Cecotec FreeGo Wash&Vacuum Spray Electric Mop User Manual

1. Product Overview

The Cecotec FreeGo Wash&Vacuum Spray Electric Mop is a powerful and versatile cleaning device designed to simultaneously mop and vacuum your floors. With its 250W motor and 29.6V battery, it offers efficient cleaning and up to 35 minutes of autonomy, allowing you to clean your entire home without interruption. It features a wet Jalisco roller for effective cleaning, an integrated water spray function, and separate tanks for clean and dirty water.

Image 1.1: The Cecotec FreeGo Wash&Vacuum Spray Electric Mop, showcasing its sleek design and dual functionality.

Key Features:

• Powerful Cleaning: 250W motor and 12 kPa suction power for effective removal of liquid, wet, and solid dirt.
• Dual Functionality: Mops and vacuums simultaneously, streamlining your cleaning routine.
• Extended Autonomy: Up to 35 minutes of continuous operation on a single charge (29.6V battery).
• Smart Water Management: Separate 700ml clean water tank and 750ml dirty water tank.
• Integrated Water Spray: Allows for precise dosing of water directly onto the floor.
• Digital Display: Provides real-time information on battery level, cleaning modes, and alerts.
• Multiple Modes: Includes Turbo mode for maximum constant suction and Eco mode for adaptive cleaning.

2. Safety Information

Please read all safety instructions carefully before using the appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Ensure the power supply voltage matches the voltage specified on the appliance's rating label.
• Do not immerse the appliance, its power cord, or plug in water or any other liquid.
• Keep the appliance out of reach of children and pets.
• Do not use the appliance on wet hands or bare feet.
• Always unplug the appliance before cleaning or performing any maintenance.
• Do not use the appliance to pick up flammable or combustible liquids, or hot ashes.
• Use only manufacturer-recommended accessories and spare parts.
• If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.

3. Package Contents

Upon opening the package, ensure all components are present and in good condition. If any parts are missing or damaged, contact Cecotec customer service immediately.

• Cecotec FreeGo Wash&Vacuum Spray Electric Mop main unit
• Wet Jalisco roller (pre-installed or separate)
• Charging base
• Power adapter
• Cleaning brush
• User manual

Image 3.1: Main unit with the wet Jalisco roller and a separate brush head, indicating key components.

4. Setup

Follow these steps to set up your Cecotec FreeGo Wash&Vacuum Spray Electric Mop for first use:

1. Assembly: Carefully unpack all components. Insert the handle into the main body of the mop until it clicks into place.
2. Charging: Place the mop on its charging base. Connect the power adapter to the charging base and plug it into a power outlet. The digital display will indicate the charging status. Fully charge the device before first use (approximately 4.5 hours).
3. Fill Clean Water Tank: Locate the clean water tank (700ml capacity). Open the cap and fill it with clean tap water. You may add a small amount of non-foaming floor cleaning solution if desired. Close the cap securely.
4. Install Tanks: Ensure both the clean water tank and the dirty water tank (750ml capacity) are correctly installed in their respective compartments.

Image 4.1: The electric mop standing upright on its charging base, ready for charging or storage.

5. Operating Instructions

Your Cecotec FreeGo Wash&Vacuum Spray Electric Mop is designed for easy and effective floor cleaning. Follow these steps for optimal performance:

1. Power On: Press the power button located on the handle to turn on the device. The digital display will light up.
2. Select Mode: The mop offers two cleaning modes:
   • Eco Mode: Ideal for light cleaning and maintaining battery life. The device adapts to the dirt level.
   • Turbo Mode: Provides maximum constant suction and power for heavily soiled areas.
   Switch between modes using the mode selection button on the handle.
3. Start Cleaning: Tilt the mop backward to engage the roller and begin cleaning. The device will automatically start vacuuming and mopping simultaneously.
4. Use Water Spray: For stubborn stains or to add more moisture, press the water spray button on the handle. This will release water directly onto the floor through the head.
5. Monitor Digital Display: The digital display shows important information such as battery percentage, current cleaning mode, and alerts (e.g., full dirty water tank, empty clean water tank).
6. Cleaning Technique: Move the mop slowly and steadily over the floor. For best results on spills, pass over the area once to vacuum, then use the water spray and mop to clean.

Image 5.1: A user operating the electric mop in a living room, demonstrating its ease of use.

Image 5.2: The mop effectively cleaning up a spill of milk and cereal on a hard floor.

Image 5.3: A close-up view of the digital display on the mop's handle, showing battery percentage.

6. Maintenance and Cleaning

Regular maintenance ensures the longevity and optimal performance of your electric mop.

6.1. After Each Use:

1. Empty Dirty Water Tank: After each cleaning session, remove the dirty water tank (750ml capacity) and empty its contents. Rinse the tank thoroughly with clean water.
2. Clean Roller Brush: The device features a self-cleaning function. Place the mop on its charging base and activate the self-cleaning cycle (refer to digital display or manual for specific instructions). For manual cleaning, remove the roller brush and rinse it under running water. Allow it to air dry completely before re-installing.
3. Clean Filter: Periodically clean the filter located in the dirty water tank. Rinse it under running water and ensure it is completely dry before re-inserting.

6.2. General Cleaning:

• Wipe the exterior of the mop with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Ensure all parts are dry before storing the appliance.

7. Troubleshooting

If you encounter any issues with your Cecotec FreeGo Wash&Vacuum Spray Electric Mop, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact Cecotec customer support.

8. Technical Specifications

9. Warranty and Support

Cecotec products are manufactured to the highest quality standards. This product is covered by a manufacturer's warranty against defects in materials and workmanship from the date of purchase. Please retain your proof of purchase for warranty claims.

For technical support, spare parts, or warranty inquiries, please visit the official Cecotec website or contact their customer service department. Refer to the contact information provided in your product packaging or on the official Cecotec website.

Note: The availability of spare parts is guaranteed for 10 years from the date of manufacture.