GL.iNet GL-MT2500A
Contents
GL.iNet MT2500A (Brume 2) Mini VPN Security Gateway User Manual
Model: GL-MT2500A
Product Overview
The GL.iNet MT2500A (Brume 2) is a mini VPN security gateway designed for home office and remote work environments. It functions as both a VPN server and client, supporting VPN cascading for enhanced internet security and flexible network access. This device features a 2.5G WAN port, a 1G LAN port, and a USB 3.0 port, along with 8GB eMMC storage. Please note that this model does not include Wi-Fi functionality.

Image: The GL.iNet MT2500A (Brume 2) device, a compact grey square unit with ports visible on one side.
What's in the Box
- GL-MT2500A (Brume 2) with 2-year warranty
- Power Adapter (US Plug)
- Ethernet Cable
- User Manual
Key Features
- VPN Compatibility: Pre-installed with OpenVPN and WireGuard, compatible with over 30 VPN service providers. Offers OpenVPN speeds up to 150 Mbps and WireGuard speeds up to 355 Mbps.
- Network Protection: Supports Cloudflare encryption and IPv6 security protocol for enhanced privacy and security.
- VPN Cascading: Allows simultaneous operation of VPN server and VPN client, enabling secure access to local network servers while browsing the public internet via a VPN client.
- Remote Access Gateway: Ideal for hosting a VPN server at home or office, facilitating secure access to corporate private networks and bypassing geo-blocking for remote work.
- Advanced Hardware: Equipped with a 2.5 Gigabit WAN port, a 1 Gigabit LAN port, a USB 3.0 port, and 8 GByte eMMC storage for offline data.

Image: Visual representation of the Brume 2 device surrounded by icons for AdGuard, Cloudflare, OpenVPN, WireGuard, and IPv6, illustrating its security features.
Setup Guide
This section provides step-by-step instructions for setting up your GL.iNet MT2500A (Brume 2) VPN Security Gateway. For a visual guide, please refer to the official setup video below.
Video: An official unboxing and setup guide for the GL-MT2500A Brume 2 device, demonstrating the initial steps to get the device operational.
Initial Setup Steps:
- Connect to WAN: Use an Ethernet cable to connect your modem or an Ethernet wall socket to the GL-MT2500A's WAN port (labeled "2.5G WAN").

Image: A hand connecting an Ethernet cable from a wall socket to the WAN port of the Brume 2 device.
- Connect to LAN: Insert one end of another Ethernet cable into the GL-MT2500A's LAN port (labeled "LAN") and the other end to your computer.

Image: The Brume 2 device with both WAN and LAN Ethernet cables connected, ready for power-up.
- Power Up: Connect the power adapter to the Type-C Power port on the device and plug it into a power outlet. The LED light will turn white if the router successfully connects to the Internet.

Image: The Brume 2 device with all necessary cables (WAN, LAN, Power) connected, indicating readiness for operation.
- Access Admin Panel: Open a web browser on your connected computer and navigate to 192.168.8.1.
- Choose Language: Select your preferred language from the options presented on the setup page.
- Set Admin Password: Create and confirm a strong admin password for your device. This password will be required for future access to the admin panel.
Operating Instructions
VPN Client Configuration:
The Brume 2 supports various VPN client configurations. To enable a VPN client:
- Log into the admin panel (192.168.8.1).
- Navigate to the "VPN" section in the left-hand menu, then select "VPN Dashboard".
- Under the "VPN Client" section, locate your desired VPN protocol (e.g., OpenVPN, WireGuard) and click "Enable" or "Set Up Now" to configure.
- Follow the on-screen prompts to upload your VPN configuration file or enter the necessary details provided by your VPN service provider.
- Once enabled, the VPN LED light on the device will turn white, indicating a successful VPN client connection.

Image: A diagram illustrating VPN cascading, showing the Brume 2 device acting as both a WireGuard server and OpenVPN client, enabling data forwarding between different VPN networks.
AdGuard Home Integration:
The Brume 2 supports AdGuard Home for network-wide ad and tracker blocking. To configure AdGuard Home:
- Access the admin panel (192.168.8.1).
- Go to "Applications" and then "AdGuard Home".
- Enable AdGuard Home and configure its settings, such as blocklists and parental controls, as desired.

Image: A screenshot of the AdGuard Home interface within the GL.iNet admin panel, showing options for blocking ads, malware, and adult websites.
Maintenance
- Firmware Updates: Regularly check for and install firmware updates through the admin panel to ensure optimal performance, security, and access to new features.
- Physical Care: Keep the device in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Clean the exterior with a soft, dry cloth.
- Resetting the Device: If you encounter persistent issues, you can perform a factory reset using the reset button on the side of the device. Refer to the admin panel or the full user manual for specific reset procedures.
Troubleshooting
- No Internet Connection:
- Verify that the Ethernet cable is securely connected to the WAN port and your modem/wall socket.
- Check the LED indicator for the Internet connection status. If it's not white, there might be an issue with your ISP or modem.
- Restart the Brume 2 and your modem.
- Cannot Access Admin Panel:
- Ensure your computer is connected to the LAN port of the Brume 2.
- Confirm you are typing 192.168.8.1 correctly in your browser's address bar.
- Try clearing your browser's cache or using a different browser.
- VPN Client Not Connecting:
- Double-check your VPN configuration file or entered credentials for accuracy.
- Ensure your VPN service subscription is active.
- Consult your VPN service provider's support for specific connection issues.
Specifications
| Attribute | Value |
|---|---|
| Brand | GL.iNet |
| Model Name | Brume 2 |
| Item model number | GL-MT2500A |
| Package Dimensions | 6.77 x 4.69 x 2.09 inches |
| Item Weight | 5.5 ounces |
| Connectivity Technology | Ethernet |
| Special Feature | Internet Security, Parental Control |
| Frequency Band Class | Single-Band |
| Compatible Devices | Personal Computer |
| Recommended Uses For Product | Security |
| Color | Aluminium |
| Antenna Type | Internal |
| Manufacturer | GL.iNet |
| Date First Available | December 20, 2022 |
Warranty and Support
The GL.iNet MT2500A (Brume 2) comes with a 2-year warranty.
For detailed information, advanced configurations, and further support, please refer to the official User Manual PDF:
You can also visit the GL.iNet Store on Amazon for more products and support resources.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.