Introduction
This manual provides essential instructions for the proper use, installation, and maintenance of the Kalecope Shockwave Therapy Machine Working Heads. These working heads are specifically designed for compatibility with Kalecope Shockwave Therapy Machine models Q60, Q80, T800, and CH800. Please read this manual thoroughly before use to ensure safe and effective operation.
Image: A set of five distinct working heads for Kalecope Shockwave Therapy Machines. Each head features a unique shape and contact surface, designed for various therapeutic applications. They are light gray with metallic contact points.
Safety Information
- Always ensure the shockwave therapy machine is turned off and unplugged before attaching or detaching working heads.
- Inspect each working head for any signs of damage or wear before use. Do not use damaged heads.
- Use only genuine Kalecope working heads with compatible Kalecope machines.
- Keep working heads clean and sterilized according to medical device guidelines.
- Store working heads in a clean, dry place away from direct sunlight and extreme temperatures.
Setup
Follow these steps to properly attach a working head to your Kalecope Shockwave Therapy Machine:
- Preparation: Ensure the shockwave therapy machine is powered off and disconnected from its power source.
- Select Head: Choose the appropriate working head for the intended application.
- Attachment: Align the chosen working head with the applicator of the shockwave therapy machine. Gently push and twist the head clockwise until it is securely fastened. Do not overtighten.
- Verification: Lightly pull on the attached head to confirm it is firmly in place and does not wobble.
Image: A detailed view of a single Kalecope Shockwave Therapy Machine Working Head, specifically designed for the Q60 model. This image highlights the connection mechanism and the smooth, rounded contact surface.
Operating Instructions
Once the working head is securely attached, you can proceed with operating your Kalecope Shockwave Therapy Machine. Refer to your specific machine's user manual for detailed operational procedures, power settings, and treatment protocols.
- Ensure the machine is powered on and ready for use.
- Apply coupling gel to the treatment area and the contact surface of the working head.
- Place the working head firmly against the skin in the treatment area.
- Initiate the shockwave therapy session according to the machine's instructions and professional guidance.
- Maintain consistent contact and appropriate pressure during the treatment.
Maintenance
Proper maintenance extends the lifespan of your working heads and ensures hygienic operation.
- Cleaning After Each Use: Immediately after each treatment, wipe the working head thoroughly with a soft cloth dampened with a mild disinfectant solution. Ensure all coupling gel residue is removed.
- Sterilization: Follow your facility's sterilization protocols for medical devices. Consult the shockwave therapy machine's manual for specific recommendations regarding working head sterilization.
- Inspection: Regularly inspect working heads for any signs of wear, cracks, or damage. Replace any damaged heads immediately.
- Storage: Store cleaned and sterilized working heads in a dry, dust-free environment, preferably in their original packaging or a dedicated storage case.
Troubleshooting
This section addresses common issues related to the working heads. For machine-specific troubleshooting, refer to your Kalecope Shockwave Therapy Machine manual.
- Working Head Not Attaching Securely:
- Ensure the head is correctly aligned with the applicator.
- Check for any debris or damage on the threads of both the head and the applicator. Clean if necessary.
- If the head still does not secure, it may be worn or damaged and should be replaced.
- Reduced Treatment Efficacy:
- Verify that the working head is clean and free of residue.
- Ensure sufficient coupling gel is used and applied correctly.
- Inspect the working head for excessive wear on the contact surface, which may require replacement.
Specifications
| Feature | Detail |
|---|---|
| Product Name | Shockwave Therapy Machine Working Heads (5pcs) |
| Brand | Kalecope |
| Compatible Models | Kalecope Q60, Q80, T800, CH800 Series |
| Package Dimensions | 5 x 5 x 2 inches |
| Package Weight | 9.6 ounces |
| Manufacturer | Kalecope |
| ASIN | B0BQCSR6D3 |
Warranty and Support
For information regarding warranty coverage for Kalecope Shockwave Therapy Machine Working Heads, please refer to the documentation provided with your original Kalecope Shockwave Therapy Machine or contact Kalecope customer support directly.
For technical assistance, replacement parts, or further inquiries, please contact Kalecope customer service through their official website or the contact information provided with your product purchase.
