1. Introduction
The ENO Lounger DL Chair is a portable, folding outdoor chair designed for comfort and versatility. It offers a hammock-like seating experience, making it ideal for various outdoor activities such as camping, trekking, park leisure, and music festivals. Its lightweight design and easy assembly ensure convenient transport and setup. This model features a cup holder, cargo pockets, two-stage height adjustment, and an integrated pillow for optimal relaxation.
2. Safety Information
WARNING: This product supports a maximum weight of approximately 113 kg (250 lbs). Always follow correct assembly and usage instructions. When using outdoors, ensure the chair is placed on a stable, level surface to prevent tipping.
3. Package Contents
- Lounger DL Chair Fabric Seat (Tie Dye/Royal)
- Folding Aluminum Frame
- Travel-Ready Stuff Sack with Adjustable Shoulder Strap
Image: The ENO Lounger DL Chair shown both assembled and packed in its travel-ready stuff sack. The stuff sack is colorful with a black adjustable shoulder strap.
4. Setup Instructions
Follow these steps to assemble your ENO Lounger DL Chair:
- Unpack the Chair: Remove the chair frame and fabric seat from the stuff sack.
- Assemble the Frame: The aluminum frame is designed with elastic cords for easy assembly. Connect all pole sections until they are securely locked into place. Ensure all joints are fully engaged.
- Attach the Fabric Seat: Carefully attach the fabric seat to the assembled frame. Start by securing the top corners, then stretch the fabric to attach the bottom corners. Ensure the fabric is taut and evenly distributed.
- Adjust Leg Height (Optional): The chair features adjustable leg heights (approximately 3 inches and 10 inches). To adjust, press the button on each leg and slide the extension to the desired height. Ensure all four legs are set to the same height for stability.
Image: A close-up view of the chair's leg mechanism, illustrating the adjustable leg heights. The text indicates options for 10-inch and 3-inch heights.
Image: A detailed view of the chair's fabric seat, highlighting its hammock-inspired construction for enhanced comfort.
5. Operating Instructions
Once assembled, the ENO Lounger DL Chair is ready for use. Sit comfortably, allowing the hammock-inspired seat to cradle you. The chair is designed for relaxation and can be used in various settings.
- Integrated Pillow: The chair features a cushioned head pillow for added comfort.
- Cup Holder: Utilize the integrated cup holder on the armrest to keep your beverage secure and within reach.
- Cargo Pockets: Store small essentials like your phone, sunglasses, or a book in the dual stretch cargo pockets located on the side of the chair.
Image: A top-down view of the chair, emphasizing the cushioned head pillow and comfortable armrests.
Image: A close-up of the chair's side, showing the dual stretch cargo pockets and an integrated cup holder with a beverage can inside.
6. Maintenance
- Cleaning: For the fabric seat, spot clean with mild soap and water. Air dry thoroughly. Do not machine wash or tumble dry. For the frame, wipe with a damp cloth.
- Storage: When not in use, disassemble the chair and store it in its stuff sack in a cool, dry place away from direct sunlight to prolong its lifespan.
- Inspection: Periodically inspect the frame for any signs of damage or wear. Ensure all connections are secure before each use.
7. Troubleshooting
- Difficulty Assembling: Ensure all frame poles are fully extended and connected. The elastic cord guides the poles, but a firm push may be needed to fully seat them into their connectors.
- Chair Feels Unstable: Verify that all four legs are set to the same height and are firmly planted on a level surface. Check that the fabric seat is correctly attached to all four corners of the frame.
- Chair Disassembles When Moved: Ensure all frame connections are fully engaged. If the chair is lifted by the fabric, the frame connections might disengage. Always lift the chair by its frame when moving.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | LOUNGER SL |
| Color | Tie Dye / Royal |
| Material | 210D Ripstop Nylon, 6061 Aluminum Alloy Frame |
| Dimensions (Assembled) | Approx. 81 cm (Depth) × 58 cm (Width) × 76-94 cm (Height) |
| Dimensions (Packed) | Approx. 18 cm (Width) × 58 cm (Length) |
| Weight | Approx. 2.1 kg (4.6 lbs) |
| Weight Capacity | Approx. 113 kg (250 lbs) |
Image: The ENO Lounger DL Chair, showcasing its vibrant Tie Dye/Royal color scheme and overall design.
9. Warranty and Support
For warranty information or product support, please refer to the official ENO website or contact their customer service directly. Keep your purchase receipt as proof of purchase.
