Cecotec Power Espresso 20 Steel Pro Latte Semi-Automatic Coffee Machine User Manual

1. Introduction

Welcome to the user manual for your new Cecotec Power Espresso 20 Steel Pro Latte semi-automatic coffee machine. This appliance is designed to prepare a wide variety of hot beverages, including espresso, cappuccino, and lattes, with ease and efficiency. Featuring a powerful 1350W motor, Thermoblock heating system for rapid and homogeneous water and milk heating, and a 20-bar ForceAroma pump, it ensures optimal cream and maximum aroma for your coffee. The integrated Full-Milk reservoir and Instant Cappuccino system allow for one-touch preparation of milk-based drinks.

Key features include:

• Semi-automatic operation for various hot drinks and cappuccinos.
• Instant Cappuccino system for direct coffee and milk dispensing.
• Elegant and compact design with 1350W power.
• Dual Thermoblock heating for fast water and milk heating.
• 20-bar ForceAroma pressure pump for rich crema and aroma.
• 700 ml Full-Milk reservoir.
• Hot water dispenser for infusions.
• Double outlet arm and two filters for preparing one or two coffees simultaneously.
• Removable 1.3 L water tank.
• Stainless steel cup warming tray.

2. Safety Instructions

Please read these safety instructions carefully before using the appliance to prevent damage due to incorrect use. Keep this manual for future reference.

• Ensure the voltage indicated on the appliance matches your mains voltage.
• Do not immerse the appliance, power cord, or plug in water or any other liquid.
• Keep the appliance out of reach of children.
• Always unplug the appliance when not in use, before cleaning, or if a malfunction occurs.
• Do not operate the appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
• Use only accessories recommended by the manufacturer.
• Place the appliance on a stable, level, heat-resistant surface, away from hot surfaces or open flames.
• Do not touch hot surfaces. Use handles or knobs.
• Be careful when handling hot steam or hot water.
• Regularly clean the appliance as described in the Maintenance section.

3. Product Overview and Components

Familiarize yourself with the different parts of your Cecotec coffee machine.

Figure 3.1: Front view of the Cecotec Power Espresso 20 Steel Pro Latte coffee machine, showing the control panel, portafilter, and milk frother.

Figure 3.2: Side view of the coffee machine highlighting the removable milk tank and portafilter.

Figure 3.3: Illustration of the 1.3 Liter removable water tank, located at the back of the machine.

Main Components:

• Control Panel: Buttons for power, single espresso, double espresso, cappuccino, and hot water.
• Pressure Gauge: (If applicable to your model) Displays brewing pressure.
• Portafilter: Holds ground coffee. Includes single and double shot filters.
• Steam Wand/Milk Frother: For frothing milk for lattes and cappuccinos.
• Removable Water Tank: Located at the back, capacity 1.3 liters.
• Removable Milk Tank: Connects to the side, capacity 700 ml.
• Drip Tray: Collects excess liquid, removable for cleaning.
• Cup Warming Tray: Located on top of the machine to pre-warm cups.

4. Setup

Follow these steps for the initial setup of your coffee machine.

1. Unpack: Carefully remove all packaging materials and ensure all components are present.
2. Clean: Before first use, clean the water tank, milk tank, portafilter, and drip tray with warm soapy water. Rinse thoroughly.
3. Position: Place the machine on a stable, flat, and dry surface. Ensure adequate ventilation around the appliance.
4. Fill Water Tank: Remove the water tank from the back of the machine. Fill it with fresh, cold water up to the MAX level. Replace the tank securely.

Figure 4.1: Illustrates the process of filling the removable water tank.
5. Fill Milk Tank (for milk-based drinks): If preparing milk-based drinks, fill the Full-Milk reservoir with fresh milk. Connect it to the designated port on the side of the machine.
6. First Use Cycle (Priming):
   • Plug the appliance into a grounded power outlet.
   • Place a large container under the coffee outlet and the steam wand.
   • Press the power button to turn on the machine.
   • Press the single espresso button to run water through the system. Repeat this process 2-3 times until water flows smoothly.
   • If using the milk frother, activate the steam function to purge any air from the system.
7. Pre-heat Cups: Place cups on the cup warming tray on top of the machine to pre-heat them.

5. Operating Instructions

5.1 Making Espresso

1. Ensure the water tank is filled.
2. Insert the desired filter (single or double) into the portafilter.
3. Add ground coffee to the filter. For best results, use freshly ground espresso coffee. Do not overfill.
4. Tamp the coffee evenly with a tamper (not included, if applicable).
5. Attach the portafilter to the brewing head by aligning it and twisting it to the right until it locks into place.
6. Place one or two pre-heated cups under the portafilter spouts.

Figure 5.1: The machine brewing two cups of espresso simultaneously, demonstrating the double outlet arm.
7. Press the single or double espresso button. The machine will automatically brew the coffee and stop.
8. Once brewing is complete, carefully remove the portafilter and discard the used coffee grounds.

5.2 Making Cappuccino / Latte (Instant Cappuccino System)

1. Prepare your espresso as described in section 5.1.
2. Ensure the Full-Milk reservoir is filled with fresh milk and securely connected.
3. Place your cup under the coffee and milk spouts.


Figure 5.2: The Instant Cappuccino feature in action, showing coffee and milk being dispensed into a cup.

4. Press the Cappuccino button. The machine will automatically brew the espresso and then froth and dispense milk into your cup.
5. After use, clean the milk system as described in the Maintenance section.

5.3 Dispensing Hot Water for Infusions

1. Ensure the water tank is filled.
2. Place a cup under the hot water spout (usually the steam wand).


Figure 5.3: The machine dispensing hot water, suitable for preparing infusions or tea.

3. Press the hot water button. The machine will dispense hot water. Press the button again to stop.

6. Maintenance

Regular cleaning and maintenance will ensure the longevity and optimal performance of your coffee machine.

6.1 Daily Cleaning

• Drip Tray: Empty and clean the drip tray daily. Remove it, discard collected liquid, and wash with warm soapy water. Rinse and dry.
• Portafilter and Filters: After each use, remove the portafilter, discard coffee grounds, and rinse the portafilter and filters under running water.
• Milk System: After preparing milk-based drinks, always run a short steam cycle to clear any milk residue from the steam wand/milk frother. Detach the milk tank and rinse it thoroughly. For a deeper clean, disassemble the milk frother components and wash them with warm soapy water.


Figure 6.1: The removable milk tank, which should be cleaned regularly to prevent milk residue buildup.

• Exterior: Wipe the exterior of the machine with a damp cloth. Do not use abrasive cleaners or solvents.

6.2 Descaling

Descaling is essential to remove mineral deposits that can build up over time and affect machine performance. The frequency depends on water hardness and usage.

1. Prepare a descaling solution according to the descaler manufacturer's instructions.
2. Fill the water tank with the descaling solution.
3. Place a large container under the coffee outlet and steam wand.
4. Run several cycles of hot water and espresso brewing (without coffee) until the water tank is empty.
5. Rinse the water tank thoroughly and fill it with fresh water.
6. Run several cycles of fresh water through the machine to rinse out any remaining descaling solution.

7. Troubleshooting

If you encounter issues with your coffee machine, refer to the following table for common problems and solutions.

If the problem persists after trying these solutions, please contact Cecotec customer support.

8. Specifications

9. Warranty and Support

Cecotec products are designed and manufactured to the highest quality standards. In the unlikely event that you experience any issues with your product, please refer to the warranty information provided with your purchase or visit the official Cecotec website for detailed warranty terms and conditions.

For technical support, spare parts, or service, please contact Cecotec customer service through their official channels. Keep your proof of purchase for warranty claims.

Cecotec Official Website: www.cecotec.com (Please check your regional website for specific contact details.)