TriPole Car Fan 12V / 24V Portable Auto Cooling Fan Instruction Manual

1. Introduction

The TriPole Car Fan (Model DC201C) is a portable, dual-head auto cooling fan designed to enhance air circulation within various vehicles. It operates on a 12V or 24V power supply via a cigarette lighter plug, offering three adjustable speeds and rotatable fan heads for personalized comfort. This manual provides essential information for the safe and effective use of your new car fan.

2. Safety Information

• Ensure the fan is connected to a 12V or 24V cigarette lighter plug only. Using an unstable voltage source may cause damage to the fan.
• If the cigarette lighter plug becomes hot during use, immediately unplug it to allow it to cool down before resuming operation.
• Do not obstruct the fan blades or air vents during operation.
• Keep the fan away from water or excessive moisture.
• Ensure the fan is securely mounted to prevent it from falling during vehicle movement.
• Do not attempt to disassemble or repair the fan yourself. Contact customer support for assistance.

3. Product Overview

The TriPole Car Fan features two independently controlled fan heads, each with three-speed settings. The base is designed with a simulated leather surface and includes pre-installed 3M adhesive tapes for secure mounting. Each fan head can be manually rotated to direct airflow as needed.

Figure 1: TriPole Dual Head Car Fan with cigarette lighter plug.

Key Features:

• Dual Fan Heads: Provides airflow to both driver and passenger.
• Independent Control: Each fan head has its own power button and speed control.
• 3 Speed Settings: Adjust airflow intensity (2500RPM, 3300RPM, 3700RPM).
• Manual Rotation: Each fan head rotates 300° horizontally and 270° vertically.
• Wide Compatibility: Works with 12V/24V cigarette lighter sockets in various vehicles (SUV, sedan, truck, RV, etc.).
• Compact Design: Measures 3.5"D x 9.8"W x 6.4"H, minimizing visual obstruction.

Figure 2: Manual rotation capabilities of the fan heads.

Figure 3: Dimensions of the TriPole Car Fan.

4. Setup and Installation

1. Choose a Location: Select a flat, clean surface on your car dashboard or armrest area where the fan will not obstruct your view or interfere with driving.
2. Prepare the Surface: Ensure the chosen surface is clean and dry for optimal adhesion.
3. Attach the Fan: The fan base has pre-installed 3M adhesive tapes. Peel off the protective paper from the tapes.
4. Secure Placement: Firmly press the fan onto the desired location on your dashboard or armrest. Apply pressure for a few seconds to ensure strong adhesion.
5. Connect Power: Insert the cigarette lighter plug into your vehicle's 12V or 24V cigarette lighter socket.

Figure 4: Illustration of the 3M adhesive tape for easy installation.

5. Operating Instructions

1. Power On/Off: Each fan head has an independent power button located on the base. Press the button once to turn on the fan at the lowest speed.
2. Adjust Speed: Press the power button repeatedly to cycle through the three speed settings (Low, Medium, High). Pressing it a fourth time will turn the fan off.
3. Direct Airflow: Manually rotate each fan head 300 degrees horizontally and 270 degrees vertically to direct the airflow to your preferred area.

Figure 5: Visual representation of the three-speed settings and their RPMs.

6. Maintenance

• Cleaning: The fan features a removable cover for easy cleaning of the blades. Gently remove the cover and wipe the blades with a soft, dry cloth. Ensure the fan is unplugged before cleaning.
• Storage: When not in use for extended periods, unplug the fan and store it in a cool, dry place.

7. Troubleshooting

• Fan Not Turning On:
  • Check if the cigarette lighter plug is securely inserted into the socket.
  • Verify that your vehicle's 12V/24V power outlet is functioning.
  • Ensure the power button for the specific fan head is pressed.
• Adhesive Not Holding:
  • Ensure the mounting surface was clean and dry before application.
  • For stronger adhesion, consider using additional automotive-grade double-sided tape if the original tape fails.
• Plug Overheating:
  • Immediately unplug the fan. Allow the plug to cool down completely before attempting to use it again. If the issue persists, discontinue use and contact customer support.

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact TriPole customer service directly. Keep your purchase receipt for warranty claims.