up'/'Down' to select the number of portions (1-8) for Meal 1.
- Repeat steps 2 and 3 for additional meals (up to 6).
- Confirm settings by pressing the 'Set' button (or equivalent) or waiting for the display to exit programming mode automatically.
Image 5.1: An example of a programmed feeding schedule, demonstrating how to set multiple meals and specific portion sizes throughout the day.
5.3 Recording a Voice Message
Record a 10-second voice message to call your pet at meal times.
- Press and hold the 'Record' button (often indicated by a microphone icon).
- Speak clearly into the microphone for up to 10 seconds.
- Release the 'Record' button to save the message. The message will play automatically during each scheduled feeding.
Image 5.2: A visual representation of the personalized meal call feature, showing a pet responding to a recorded voice message from the feeder.
5.4 Manual Feeding
To dispense a single portion immediately:
- Press the 'Manual Feed' button (often indicated by a food dispensing icon). One portion will be dispensed.
- Press again for additional portions.
6. Maintenance
6.1 Cleaning the Feeder
Regular cleaning ensures hygiene and proper operation.
- Unplug the feeder and remove any batteries.
- Remove the stainless steel feeding bowl for washing with mild soap and water. Rinse thoroughly and dry completely.
- Wipe the main unit, especially the food outlet and exterior, with a damp cloth. Do not immerse the main unit in water.
- Ensure all parts are completely dry before reassembling and powering on.
6.2 Using Disposable Paper Liners
The feeder includes disposable paper liners to absorb oil from pet food, simplifying bowl cleaning.
- Place a paper liner inside the stainless steel bowl before use.
- After use, dispose of the soiled paper liner and replace it with a new one.
Image 6.1: Comparison showing a bowl with residual oil before using a paper liner, and a clean bowl after the liner has absorbed the oil.
6.3 Desiccant Bag Replacement
Replace the desiccant bag every 1-2 months to maintain optimal food freshness.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Feeder not powering on | No power from adapter; batteries drained or incorrectly installed. | Check USB-C connection and wall outlet. Ensure batteries are fresh and correctly oriented. |
| Food not dispensing | Food jammed; low food level; incorrect schedule settings. | Check food reservoir for blockages. Refill food. Verify feeding schedule and portion settings. Ensure food size is within 2-12mm. |
| Voice message not playing | Message not recorded or corrupted. | Re-record the voice message. |
| Display not working | Power issue; unit malfunction. | Check power supply. If problem persists, contact customer support. |
8. Specifications
| Model | FT50 |
| Brand | WOPET |
| Capacity | 4 Liters (approx. 17 cups dry food) |
| Food Type | Dry pet food, 2-12mm (0.078-0.47 inches) diameter |
| Meals per Day | 1-6 meals |
| Portions per Meal | 1-8 portions |
| Voice Recording | 10 seconds |
| Power Source | USB-C Adapter (included) or 3 x D-cell Batteries (not included) |
| Material | Stainless Steel, Plastic |
| Dimensions | 20.29 x 20.19 x 34.49 cm |
| Weight | 1.57 kg |
| Target Species | Cats, Small/Medium Dogs |
9. Warranty and Support
9.1 Warranty Information
WOPET products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your product or visit the official WOPET website. Keep your purchase receipt as proof of purchase for warranty claims.
9.2 Customer Support
If you encounter any issues or have questions regarding your WOPET FT50 Automatic Pet Feeder that are not addressed in this manual, please contact WOPET customer support. Contact information can typically be found on the product packaging or the official WOPET website.
