Cecotec Conga CarpetClean 20000 Pro Wet & Dry Vacuum Cleaner User Manual

1. Introduction

Thank you for choosing the Cecotec Conga CarpetClean 20000 Pro Wet & Dry Vacuum Cleaner. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your appliance. Please read it thoroughly before first use and keep it for future reference.

This powerful 1400W appliance is designed for versatile cleaning, capable of vacuuming both solids and liquids, and offering professional upholstery cleaning with its specialized accessories and pressurized spray function. It features a large 20-liter dirty water tank and a 4-liter clean water tank, providing an extensive operating radius of over 7 meters.

2. Important Safety Instructions

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, or injury.

• Read all instructions before using the appliance.
• Do not leave the appliance unattended when plugged in. Unplug from outlet when not in use and before servicing.
• Do not use outdoors or on wet surfaces.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only manufacturer's recommended attachments.
• Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not pick up toxic material, such as chlorine bleach, ammonia, or drain cleaner.
• Do not use without filters in place.
• Turn off all controls before unplugging.
• Use extra care when cleaning on stairs.

3. Product Components

Familiarize yourself with the parts of your Cecotec Conga CarpetClean 20000 Pro.

Included Accessories:

• Main Unit with Motor Head and Tanks
• Flexible Hose
• Extension Wands
• Upholstery Cleaning Nozzle with Spray Function
• Floor Nozzle (for wet and dry use)
• Crevice Tool
• Brush Tool
• HEPA Filter

4. Setup

1. Unpacking: Carefully remove all components from the packaging. Check for any damage.
2. Assemble the Main Unit:
   • Ensure the dirty water tank (20L) is securely placed on the wheeled base.
   • Place the motor head onto the dirty water tank and secure the latches.
3. Install the HEPA Filter: For dry vacuuming, ensure the HEPA filter is correctly installed inside the motor head.

   

4. Connect the Hose: Attach the flexible hose to the suction inlet on the main unit. Ensure it clicks into place.
5. Attach Extension Wands and Nozzle: Connect the desired extension wands to the hose, then attach the appropriate cleaning nozzle (e.g., floor nozzle for general cleaning, upholstery nozzle for fabric cleaning).
6. Fill Clean Water Tank (for wet cleaning/spray function): Open the cap of the 4-liter clean water tank (located on the motor head) and fill it with clean water and, if desired, a suitable non-foaming cleaning solution. Do not overfill.

   

5. Operating Instructions

5.1. Dry Vacuuming

1. Ensure the HEPA filter is installed.
2. Connect the desired dry vacuuming accessory (e.g., floor nozzle, brush tool, crevice tool).
3. Plug the appliance into a suitable power outlet.
4. Turn on the vacuum cleaner using the power switch.
5. Move the nozzle slowly over the surface to be cleaned.
6. After use, turn off the appliance and unplug it.

5.2. Wet Vacuuming (Liquids)

1. Remove the HEPA filter if installed, as it is not suitable for wet use.
2. Attach the appropriate wet vacuuming nozzle (e.g., floor nozzle with squeegee insert).
3. Plug the appliance into a suitable power outlet.
4. Turn on the vacuum cleaner.
5. Carefully vacuum up spilled liquids. Do not exceed the maximum fill line of the dirty water tank.
6. After use, turn off the appliance, unplug it, and empty the dirty water tank immediately.

5.3. Upholstery and Carpet Cleaning (Wet Extraction)

1. Ensure the HEPA filter is removed.
2. Fill the 4-liter clean water tank with water and a suitable non-foaming upholstery cleaning solution.
3. Attach the upholstery cleaning nozzle with the spray function.
4. Connect the spray hose to the designated port on the main unit.
5. Plug the appliance into a suitable power outlet.
6. Turn on the vacuum cleaner.
7. Press the spray trigger on the nozzle handle to apply cleaning solution to the surface.
8. Move the nozzle slowly over the wet area to extract the dirty solution. Repeat as necessary until the area is clean.
9. After cleaning, vacuum the area thoroughly to remove as much moisture as possible.
10. Turn off the appliance, unplug it, and empty both tanks.

6. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your vacuum cleaner.

6.1. Emptying and Cleaning Tanks

• Always unplug the appliance before performing any maintenance.
• Dirty Water Tank: After each wet use, unlatch the motor head and carefully lift it off. Empty the dirty water tank (20L) and rinse it thoroughly with clean water.
• Clean Water Tank: Empty any remaining solution from the 4L clean water tank and rinse it.
• Allow both tanks to air dry before reassembling.

6.2. Cleaning the HEPA Filter

• For dry vacuuming, the HEPA filter should be cleaned regularly.
• Remove the HEPA filter from the motor head.
• Tap the filter gently to dislodge dust and debris. You may also use a soft brush or another vacuum cleaner on a low setting to clean it.
• Do not wash the HEPA filter with water unless explicitly stated in the product's specific instructions (not provided here). If it becomes heavily soiled or damaged, replace it.

6.3. Cleaning Accessories

• Rinse all nozzles, hoses, and extension wands with clean water after wet use.
• Ensure all parts are dry before storage.

6.4. Storage

• Store the vacuum cleaner and its accessories in a dry, cool place, away from direct sunlight and extreme temperatures.
• Ensure the power cord is neatly wrapped to prevent damage.

7. Troubleshooting

Before contacting customer support, please refer to the following troubleshooting guide for common issues.

8. Specifications

9. Warranty and Support

Specific warranty details and contact information for support are typically provided with your product purchase documentation or on the manufacturer's official website. Please refer to those resources for the most accurate and up-to-date information.

For general inquiries or to register your product, visit the official Cecotec website.

Note: No official product videos from the seller were found in the provided data to embed in this manual.