Zunate NLQ4-125 4P

Download PDF
Contents

Zunate NLQ4-125 4P Automatic Dual Power Transfer Switch User Manual

Model: NLQ4-125 4P | Brand: Zunate

1. Introduction

This manual provides essential information for the safe and efficient operation of the Zunate NLQ4-125 4P Automatic Dual Power Transfer Switch (ATS). Please read these instructions carefully before installation, operation, or maintenance to ensure proper function and prevent potential hazards. Keep this manual for future reference.

Safety Precautions

  • Installation and maintenance should only be performed by qualified electricians.
  • Ensure all power sources are disconnected before performing any work on the switch.
  • Always follow local electrical codes and regulations.
  • Do not operate the switch if it appears damaged.

2. Product Overview

The Zunate NLQ4-125 4P Automatic Dual Power Transfer Switch is designed to automatically switch between two power sources (e.g., utility power and a generator) to ensure continuous power supply. It features reliable transmission, excellent insulation, and a compact structure for various industrial and commercial applications.

Front view of the Zunate NLQ4-125 4P Automatic Dual Power Transfer Switch

Figure 2.1: Front view of the NLQ4-125 4P ATS, showing the manual/auto selector and power indicators.

Key Features

  • Automatic and Manual Operation: The switch can be operated automatically or manually, providing flexibility in power management.
  • Millisecond Switching: Ensures seamless power transfer without interruption during power failures or recoveries.
  • Durable Construction: Made from excellent flame-retardant PC material with high-temperature resistance and anti-aging properties. Utilizes silver contacts for good conductivity.
  • Reliable Transmission: Designed for stable and secure power switching.
  • Easy Installation and Maintenance: Compact structure facilitates straightforward setup and upkeep.
Zunate NLQ4-125 4P ATS with text highlighting automatic/manual operation and millisecond switching

Figure 2.2: The ATS highlighting its automatic/manual operation and millisecond switching capability.

3. Specifications

SpecificationValue
ModelNLQ4 125 4P
MaterialPC, Silver
Rated Frequency50Hz / 60Hz
Insulation VoltageAC690V 50Hz
Rated VoltageAC400V 50Hz
GradePC Grade
Poles4P
Electrical Life2000 times
Mechanical Life5000 times
Rated Short-Circuit Current50kA
FuseRT16 00 63A
Rated Impulse Withstand Voltage8kV
Control Circuit Rated Control Voltage (Us)AC220V (85% Us - 110% Us)
Auxiliary CircuitTwo relays, each with two sets of AC220V 50Hz 5A capacity
Operation ModeAutomatic, Manual
Switch StyleToggle
Connector TypeScrew Terminals
Product Dimensions142mm x 76mm x 105mm (approx. 5.59in x 2.99in x 4.13in)
Zunate NLQ4-125 4P ATS with dimensions labeled

Figure 3.1: Dimensions of the NLQ4-125 4P Automatic Dual Power Transfer Switch.

4. Setup and Installation

Proper installation is crucial for the safe and reliable operation of the ATS. It is highly recommended that installation be performed by a certified electrician.

Installation Steps

  1. Mounting: Securely mount the ATS in a suitable electrical enclosure, ensuring adequate ventilation and clearance for wiring. The device is designed for panel mounting.
  2. Wiring Connections: Connect the main power source (Source A) and the backup power source (Source B) to their respective terminals on the ATS. Connect the load to the output terminals. Refer to the wiring diagram provided with the product for precise connections.
  3. Control Circuit Wiring: Connect the control circuit as per the diagram. The control voltage is AC220V.
  4. Grounding: Ensure the ATS is properly grounded according to local electrical codes.
  5. Inspection: After wiring, visually inspect all connections to ensure they are tight and correct.
Zunate NLQ4-125 4P ATS connected to an electrical panel with wiring

Figure 4.1: Example of the ATS installed within an electrical system, showing wiring connections.

Zunate NLQ4-125 4P ATS mounted in an industrial control cabinet

Figure 4.2: The ATS integrated into a larger electrical control panel, demonstrating typical installation environment.

5. Operating Instructions

The NLQ4-125 4P ATS offers both automatic and manual operation modes.

Mode Selection

  • Automatic Mode (Auto): In this mode, the switch automatically detects the status of both power sources. If the normal power (Source A) fails, the switch will automatically transfer the load to the backup power (Source B). When normal power is restored, the switch will automatically transfer the load back to Source A.
  • Manual Mode (Manual): In manual mode, the power transfer is controlled by the user. Use the toggle switch on the front panel to select between Source A and Source B. Ensure the switch is in the 'Manual' position before attempting manual operation.
Close-up of the Zunate NLQ4-125 4P ATS selector switch and indicators

Figure 5.1: Detail of the manual/auto selector switch and power source indicators on the ATS.

Operation Process

When operating in automatic mode:

  1. The ATS continuously monitors the normal power supply (Source A).
  2. If Source A becomes abnormal or fails, the ATS will detect this condition.
  3. Within milliseconds, the ATS will transfer the load from Source A to the backup power supply (Source B).
  4. Once Source A is restored and stable, the ATS will automatically transfer the load back to Source A.

This process ensures continuity, reliability, and safety of the power supply, achieving an uninterrupted power effect.

Collage of various application scenarios for the Zunate NLQ4-125 4P ATS, including factories, shopping malls, and solar installations

Figure 5.2: The ATS is suitable for various applications where continuous power is critical, such as factories, shopping malls, and facilities with solar power integration.

6. Maintenance

Regular maintenance helps ensure the longevity and reliable performance of your ATS.

  • Visual Inspection: Periodically inspect the switch for any signs of physical damage, loose connections, or overheating.
  • Cleaning: Keep the switch clean and free from dust and debris. Use a dry, soft cloth for cleaning. Do not use liquid cleaners.
  • Terminal Tightness: Check and tighten all terminal connections annually to prevent arcing and ensure good conductivity.
  • Functional Test: Periodically test the automatic transfer function by simulating a power failure (if safe to do so and with proper precautions) to ensure it operates correctly.

7. Troubleshooting

If you encounter issues with your ATS, refer to the following common problems and solutions:

ProblemPossible CauseSolution
No power transfer in Auto modeControl circuit fault, power source not detected, switch in Manual modeCheck control circuit wiring. Verify both power sources are active. Ensure selector is in 'Auto' position.
Switch does not return to normal powerNormal power not fully restored or stableVerify normal power source is stable and within specifications.
Overheating or unusual noiseLoose connections, overloaded circuit, internal faultImmediately disconnect power. Check all connections. Reduce load if overloaded. Contact qualified personnel for inspection.
Indicators not lighting upNo power to the ATS, faulty indicator lightCheck incoming power supply. If power is present, the indicator may be faulty.

For issues not listed above or if troubleshooting steps do not resolve the problem, contact a qualified electrician or Zunate customer support.

8. Environmental Conditions

To ensure optimal performance and longevity of the ATS, adhere to the following environmental guidelines:

  • Temperature: The maximum ambient temperature should not exceed 40℃ (104°F). The minimum temperature should not be below -5℃ (23°F). The average temperature over a 24-hour period should not exceed 35℃ (95°F).
  • Altitude: The installation site altitude should not exceed 2000 meters (6562 feet).
  • Humidity: When the maximum temperature is 40℃, the relative humidity of the installation site should not exceed 50%. At lower temperatures, higher relative humidity is permissible (e.g., 90% relative humidity at 25℃). Special measures should be taken to address occasional condensation on the product surface due to temperature changes.

9. Package Contents

Upon opening the package, verify that all items are present and undamaged:

  • 1 x Automatic Dual Power Transfer Switch (NLQ4-125 4P)
  • 1 x Instruction Manual
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.