Cecotec Bolero Flux PM 906500 Black 90cm Pyramid Range Hood Instruction Manual

1. Introduction

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Cecotec Bolero Flux PM 906500 Black 90cm Pyramid Range Hood. Please read these instructions carefully before use and retain them for future reference.

Image: Front view of the Cecotec Bolero Flux PM 906500 Black 90cm Pyramid Range Hood.

2. Safety Instructions

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury.

• Ensure the power supply matches the voltage specified on the rating plate.
• Do not allow children to operate the appliance.
• Regularly clean grease filters to prevent fire hazards.
• Do not flambé under the range hood.
• Ensure adequate ventilation in the room when the range hood is used simultaneously with gas or other fuel-burning appliances.
• Disconnect the appliance from the power supply before cleaning or maintenance.
• Installation must be performed by a qualified technician.

3. Package Contents

Verify that all components are present and undamaged upon unpacking.

• 1 x Cecotec Bolero Flux PM 906500 Range Hood
• Installation accessories (screws, wall plugs, etc.)
• User Manual
• Exhaust duct (may be included, as per customer review)
• Charcoal filters (may be included or sold separately for recirculation mode)

4. Product Overview and Features

The Cecotec Bolero Flux PM 906500 is a 90 cm pyramid-style range hood designed for efficient kitchen ventilation.

• Width: 90 cm, suitable for standard cooking areas.
• Finish: Black.
• Motor Power: 165 W.
• Extraction Capacity: Up to 650 m³/h.
• Control Type: Mechanical push-button controls.
• Power Levels: 3 adjustable speed settings.
• Lighting: Integrated LED lighting for illuminating the cooking surface.
• Filters: 5-layer aluminum grease filters and optional charcoal filters for recirculation.
• Energy Class: A.

Image: Front view of the range hood installed above a cooktop.

Image: Close-up of the mechanical push-button controls for power levels and lighting.

5. Setup and Installation

This range hood is designed for wall-mounted installation. Professional installation is recommended.

5.1 Dimensions

Ensure sufficient space for installation. The overall dimensions are crucial for proper fitting above your cooking area.

Image: Diagram showing the dimensions of the range hood: 95.1 cm height, 90 cm width, and 50.5 cm depth.

• Product Dimensions (D x W x H): 50.5 x 90 x 95.1 cm
• Mounting Type: Wall-mounted (Pyramidal design)

5.2 Installation Steps (General)

1. Mark the drilling points on the wall according to the installation template (not provided in detail here, refer to full manual).
2. Drill holes and insert wall plugs.
3. Secure the mounting bracket to the wall.
4. Mount the range hood body onto the bracket.
5. Connect the exhaust ducting to an external vent or install charcoal filters for recirculation mode.
6. Connect the power supply.
7. Install the decorative chimney sections.

Note: Detailed installation instructions, including specific measurements and electrical connections, are provided in the comprehensive manual included with the product.

6. Operating Instructions

The range hood features mechanical push-button controls for easy operation.

6.1 Power On/Off

Press the power button (⏻) to turn the range hood on or off.

6.2 Adjusting Fan Speed

Select one of the three available power levels using the corresponding buttons:

• Level 1: Low speed for light cooking and simmering.
• Level 2: Medium speed for general cooking.
• Level 3: High speed for intense cooking, frying, or strong odors.

6.3 LED Lighting

Press the light button (💡) to turn the integrated LED lights on or off, providing illumination for your cooking area.

Image: The range hood with its LED lighting activated, illuminating the cooktop below.

7. Maintenance

Regular maintenance ensures optimal performance and longevity of your range hood.

7.1 Cleaning Aluminum Grease Filters

The 5-layer aluminum grease filters should be cleaned regularly (approximately every 2-4 weeks, depending on usage) to maintain extraction efficiency and prevent grease buildup.

• To remove: Push the latch on the filter and pull downwards.
• Cleaning: Filters are dishwasher-safe. Alternatively, wash by hand with hot water and a mild detergent.
• To reinstall: Insert the filter back into its slot and push up until it clicks into place.

Image: Illustration demonstrating the easy removal of the dishwasher-safe aluminum filters.

7.2 Replacing Charcoal Filters (for Recirculation Mode)

If your range hood operates in recirculation mode (without external venting), charcoal filters are essential for odor removal. These filters cannot be washed and must be replaced every 3-6 months, depending on usage.

• To access: Remove the aluminum grease filters.
• To replace: Twist the old charcoal filter to unlock and remove. Install the new charcoal filter by twisting it into place.

Image: A pair of circular charcoal filters, used for odor absorption in recirculation mode.

Image: Illustration depicting how air passes through the charcoal filters to eliminate smoke and odors.

7.3 Exterior Cleaning

Clean the exterior surfaces with a soft cloth and mild, non-abrasive detergent. Avoid using harsh chemicals or abrasive cleaners that could damage the finish.

8. Troubleshooting

If you encounter issues with your range hood, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, contact customer support.

9. Specifications

Detailed technical specifications for the Cecotec Bolero Flux PM 906500 Range Hood.

Image: Energy label indicating the appliance's energy efficiency class A, annual energy consumption, and noise level.

For detailed product information and compliance, refer to the official EPREL database:

EPREL Product Information (QR Code Link)

10. Warranty and Support

Cecotec provides customer support and warranty services for its products.

• Manufacturer: Cecotec Innovaciones S.L.
• Country of Origin: Spain
• Website: www.cecotec.es
• Email: legal@cecotec.es
• Telephone: +34 963 21 07 28
• Address: Av. Reyes Católicos 60, 46910 Alfafar, España

For warranty claims or technical assistance, please contact Cecotec customer service directly using the provided contact information. Keep your proof of purchase for warranty validation.