Azwok EN3AB39H

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Azwok EN3AB39H Remote Control User Manual

Replacement Remote for Hisense TVs

Introduction

This manual provides comprehensive instructions for the Azwok EN3AB39H replacement remote control, designed for various Hisense TV models. This remote functions as a direct replacement, offering all major buttons and functions of the original remote without requiring any programming.

Compatible Hisense TV Models:

  • 43P1, 55P1, 65P1
  • 55PX, 65PX
  • 50R7, 55R7, 65R7, 75R7
  • 65R8, 75R8
  • 39P4, 49P4, 55P4
  • 24P2, 32P2

If your specific model is not listed, or if your original remote differs significantly, please refer to the 'Support' section for assistance.

Front view of the Azwok EN3AB39H replacement remote control

Image: Front view of the Azwok EN3AB39H replacement remote control, showing all buttons and layout.

Setup

The Azwok EN3AB39H remote control is designed for immediate use without any complex programming. Simply install the batteries, and it will be ready to operate your compatible Hisense TV.

Battery Installation

  1. Locate the battery compartment on the back of the remote control.
  2. Slide the battery compartment cover downwards or press the latch and lift to open.
  3. Insert two (2) AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the indicators inside the compartment.
  4. Replace the battery compartment cover by sliding it back into place until it clicks securely.

Note: Batteries are not included with the remote control.

Battery compartment of the Azwok EN3AB39H remote control with two AAA batteries inserted

Image: The battery compartment of the Azwok EN3AB39H remote control, showing the correct orientation for inserting two AAA batteries.

Operating Instructions

Once batteries are installed, the remote control is ready for use. Point the remote directly at your Hisense TV and press the desired buttons to control functions such as power, volume, channel selection, and smart TV features.

Basic Functions

  • Power Button: Turns the TV on or off.
  • Number Buttons (0-9): Direct channel input.
  • Volume Up/Down: Adjusts the TV volume.
  • Channel Up/Down: Changes TV channels sequentially.
  • Navigation Pad (Up/Down/Left/Right/OK): Navigates menus and confirms selections.
  • Input: Selects input sources (HDMI, AV, etc.).
  • Netflix / YouTube / Media: Dedicated buttons for quick access to streaming services and media playback.

Refer to your Hisense TV's original user manual for specific functions of each button if you require detailed information beyond basic operation.

Maintenance

Cleaning

To clean the remote control, use a soft, dry cloth. For stubborn dirt, lightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid using harsh chemicals or excessive moisture, as these can damage the remote's electronics.

Battery Replacement

Replace batteries when the remote's responsiveness decreases or it stops functioning. Always replace both batteries at the same time with new AAA alkaline batteries. Do not mix old and new batteries, or different types of batteries.

Back view of the Azwok EN3AB39H remote control, showing the battery compartment cover

Image: Back view of the Azwok EN3AB39H remote control, highlighting the battery compartment cover.

Troubleshooting

Remote Not Responding

  • Check Batteries: Ensure batteries are inserted correctly with the correct polarity and are not depleted. Replace with fresh AAA batteries if necessary.
  • Line of Sight: Make sure there are no obstructions between the remote control and the TV's infrared receiver. The remote uses infrared technology, requiring a clear line of sight.
  • Remote Sensor: Ensure the TV's remote sensor is clean and not blocked.
  • Compatibility: Verify that your Hisense TV model is listed in the 'Introduction' section as compatible. While this remote is a direct replacement for many models, some specific TV models may have unique requirements.

Limited Functionality

If certain buttons do not work, or if the remote does not fully control your TV, double-check the compatibility with your specific Hisense TV model. Some advanced features or smart TV functions might require the original remote or a specific universal remote with programming capabilities.

Specifications

BrandAzwok
Model NumberEN3AB39H (AU-EN3AB39H-HS024)
Special FeatureNo Programming Required
Max Number of Supported Devices1 (Television)
Connectivity TechnologyInfrared
Button Quantity20
Maximum Range10 Meters
Number of Batteries Required2 AAA batteries
Battery TypeAlkaline
Item Weight96 Grams

Warranty Information

This Azwok EN3AB39H remote control comes with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product functions as intended under normal use. Please retain your proof of purchase for any warranty claims.

Support

If you encounter any issues not covered in the troubleshooting section, or if you are unsure about the compatibility of this remote with your specific Hisense TV model, please contact Azwok customer support. Our team will be happy to assist you in finding the correct solution or confirming suitability.

For support inquiries, please refer to the contact information provided with your purchase or visit the official Azwok website.

© 2023 Azwok. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.