1. Product Overview
The Mangar Archimedes Bath Lift Chair is designed to assist individuals with limited mobility in safely entering and exiting a bathtub. This battery-operated, waterproof device promotes independent bathing without the need for extensive bathroom modifications.
Image 1: Mangar Archimedes Bath Lift Chair.
The Mangar Archimedes Bath Lift Chair in its upright position, ready for use in a bathtub. It features a white seat and backrest with a remote control connected by a coiled cord.
2. Important Safety Information
- Maximum Weight Capacity: Do not exceed the maximum weight recommendation of 361.56 pounds (164 kg).
- Battery Charge: Always ensure the hand control is fully charged before use. The lift will not lower if there is insufficient battery power to raise you back out.
- Secure Placement: Verify that all non-slip suction cups are firmly attached to the bathtub surface before each use.
- Anti-Pinch Flaps: Be aware of the anti-pinch bath flaps and ensure no skin or clothing is caught during operation.
- Supervision: If the user requires assistance, ensure a caregiver is present during operation.
- Waterproof Remote: The remote control is waterproof, but avoid submerging the charger.
Image 2: Safety Notice for Archimedes Bath Lift.
A graphic illustrating key safety points: charging the hand control overnight before first use, always raising the seat using the hand control before lowering, and the maximum weight limit of 364 lbs.
3. Package Contents
Verify that all the following components are included in your package:
- Archimedes Bath Lift Chair (main unit)
- Waterproof Hand Control
- Battery Charger
- User Manual (this document)
4. Setup and Assembly
The Archimedes Bath Lift is designed for quick and tool-free assembly.
- Unpack Components: Carefully remove all parts from the packaging.
- Attach Backrest: Position the backrest onto the main seat unit and secure it according to the click-in mechanism.
- Attach Side Flaps: Slide the side flaps into their designated slots on either side of the seat.
- Charge Hand Control: Before first use, plug the hand control into the charger and allow it to charge overnight (approximately 2.5 hours for a full charge).
- Position in Bathtub: Place the assembled bath lift into the bathtub. Press firmly on the seat to engage the non-slip suction cups to the tub floor. Ensure the lift is stable and does not shift.
Video 1: Mangar Archimedes Bath Lift Chair Assembly and Operation.
This video demonstrates the simple assembly process of the Mangar Archimedes Bath Lift Chair, showing how to attach the backrest and side flaps. It also illustrates the lift's operation, including lowering and raising the user, and highlights its portability and waterproof remote control.
Image 3: Archimedes Bath Lift with side flaps.
A detailed view of the Archimedes Bath Lift Chair, highlighting its side flaps that provide additional support and prevent pinching during movement. The image also shows the compact construction and stable base with self-releasing suction cups.
5. Operating Instructions
The bath lift is operated using the waterproof hand control.
- Entering the Bathtub:
- Sit on the bath lift seat while it is in its raised position.
- Press and hold the DOWN button on the hand control to slowly lower yourself into the bathtub. Release the button to stop at any desired height.
- Exiting the Bathtub:
- Press and hold the UP button on the hand control to slowly raise yourself out of the bathtub. Release the button to stop at any desired height.
- Once fully raised, carefully transfer out of the bathtub.
- Emergency Stop: The hand control features a quick-release button for added safety, allowing immediate cessation of movement.
Image 4: User operating the Archimedes Bath Lift.
A user comfortably seated on the Archimedes Bath Lift Chair in a bathtub, holding the waterproof remote control. This image illustrates the ease of use and the independence the lift provides during bathing.
6. Features and Benefits
- Regain Independence: Designed to fit almost any bathtub, eliminating the need for bathroom remodeling.
- Battery Powered Hand Control: Easy to use, fully waterproof, and does not require a nearby electrical outlet during operation.
- Advanced Safety Feature: The lift will only lower you into the bath if there is sufficient battery power to raise you back out.
- Anti-Pinch Bath Flaps: Prevents skin or clothing from getting caught while the lift is in motion.
- Easy Cleaning: Disassembles into three parts for convenient cleaning and storage.
- Compact Construction: Minimum height of only 2.75 inches for an immersive bath experience.
- Portable: Weighs 22 pounds, making it easy to move and store.
Image 5: Key features of the Archimedes Bath Lift.
An infographic highlighting the key features of the Archimedes Bath Lift, including its high backrest for optimal support, pinch-free wings, battery-powered hand control, compact construction for immersive bathing, and stable base with self-releasing suction cups.
Image 6: Dimensions and weight capacity of the Mangar Archimedes Bath Lift.
This image displays the dimensions of the Mangar Archimedes Bath Lift (43" H x 33" W x 27" D) and its weight of 22 pounds, along with the maximum weight recommendation of 364 lbs. A senior woman in a bathrobe is shown next to the lift, emphasizing its suitability for elderly users.
7. Maintenance and Cleaning
- Regular Cleaning: Clean the bath lift regularly with a mild, non-abrasive cleaner and a soft cloth. Rinse thoroughly and dry.
- Disassembly for Cleaning: The unit can be easily disassembled into three parts for more thorough cleaning and storage.
- Battery Care: Always charge the hand control when the battery indicator shows low power. Avoid completely draining the battery.
- Storage: Store the bath lift in a dry place when not in use.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bath lift does not operate. | Low or no battery charge in hand control. | Charge the hand control overnight. Ensure charger is properly connected. |
| Bath lift shifts or moves in the tub. | Suction cups not properly engaged or tub surface is not smooth. | Press firmly on the seat to engage suction cups. Ensure tub surface is clean and free of debris. If tub surface is textured, suction cups may not adhere properly. |
| Charger not working. | Faulty charger or connection. | Check charger connection. If issues persist, contact customer support for a replacement charger. |
9. Specifications
- Brand: Mangar
- Model Number: 2c129876-6e01-4046-be37-b0f6e8946f6e
- Product Dimensions: 17"D x 15.5"W x 2.75"H (folded)
- Item Weight: 22 Pounds
- Maximum Weight Recommendation: 361.56 Pounds
- Batteries: 1 AA batteries required (included for remote)
- Color: White
10. Warranty and Support
For warranty information or technical support, please refer to the manufacturer's official website or contact their customer service department. Keep your purchase receipt for warranty claims.
Legal Disclaimer: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
