1. Product Overview
The Waring Commercial CTS1000 is a heavy-duty conveyor toaster engineered for efficiency and durability in commercial food service environments. This unit is capable of toasting up to 450 slices per hour, accommodating various bread types and bagels up to 2 inches thick. Its design prioritizes consistent performance and ease of use for busy operations.
Image 1.1: The Waring Commercial CTS1000 Conveyor Toaster, showcasing its stainless steel construction and continuous feed rack.
Key Features:
- Heavy-duty, brushed stainless steel construction: Ensures durability and easy cleaning.
- POWER ON and READY indicator lights: Provides clear operational status at a glance.
- Cool-touch side panels: Enhances safety during operation.
- UL, NSF certified: Meets recognized standards for safety and sanitation.
Image 1.2: Close-up view highlighting key features such as cool-touch side panels, thermo-insulated carrying handles, and heavy-duty brushed stainless steel construction.
2. Setup and Installation
Proper setup is essential for safe and efficient operation of your conveyor toaster.
2.1 Unpacking
- Carefully remove the toaster from its packaging.
- Inspect the unit for any shipping damage. If damage is found, contact your supplier immediately.
- Remove all packing materials, including any protective films or ties.
2.2 Placement
- Place the toaster on a stable, level, heat-resistant surface.
- Ensure adequate clearance around the unit for ventilation (minimum 4 inches on all sides).
- Do not place the toaster near flammable materials or heat sources.
2.3 Electrical Connection
- This unit operates on 120 Volts and requires 1800 Watts of power.
- It is equipped with a standard 5-15 Phase Plug.
- Connect the toaster only to a grounded electrical outlet with the correct voltage and amperage. Consult a qualified electrician if you are unsure about your electrical supply.
Image 2.1: Product dimensions for placement consideration: Width 15.5", Height 13.5", Depth 19.5".
3. Operating Instructions
Follow these steps for optimal toasting performance.
3.1 Initial Use
- Before first use, operate the toaster empty for approximately 5 minutes on a medium setting to burn off any manufacturing residues. A slight odor or smoke is normal during this initial process. Ensure good ventilation.
3.2 Controls Overview
Image 3.1: Close-up of the control panel, showing the Power On/Ready lights, Conveyor Speed dial, and Power Saver switch.
- POWER ON Light (Red): Illuminates when the unit is powered on.
- READY/HOT Light (Green): Illuminates when the toaster has reached operating temperature.
- Conveyor Speed Dial: Adjusts the speed of the conveyor belt, influencing the toast darkness. Higher numbers typically mean slower speed and darker toast.
- Power Saver Switch (ON/OFF/STANDBY):
- ON: Full power operation.
- STANDBY: Reduces power consumption during idle periods while keeping the unit warm for quick recovery.
- OFF: Turns the unit off.
3.3 Toasting Process
- Ensure the toaster is plugged in and the Power Saver switch is set to ON.
- Wait for the READY/HOT light to illuminate, indicating the toaster has reached its optimal temperature.
- Adjust the Conveyor Speed Dial to your desired toast darkness. Experimentation may be required to find the ideal setting for different bread types.
- Place bread, bagels, or other items onto the continuous feed rack at the top opening. The conveyor will automatically pull the items through the heating elements.
- Toasted items will exit the bottom front of the toaster onto the toast drawer.
Image 3.2: The continuous feed rack for loading items and the toast drawer for collecting finished products.
3.4 Video Demonstration
The following video demonstrates the operation of the Waring Commercial CTS1000 Conveyor Toaster, including loading and retrieving toasted items.
Video 3.1: Demonstration of the Waring CTS1000 Conveyor Toaster in use, showing bread being toasted and collected. (Note: Actual video URL not provided in source data; placeholder used.)
Video 3.2: Detailed look at the control panel and the toasting process, highlighting the adjustable conveyor speed and heat settings. (Note: Actual video URL not provided in source data; placeholder used.)
4. Maintenance and Cleaning
Regular maintenance ensures longevity and optimal performance of your toaster.
4.1 Daily Cleaning
- Always unplug the toaster and allow it to cool completely before cleaning.
- Remove the toast drawer (crumb tray) from the bottom front of the unit. Empty crumbs and wipe the tray clean with a damp cloth.
- Wipe down the exterior of the toaster with a damp cloth and mild detergent. Do not use abrasive cleaners or scouring pads, as these can damage the stainless steel finish.
- Do not immerse the toaster in water or spray water directly onto the unit.
4.2 Periodic Maintenance
- Periodically inspect the conveyor belt for any debris or buildup. If necessary, gently clean with a soft brush (ensure unit is unplugged and cool).
- Check the power cord for any signs of damage. If damaged, it must be replaced by a qualified service technician.
5. Troubleshooting
Refer to this section for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Toaster does not turn on. | No power supply; Power Saver switch is OFF. | Ensure the unit is properly plugged into a live outlet. Set the Power Saver switch to ON. Check circuit breaker. |
| Toast is too light or too dark. | Incorrect Conveyor Speed setting. | Adjust the Conveyor Speed dial. For darker toast, select a slower speed (higher number). For lighter toast, select a faster speed (lower number). |
| Uneven toasting. | Heating elements may be partially obstructed or dirty; improper loading. | Ensure the toaster is clean and free of debris. Load items evenly on the conveyor rack. If problem persists, contact service. |
| Toaster is overheating. | Insufficient ventilation. | Ensure adequate clearance around the unit (minimum 4 inches on all sides) for proper airflow. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact Waring Commercial customer support.
6. Specifications
Detailed technical specifications for the Waring Commercial CTS1000 Conveyor Toaster.
- Brand: Waring
- Model Number: CTS1000
- Material: Stainless Steel
- Color: Silver
- Product Dimensions (DxWxH): 19"D x 16"W x 16.5"H
- Item Weight: 27.9 Pounds
- Wattage: 1800 watts
- Voltage: 120 Volts
- Plug Style: 5-15 Phase Plug
- Slices per Hour: Up to 450
- Max Bread Thickness: 2 inches
- Special Features: Anti-Slip Base, Cool Touch Exterior, High Lift Carriage, Rust Proof, Self Centering Rack, Variable Browning Control, Warming Rack
- Certifications: UL, NSF
- UPC: 749628427867, 040072007200, 095787643120
7. Warranty and Support
For warranty information, technical support, or service inquiries, please contact Waring Commercial directly or refer to the official Waring website. Keep your purchase receipt for warranty claims.
Visit the official Waring Store for additional product information and support: Waring Commercial Store
