Introduction
Thank you for choosing the Cecotec Cremmaet Compact Super-Automatic Coffee Machine. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read it thoroughly before first use and keep it for future reference.
This compact super-automatic coffee machine is designed to prepare espressos and Americanos from freshly ground coffee beans with the touch of a button, thanks to its Plug&Play system. It features a 19-bar pressure pump for optimal crema and aroma, a rapid Thermoblock heating system, and automatic cleaning for convenience.
Important Safety Instructions
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and/or injury to persons, including the following:
- Read all instructions before using the appliance.
- Do not touch hot surfaces. Use handles or knobs.
- To protect against fire, electric shock, and injury to persons, do not immerse cord, plugs, or appliance in water or other liquid.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
- Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or adjustment.
- The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or injury to persons.
- Do not use outdoors.
- Do not let cord hang over edge of table or counter, or touch hot surfaces.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to "off", then remove plug from wall outlet.
- Do not use appliance for other than intended use.
Product Overview
Familiarize yourself with the components of your Cecotec Cremmaet Compact coffee machine:
- A. Control Panel: Intuitive interface for selecting coffee types and adjusting settings.
- B. Coffee Spout: Where the brewed coffee is dispensed.
- C. Drip Tray: Collects excess liquid and prevents spills.
- D. Water Tank: Removable tank for water, with a capacity of 1.1 liters.
- E. Bean Hopper: Container for coffee beans, with a capacity of 150g, featuring an integrated conical grinder.
- F. Grounds Container: Collects used coffee grounds.
Image: Front view of the Cecotec Cremmaet Compact coffee machine, showing coffee being dispensed into a glass. This illustrates the coffee spout and drip tray.
Image: The coffee machine positioned on a kitchen counter, surrounded by coffee beans, sugar cubes, and a wooden cutting board, demonstrating its compact size and typical setup.
Setup
- Unpacking: Carefully remove all packaging materials. Ensure all components are present and undamaged.
- Placement: Place the machine on a stable, flat, and dry surface, away from heat sources and water. Ensure adequate ventilation around the appliance.
- Fill Water Tank: Remove the water tank (D) and fill it with fresh, cold drinking water up to the MAX level. Reinsert the tank securely.
Image: A hand lifting the lid of the water tank on top of the coffee machine, indicating where to add water.
- Add Coffee Beans: Open the lid of the bean hopper (E) and pour fresh coffee beans into it. The hopper has a capacity of 150g. Close the lid.
Image: Hands pouring coffee beans from a wooden scoop into the bean hopper located on the top of the coffee machine.
- Plug In: Connect the power cord to a grounded electrical outlet.
- Initial Rinse Cycle: Upon first use or after a long period of inactivity, the machine may perform an automatic rinse cycle. Follow the on-screen prompts if any.
Operating Instructions
Making Coffee
- Turn On: Press the power button to turn on the machine. It will heat up and perform a brief rinse cycle.
- Place Cup: Place a cup or mug under the coffee spout.
- Select Coffee: Use the control panel to select your desired coffee type (e.g., Espresso, Americano).
Image: A hand pressing one of the illuminated buttons on the control panel, demonstrating the ease of selecting a coffee type.
- Adjust Settings (Optional): You can customize the quantity and intensity of your coffee. Refer to the on-screen display or specific buttons for these adjustments. The machine allows you to easily personalize and memorize these settings.
- Start Brewing: Press the selected coffee button again to start the brewing process. The machine will grind the beans and dispense the coffee.
- Enjoy: Once brewing is complete, remove your cup and enjoy your fresh coffee.
Grind Level Adjustment
The integrated conical grinder has 5 levels of grinding. Adjusting the grind level can impact the coffee's flavor and strength. Finer grinds are typically for espresso, while coarser grinds are for Americano or lighter coffee.
- To adjust, locate the grind adjustment knob inside the bean hopper.
- Turn the knob to select your desired grind level. Adjustments should ideally be made while the grinder is running to prevent damage.
Maintenance and Cleaning
Regular cleaning and maintenance ensure optimal performance and longevity of your coffee machine.
Daily Cleaning
- Drip Tray and Grounds Container: Empty and rinse the drip tray and grounds container daily. These parts are usually dishwasher safe or can be washed with warm soapy water.
- Automatic Cleaning: The machine features an automatic cleaning function to keep it ready for use. This cycle typically runs upon startup and shutdown.
Image: A graphic icon depicting a water droplet, symbolizing the automatic cleaning function of the coffee machine.
- Coffee Spout: Wipe the coffee spout with a damp cloth to remove any coffee residue.
Weekly/Bi-Weekly Cleaning
- Water Tank: Clean the water tank thoroughly with warm water and a mild detergent. Rinse well before refilling.
- Brew Group: If removable, rinse the brew group under lukewarm running water. Allow it to air dry completely before reinserting. Refer to the specific instructions for your model if the brew group is removable.
Descaling
The machine will indicate when descaling is necessary. Use a descaling solution specifically designed for coffee machines and follow the instructions provided with the descaling product and your machine's display prompts.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No coffee is dispensed. | Water tank empty; coffee beans empty; brew group clogged. | Refill water tank; refill bean hopper; clean brew group. |
| Coffee is too weak or watery. | Grind setting too coarse; insufficient coffee quantity; old coffee beans. | Adjust grind to a finer setting; increase coffee intensity setting; use fresh coffee beans. |
| Machine is leaking water. | Drip tray full; water tank not properly seated; internal component issue. | Empty drip tray; ensure water tank is correctly inserted; contact customer support if problem persists. |
| Grinder is very noisy or not grinding. | Foreign object in grinder; bean hopper empty. | Check for foreign objects (e.g., stones) in the bean hopper (unplug first!); refill bean hopper. |
If the problem persists after attempting these solutions, please contact Cecotec Customer Support.
Specifications
| Feature | Detail |
|---|---|
| Brand | Cecotec |
| Model Number | 01636 |
| Style | Cremmaet Compact |
| Power | 1350 Watts |
| Voltage | 230 Volts |
| Pressure Pump | 19 Bars |
| Water Tank Capacity | 1.1 Liters |
| Coffee Bean Hopper Capacity | 150 Grams |
| Grinder Type | Integrated Conical Grinder (5 levels) |
| Heating System | Thermoblock |
| Special Features | Integrated coffee grinder, Automatic cleaning function, Plug&Play system |
| Material | Plastic |
| Color | Black |
| Item Weight | 7.4 Kilograms |
| Dimensions (L x W x H) | 10P x 10l x 10H millimeters (Note: These dimensions seem generic, actual product might differ) |
Warranty and Support
Cecotec products come with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Cecotec website. The availability of spare parts is guaranteed for 10 years.
For technical support, service, or to order spare parts, please contact Cecotec Customer Service through their official channels. You may need your product model number (01636) and proof of purchase when contacting support.
You can find more information and support at the official Cecotec website: www.cecotec.com
