Lenco PDR-036 Portable DAB+ FM Radio User Manual

1. Introduction

This manual provides essential information for the safe and efficient operation of your Lenco PDR-036 Portable DAB+ FM Radio. Please read it thoroughly before using the device and retain it for future reference. The Lenco PDR-036 is a versatile portable radio featuring DAB+ digital radio, FM PLL radio with RDS, Bluetooth 5.0 connectivity, a 2.4-inch TFT color display, and a built-in rechargeable battery.

2. Safety Information

• Power Source: Use only the provided USB-C cable for charging. Ensure the power adapter (not included) meets the specified voltage and current requirements.
• Water and Moisture: Do not expose the device to rain, moisture, or dripping/splashing liquids. Do not place objects filled with liquids, such as vases, on the device.
• Heat: Keep the device away from heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Ventilation: Ensure proper ventilation. Do not block any ventilation openings.
• Cleaning: Unplug the device from the power source before cleaning. Use a soft, dry cloth. Do not use liquid cleaners or aerosol cleaners.
• Battery: The device contains a built-in rechargeable Lithium-ion battery. Do not attempt to replace the battery yourself. Dispose of batteries according to local regulations.
• Servicing: Do not attempt to service this product yourself. Refer all servicing to qualified service personnel.

3. Package Contents

Please check that all items are present:

• Lenco PDR-036 Portable DAB+ FM Radio
• USB-C Charging Cable
• User Manual (this document)

4. Product Overview

Front Panel

Image Description: This image displays the front of the Lenco PDR-036 portable radio. It features a large speaker grille on the left, a 2.4-inch color display on the right, and a row of control buttons below the display. The buttons include 'SOURCE', 'BACK', 'INFO', 'UNPAIR', 'MENU', and numbered preset buttons (1, 2, 3, 4+). A power button and a rotary knob for volume/selection are also visible.

• Display: 2.4-inch TFT color screen for station information, time, and menu navigation.
• Speaker: Integrated speaker for audio output.
• Rotary Knob (Right Side): Used for volume control, menu navigation, and selection confirmation.
• Power Button (): Press to turn the radio on or off.
• SOURCE Button: Cycles through available modes (DAB+, FM, Bluetooth, AUX).
• Preset Buttons (1, 2, 3, 4+): Quickly access stored favorite stations.
• BACK Button: Returns to the previous menu or screen.
• INFO Button: Displays additional information about the current station or track.
• UNPAIR Button: Disconnects currently paired Bluetooth devices.
• MENU Button: Accesses the main menu for settings and options.

Rear Panel

Image Description: This image shows the rear panel of the Lenco PDR-036 radio. The telescopic antenna is visible at the top. The back panel is mostly flat with a compartment for the battery (not user-removable) and various connection ports.

• Telescopic Antenna: Extend fully for optimal DAB+ and FM reception.
• USB-C Port: For charging the built-in battery.
• AUX Input (3.5mm): Connect external audio devices.
• Headphone Jack (3.5mm): For private listening.

5. Setup

5.1 Charging the Battery

1. Connect the supplied USB-C cable to the USB-C port on the radio.
2. Connect the other end of the USB-C cable to a suitable USB power adapter (e.g., smartphone charger, computer USB port) or a powered USB hub.
3. The charging indicator on the display will show the charging status. A full charge provides up to 12 hours of playback.

5.2 Antenna Positioning

Image Description: This image shows the Lenco PDR-036 radio from the front, with its telescopic antenna fully extended upwards and backwards. This demonstrates the optimal position for receiving radio signals.

For optimal reception of DAB+ and FM radio stations, fully extend the telescopic antenna. Adjust its position for the best signal quality.

5.3 Initial Power On and DAB+ Scan

1. Press and hold the Power button () to turn on the radio.
2. The first time you power on, the radio will prompt you to select a language. Use the rotary knob to navigate and press to confirm.
3. After language selection, the radio will automatically perform a full scan for DAB+ stations. This may take a few minutes.
4. Once the scan is complete, the radio will tune to the first available DAB+ station.

6. Operating Instructions

6.1 Power On/Off

Press the Power button () to turn the radio on or off.

6.2 Mode Selection

Press the SOURCE button repeatedly to cycle through the available modes: DAB+, FM, Bluetooth, and AUX Input.

6.3 DAB+ Radio Operation

1. Select DAB+ mode using the SOURCE button.
2. If a scan hasn't been performed or you want to rescan, press the MENU button, navigate to "Full Scan" or "Scan," and press the rotary knob to confirm.
3. To browse stations, turn the rotary knob. Press the knob to select a station.
4. Saving Presets: Tune to the desired station. Press and hold one of the numbered preset buttons (1, 2, 3, 4+) until the display confirms the station is saved.
5. Recalling Presets: Briefly press the corresponding numbered preset button (1, 2, 3, 4+) to tune to the saved station.
6. INFO Button: Press the INFO button to cycle through different information displays, such as program type, signal strength, bit rate, and date/time.

6.4 FM Radio Operation

1. Select FM mode using the SOURCE button.
2. Auto Scan: Press and hold the rotary knob to initiate an auto scan for FM stations. The radio will stop at the next strong station.
3. Manual Tuning: Briefly turn the rotary knob to fine-tune the frequency.
4. Saving Presets: Tune to the desired station. Press and hold one of the numbered preset buttons (1, 2, 3, 4+) until the display confirms the station is saved.
5. Recalling Presets: Briefly press the corresponding numbered preset button (1, 2, 3, 4+) to tune to the saved station.
6. RDS (Radio Data System): If available, the display will show station information like station name and program type. Press the INFO button to cycle through available RDS data.

6.5 Bluetooth Operation

1. Select Bluetooth mode using the SOURCE button. The display will show "Bluetooth Pairing" or similar, indicating it's ready to connect.
2. On your Bluetooth-enabled device (smartphone, tablet), go to its Bluetooth settings and search for available devices.
3. Select "Lenco PDR-036" from the list. Your device should pair with the radio.
4. Once paired, you can play audio from your device through the radio.
5. Use the play/pause and track skip buttons on the radio or your connected device to control playback.
6. To disconnect a device, press the UNPAIR button on the radio.

6.6 AUX Input

1. Select AUX mode using the SOURCE button.
2. Connect an external audio device (e.g., MP3 player) to the 3.5mm AUX input jack on the radio using a 3.5mm audio cable (not included).
3. Play audio from your external device. The sound will be output through the radio's speaker.

6.7 Clock and Sleep Timer

Image Description: This image shows the Lenco PDR-036 radio's display in clock mode, featuring an analog clock face with Roman numerals. This indicates the radio's ability to function as a timepiece.

The radio features an integrated clock and a sleep timer function.

• Clock Setting: The clock is usually set automatically via DAB+ or FM RDS signals. If manual adjustment is needed, access the "System Settings" menu via the MENU button.
• Sleep Timer: To activate the sleep timer, press the MENU button, navigate to "Sleep Timer," and select the desired duration (e.g., 15, 30, 60 minutes). The radio will automatically turn off after the set time.

7. Maintenance

• Cleaning: Gently wipe the radio's surface with a soft, dry, lint-free cloth. Do not use abrasive cleaners, waxes, or solvents.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. If storing the radio for an extended period, charge it to approximately 50% and recharge every few months.
• Antenna: Handle the telescopic antenna with care to prevent bending or breaking.

8. Troubleshooting

9. Specifications

• Model: PDR-036
• Radio Type: DAB+ Digital Radio, FM PLL Radio with RDS
• Bluetooth Version: 5.0
• Display: 2.4-inch TFT Color LCD
• Output Power: 2 W (RMS)
• Battery: Built-in Lithium-ion, 2000 mAh
• Battery Life: Up to 12 hours (depending on usage)
• Connections: USB-C (for charging), AUX Input (3.5mm), Headphone Jack (3.5mm)
• Special Features: Clock function, Sleep timer, 4 station memory presets
• Dimensions (L x W x H): 17.5 cm x 5.5 cm x 11.5 cm
• Weight: Lightweight and portable

10. Warranty and Support

Lenco products are manufactured to high quality standards. This product is covered by a warranty in accordance with European law, which applies for a period of two years from the date of purchase. This warranty does not cover damage caused by misuse, neglect, accidents, unauthorized modifications, or normal wear and tear.

For technical support, warranty claims, or service inquiries, please refer to the contact information provided on the official Lenco website or contact your retailer. Information regarding spare parts availability and software updates is not available at this time.