XP METAL DETECTORS DEUS2-22FMFRCEA

XP Deus II RC Metal Detector - 22 FMF Coil (9") User Manual

Model: DEUS2-22FMFRCEA

Introduction

This manual provides essential instructions for the setup, operation, and maintenance of your XP Deus II RC Metal Detector with the 22 FMF (9-inch) coil. The XP Deus II is a fully wireless, multi-frequency metal detector designed for versatile use across various terrains, including land, beach, and underwater environments.

It features Fast Multi-Frequency (FMF) technology, offering simultaneous multi-frequency or 49 single frequencies from 4 to 45 kHz. The system utilizes a proprietary radio protocol for fast wireless communication between the coil and remote control.

XP Deus II RC Metal Detector with 9-inch FMF coil, remote control, and S-Telescopic stem.

Image: The XP Deus II RC Metal Detector, featuring the 9-inch FMF coil, remote control unit, and S-Telescopic stem.

Setup

1. Assembly

  1. Attach the S-Telescopic Stem: Connect the S-Telescopic stem components securely. Ensure all locking mechanisms are engaged.
  2. Mount the 9-inch FMF Coil: Secure the 9-inch FMF search coil to the lower rod of the S-Telescopic stem using the provided hardware.
  3. Install the Remote Control: Attach the remote control unit to the handle of the S-Telescopic stem. Ensure it is firmly seated and accessible for operation.

2. Initial Charging

Before first use, fully charge the remote control and the search coil. Use the provided charging cables and a compatible USB power adapter.

  • Remote Control: Provides up to 30 hours of operation on a full charge.
  • Search Coil: Provides up to 20 hours of operation, depending on selected programs and frequencies.

3. Pairing (if necessary)

The coil and remote control are typically pre-paired. If re-pairing is required, refer to the on-screen instructions on the remote control or the detailed pairing guide available on the manufacturer's website.

XP Deus II Remote Control unit showing its display and buttons.

Image: The XP Deus II Remote Control, highlighting its display and control buttons for program selection and settings adjustment.

Operating Instructions

1. Power On

Press and hold the power button on the remote control to turn on the detector. The remote control will automatically connect to the search coil.

2. Program Selection

The Deus II offers 12 pre-set factory programs for various detection scenarios. Use the navigation buttons on the remote control to browse and select a program suitable for your environment (e.g., General, Beach, Gold Field).

  • Fast Multi-Frequency (FMF): Utilizes multiple frequencies simultaneously for enhanced target identification and depth.
  • Single Frequencies: Choose from 49 single frequencies (4 to 45 kHz) for specific target types or ground conditions.

3. Audio Settings

Adjust audio settings for optimal target recognition. The detector features a 4-band equalizer and a library of sound options. Access these settings through the remote control menu.

4. Ground Balance

Perform ground balance to eliminate false signals from mineralized soil. Follow the on-screen prompts for automatic or manual ground balancing.

5. Waterproof Operation

The Deus II is certified IP68 waterproof up to 66 feet (20 meters). Ensure all connections are secure before submerging the device. For underwater use, bone conduction headphones (optional BH-01) are recommended.

Important Safety Note: Do not submerge beyond 20 meters/66 feet to avoid damage.

XP Deus II Wireless FMF Coil with frequency range indicated.

Image: The XP Deus II Wireless FMF Coil, illustrating its multi-frequency capabilities from 4 to 45 kHz.

Maintenance

1. Cleaning

  • After each use, especially in wet or sandy conditions, rinse the search coil and lower stem with fresh water.
  • Wipe the remote control and other components with a damp cloth. Avoid harsh chemicals.
  • Ensure all parts are dry before storage or charging.

2. Battery Care

  • Charge batteries regularly, even during periods of non-use, to maintain battery health.
  • Avoid fully discharging the batteries frequently.
  • Store the detector in a cool, dry place.

Troubleshooting

ProblemPossible CauseSolution
Detector does not power on.Low battery on remote control or coil.Charge both the remote control and the search coil.
No signal from coil.Coil not paired or out of range.Ensure coil is charged and within range. Re-pair if necessary (refer to pairing instructions).
Excessive false signals.Improper ground balance or high sensitivity.Perform ground balance. Reduce sensitivity setting.
Remote control mount cracking.Wear and tear on the mount.Inspect the mount regularly. Consider replacing with a durable third-party mount if issues persist.

Specifications

  • Model: DEUS2-22FMFRCEA
  • Brand: XP METAL DETECTORS
  • Search Coil Size: 9 Inches (22 FMF Coil)
  • Operating Frequencies: Fast Multi-Frequency (FMF) or 49 single frequencies (4 to 45 kHz)
  • Wireless Technology: XP patented radio protocol (10x faster than Bluetooth low latency)
  • Waterproof Rating: IP68 (up to 66 feet / 20 meters)
  • Remote Control Battery Life: Up to 30 hours
  • Search Coil Battery Life: Up to 20 hours (varies with settings)
  • Item Weight: 2.1 Pounds (approx.)
  • Product Dimensions: 24"L x 10"W x 5"H (collapsed)
  • Adjustable Length: Yes
  • Material: Plastic
  • Power Source: Battery Powered

Warranty Information

The XP Deus II Metal Detector typically comes with a manufacturer's warranty. Please refer to the official XP Metal Detectors website or the warranty card included with your product for specific terms and conditions, including warranty duration and coverage details.

Note: Certain accessories, such as the remote control mount, may be considered separate and might not be covered under the main product warranty. Always verify warranty details for all components.

Support

For further assistance, technical support, or service inquiries, please contact XP Metal Detectors directly or visit their official website.

  • Manufacturer: XP Metal Detectors
  • Official Website: www.xpmetaldetectors.com
  • Local Service Centers: Information on local service centers can usually be found on the manufacturer's website.

XP Metal Detectors is committed to long-term performance, offering ongoing software updates and 10-year parts availability.

© 2023 XP METAL DETECTORS. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.