ANLAN Hot and Cold Facial Beauty Device User Manual

Introduction

The ANLAN Hot and Cold Facial Beauty Device is an 8-in-1 multi-functional skincare tool designed for home use. It integrates various technologies including hot and cold therapy, EMS (Electrical Muscle Stimulation), Ion cleansing and moisturizing, and LED light therapy to provide a comprehensive facial treatment experience.

Figure 1: ANLAN Hot and Cold Facial Beauty Device and included cotton sheets.

Safety Precautions

Please read all instructions carefully before using the device. Keep this manual for future reference.

• Do not use the device on broken, irritated, or infected skin.
• Consult a physician before use if you have any pre-existing medical conditions, are pregnant, or have electronic implants.
• Keep the device out of reach of children.
• Do not immerse the device in water or use it in excessively humid environments.
• Ensure your skin is adequately hydrated, especially when using EMS functions, to prevent discomfort or poor conductivity.
• Always start with the lowest intensity level when using EMS for the first time.
• Discontinue use if you experience any discomfort or adverse reactions.

Package Contents

Verify that all items are present in the package:

• ANLAN Heating and Cooling Facial Device
• 150 sheets of cotton
• Charging Cable
• Instruction Manual

Setup

Charging the Device

1. Connect the charging cable to the device's charging port.
2. Plug the other end of the cable into a compatible USB power adapter (not included) or a USB port.
3. The battery indicator on the device screen will show charging status.
4. Charge the device fully before first use.

Attaching Cotton Sheets (for Clean Mode)

1. Place one cotton sheet over the treatment head of the device.
2. Secure the cotton sheet with the provided cotton ring.
3. Apply your preferred lotion or cleansing solution to the cotton sheet.

Figure 2: Attaching a cotton sheet with the cotton ring for cleansing mode.

Operating Instructions

General Operation

• Power On/Off: Press and hold the power button (U symbol) to turn the device on or off.
• Mode Selection: Short press the power button to cycle through different modes (Clean, Cool, EMS Lifting, Moisturizing, Cold Synthesis). The current mode will be displayed on the screen.
• Vibration Function: Press and hold the (-/+) button to toggle the vibration function on or off within a selected mode.
• Intensity Level Adjustment: Short press the (-/+) button to adjust the intensity level (3 levels available for EMS).
• LED Light Selection: Press the LED button to switch between Red and Blue LED light therapy.

Figure 3: Device screen displaying various operational modes.

Specific Mode Functions

1. Hot & Cooling Function

This function allows for temperature control to enhance skincare. The hot mode ranges from 38°C to 42°C, while the cooling mode ranges from 6°C to 12°C. Select the desired temperature based on your skin's needs and the season.

Figure 4: Hot (38-42°C) and Cold (6-12°C) therapy modes for pore care.

2. Ion Facial Beautifying Device (Clean & Moisturizing Modes)

• Clean Mode: Use with a cotton ring holding a cotton sheet soaked in lotion. This mode helps to deeply cleanse pores.
• Moisturizing Mode: Use with your preferred lotion or sheet mask to enhance absorption of skincare products.

Figure 5: Ion+ (cleansing) and Ion- (moisturizing) functions.

3. EMS (Electrical Muscle Stimulation) Function

The device features 3 adjustable EMS levels. Always begin with Level 1, especially during your first use, to allow your skin to adapt. Ensure your skin is fully hydrated with serum or moisturizing gel before using EMS, as dry skin can lead to poor conductivity and reduced vibration. Make sure to touch the silver induction sight bar on the handle and ensure the electrode head has full contact with your skin for optimal performance.

4. LED Light Therapy

The device incorporates LED light therapy with different light colors for various skin benefits:

• Red Light: Typically used for promoting skin rejuvenation and improving skin elasticity.
• Blue Light: Often used for calming skin and addressing specific skin concerns.

Figure 6: Red and Blue LED light therapy functions.

Usage Directions

After washing your face as usual, apply your preferred skincare product (e.g., serum, lotion, or sheet mask) to your skin. Select the desired mode and intensity on the device. Gently glide the treatment head over your face, ensuring full contact with the skin. Follow the specific instructions for each mode as described above.

Maintenance

Cleaning the Device

1. Ensure the device is turned off and unplugged before cleaning.
2. Wipe the treatment head and body of the device with a soft, damp cloth.
3. Do not use abrasive cleaners, alcohol, or harsh chemicals.
4. Ensure the device is completely dry before storing or recharging.

Storage

Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it in its original packaging or a protective case to prevent damage.

Troubleshooting

Specifications

Warranty and Support

For information regarding warranty coverage, returns, or technical support, please refer to the warranty card included with your product or contact the seller/manufacturer directly. Keep your purchase receipt as proof of purchase.