Azwok RM-ED017

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Azwok RM-ED017 Replacement Remote Control User Manual

Model: RM-ED017

1. Introduction

This manual provides instructions for the Azwok RM-ED017 Replacement Remote Control, designed as a direct replacement for original Sony RM-ED017 remote controls. It offers all primary functions and buttons found on the original remote, ensuring seamless operation with compatible Sony TV models. No programming is required; simply insert batteries to begin use.

Compatible Sony TV Models include:

  • KDL-19L4000, KDL-22S5500, KDL-32P5600, KDL-32S5600, KDL-36S5550
  • KDL-37S5600, KDL-40P3600, KDL-22P5500, KDL-26L4000, KDL-26P5550
  • KDL-32P3500, KDL-32P3600, KDL-32P5550, KDL-32S5500, KDL-40S5600
  • KDL-32S5650, KDL-37P3600, KDL-37S5500, KDL-37S5650, KDL-40P5600
  • KDL-40S5500, KDL-40S5650

2. Setup

2.1 Battery Installation

The remote control requires two (2) AA batteries (not included) for operation. Follow these steps to install them:

  1. Locate the battery compartment on the back of the remote control.
  2. Slide the battery compartment cover downwards to open it.
  3. Insert two AA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
  4. Slide the battery compartment cover back into place until it clicks securely.
Back of the Azwok RM-ED017 remote control with the battery cover removed, showing the two AA battery slots.

Figure 1: Back of the remote control with the battery compartment open, showing battery placement.

Back of the Azwok RM-ED017 remote control with the battery cover closed.

Figure 2: Back of the remote control with the battery compartment closed.

2.2 Initial Use

Once batteries are installed, the remote control is ready for immediate use. No additional programming or pairing is required. Point the remote control directly at your Sony TV and press the desired function button.

3. Operating Instructions

The Azwok RM-ED017 remote control functions identically to the original Sony RM-ED017 remote. All buttons perform their standard functions for compatible Sony TV models.

Front view of the Azwok RM-ED017 replacement remote control, showing all buttons and layout.

Figure 3: Front view of the Azwok RM-ED017 remote control.

3.1 Basic Functions

  • Power Button: Turns the TV on or off.
  • Number Buttons (0-9): Selects channels directly.
  • Channel Up/Down: Navigates through channels sequentially.
  • Volume Up/Down: Adjusts the TV's volume level.
  • Mute Button: Silences the TV audio.
  • Menu Button: Accesses the TV's main menu.
  • Navigation Buttons (Up, Down, Left, Right, Enter): Used to navigate menus and confirm selections.
  • Return/Back Button: Returns to the previous screen or menu.
  • Input/Source Button: Changes the TV's input source (e.g., HDMI, AV).

Refer to your Sony TV's original user manual for specific functions of advanced buttons if needed.

4. Maintenance

4.1 Cleaning

To clean the remote control, use a soft, dry cloth. For stubborn dirt, lightly dampen the cloth with water or a mild cleaning solution. Avoid using abrasive cleaners, solvents, or alcohol, as these can damage the remote's surface or internal components.

4.2 Battery Replacement

Replace batteries when the remote control becomes unresponsive or its range decreases significantly. Always replace both AA batteries at the same time with new ones. Do not mix old and new batteries, or different types of batteries, as this can lead to leakage or malfunction.

4.3 Storage

Store the remote control in a cool, dry place away from direct sunlight and extreme temperatures. If the remote will not be used for an extended period, remove the batteries to prevent leakage and potential damage.

5. Troubleshooting

If you experience issues with your Azwok RM-ED017 remote control, try the following troubleshooting steps:

  • Remote Not Responding:
    • Ensure batteries are correctly installed with the correct polarity (+/-).
    • Replace old batteries with new AA batteries.
    • Check for any obstructions between the remote control and the TV's infrared sensor.
    • Ensure you are within the effective operating range and pointing the remote directly at the TV.
  • Specific Buttons Not Working:
    • This remote is a direct replacement. If a specific button does not work, verify that your TV model is listed as compatible.
    • Clean the remote control, especially around the unresponsive button, to remove any debris that might be preventing proper contact.
  • Intermittent Operation:
    • This often indicates low battery power. Replace the batteries.
    • Ensure no strong light sources (like direct sunlight or bright fluorescent lights) are interfering with the TV's IR receiver.

If problems persist after trying these steps, please refer to the Warranty & Support section for further assistance.

6. Specifications

FeatureDetail
Model NumberAU-RM-ED017-SN092
Product Dimensions7.87 x 1.97 x 0.79 inches
Item Weight2.75 ounces
Batteries Required2 AA batteries (not included)
Connectivity TechnologyInfrared
Compatible DevicesTelevision
Special FeatureNo Programming Required

7. Warranty & Support

7.1 Warranty Information

This Azwok RM-ED017 Replacement Remote Control comes with a 12-month replacement warranty from the date of purchase. This warranty covers manufacturing defects and ensures that the product functions as intended. Returns are accepted for refund or exchange if the remote control does not work with your compatible devices.

7.2 Customer Support

If you have any questions, encounter issues not covered in this manual, or need assistance with compatibility, please contact Azwok customer support. Provide your product model number (RM-ED017) and your TV model number for faster service.

Note: If your specific TV model number is not listed in the compatibility section or if your original remote differs significantly from the RM-ED017, please contact customer support to confirm suitability before purchase or for troubleshooting.

© 2023 Azwok. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.