Important Safety Information
Please read all safety instructions before assembly and use. Failure to follow these instructions may result in injury or damage to the product.
- Ensure the chair is used by one person at a time.
- Maximum weight capacity: 400 lbs. Do not exceed this limit.
- Exercise caution when adjusting the reclining positions to maintain stability.
- Keep small children and pets away during assembly.
- Periodically check all fasteners to ensure they remain tight.
Product Overview
The Aiho Convertible Sleeper Chair is a versatile 3-in-1 furniture piece designed for compact spaces. It easily transforms between a chair, a recliner, and a bed to suit various needs.
- Chair Mode: Ideal for reading or general seating.
- Recliner Mode: Provides a comfortable position for watching TV or lounging.
- Bed Mode: Offers a sleeping surface for guests.
Image: The Aiho Convertible Sleeper Chair demonstrating its three configurations: chair, recliner, and bed.
Package Contents
Before assembly, ensure all components are present:
- 1 x Convertible Sofa Chair
- 1 x Pillow
- Screws and Assembly Tools (if applicable, refer to specific instructions in the box)
- Instruction Manual (this document)
Setup and Assembly
The Aiho Convertible Sleeper Chair is designed for easy assembly, typically taking about 15 minutes. Follow the clear instructions provided in the packaging.
- Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface to prevent scratches.
- Attach Legs/Feet: Securely attach the plastic feet to the base of the chair. Ensure they are tightened properly.
- Assemble Main Frame: Follow the specific diagrams in your included instruction booklet to connect the main frame components using the provided screws.
- Insert Cushioning: Place the seat and back cushions into position.
- Add Pillow: Position the extra pillow for lumbar or neck support as desired.
Image: Visual guide demonstrating the conversion process from chair to bed, illustrating the pull-out mechanism.
Operating Instructions
Converting from Chair to Recliner/Bed
The Aiho Convertible Sleeper Chair features a convenient pull-out mechanism and an adjustable backrest for easy transformation.
- Adjusting the Backrest: The backrest can be set to three angles: 110°, 140°, and 180°. Gently push the backrest forward slightly, then recline it to your desired angle until it locks into place.
- Converting to Recliner: Locate the handy strap at the front of the seat. Pull the strap to extend the ottoman section. The ottoman moves on wheels for smooth operation. Adjust the backrest to 110° or 140° for a reclined position.
- Converting to Bed: To fully convert to a bed, pull the ottoman section out completely using the strap. Then, adjust the backrest to the 180° flat position. Ensure all sections are fully extended and flat for a stable sleeping surface.
Image: Illustration showing the 100°, 140°, and 180° adjustable backrest positions for sitting, lounging, and sleeping.
Maintenance and Care
Proper care will extend the life and appearance of your Aiho Convertible Sleeper Chair.
- Cleaning: Spot clean with a damp cloth. Use a mild detergent if necessary, testing on an inconspicuous area first. Avoid harsh chemicals.
- Pillow Care: The extra pillow comes with a removable cover for convenient cleaning. Follow the care instructions on the pillow label.
- Frame Inspection: Periodically check the steel frame and moving parts for any signs of wear or loosening. Tighten screws as needed.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fabric fading.
- Weight Distribution: Distribute weight evenly when using the chair or bed to prevent stress on the frame and cushions.
Image: A close-up view of the chair's fabric and cushion, highlighting the quality and texture of the material.
Troubleshooting
If you encounter any issues with your Aiho Convertible Sleeper Chair, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair feels unstable or wobbly. | Loose fasteners or uneven floor. | Ensure all screws and bolts are securely tightened. Place the chair on a level surface. |
| Difficulty converting between modes. | Mechanism obstruction or improper alignment. | Check for any objects obstructing the pull-out mechanism. Ensure the backrest is fully released before adjusting. Apply gentle, even force when pulling the strap. |
| Cushions feel too firm or uncomfortable. | New product firmness or personal preference. | Cushions may soften with use. Consider adding an extra throw pillow for personalized comfort. |
| Fabric appears damaged or ripped. | Manufacturing defect or transit damage. | Inspect upon arrival. If damaged, contact customer support immediately for assistance under warranty. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Aiho |
| Model Number | AR20-G-PLUS |
| Color | Light Gray |
| Type | Convertible Sleeper Chair (3-in-1) |
| Chair Dimensions (L x W x H) | 33.8" x 30.7" x 33.1" |
| Bed Dimensions (L x W x H) | 68.3" x 30.7" x 19.5" |
| Item Weight | 70.5 pounds |
| Weight Limit | 400 pounds |
| Adjustable Backrest Angles | 110°, 140°, 180° |
| Frame Material | Alloy Steel |
| Upholstery Fabric Type | Linen |
| Seat Fill Material | High-density Foam with Serpentine Springs |
| Product Care Instructions | Spot Clean with Damp Cloth |
Image: Detailed dimensions of the Aiho Convertible Sleeper Chair, illustrating its size in various configurations.
Warranty Information
Aiho provides a 12-month warranty for any quality problems with the sleeper chair from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use.
The warranty does not cover damage resulting from misuse, accidents, unauthorized modifications, or normal wear and tear.
Customer Support
If you have any questions, encounter problems, or are unsatisfied with your Aiho Convertible Sleeper Chair, please do not hesitate to contact our customer support team. We are committed to assisting you.
Please refer to the contact information provided in your product packaging or on the official Aiho website for the most current support details.
When contacting support, please have your model number (AR20-G-PLUS) and purchase date ready.