Product Overview
The Görbach 70cm Stainless Steel Shower Rail Set (Model JYCP) is designed to enhance your showering experience with its durable construction and adjustable features. This chrome-finished shower rail includes a versatile shower head holder, offering both functionality and a sleek aesthetic for your bathroom.
Image: Görbach Shower Rail with Showerhead Holder.
Setup and Installation
Follow these steps for proper installation of your Görbach shower rail set. Ensure all components are present before beginning.
Components Included:
- 70cm Stainless Steel Shower Rail
- Adjustable ABS Shower Head Holder
- High-quality Plastic Wall Mounts
- Mounting Screws and Wall Plugs
Installation Steps:
- Prepare the Wall: Identify the desired mounting location. The wall brackets are movable and freely adjustable between 10 and 65 cm, allowing you to use existing drill holes if available.
- Mark Drill Points: Position the wall mounts and mark the drill points. Ensure the rail will be level.
- Drill Holes: Drill holes into the wall at the marked points. Insert the wall plugs.
- Attach Wall Mounts: Secure each wall bracket to the wall with one screw.
- Insert Shower Rail: Slide the 70cm stainless steel shower rail into the secured wall mounts.
- Secure the Rail: Tighten the screws on the wall mounts to firmly hold the shower rail in place.
- Attach Shower Head Holder: The adjustable shower head holder can be easily attached to the rail. Loosen the knob, position it on the rail, and then tighten it.
Image: Wall mount installation process. The wall brackets are adjustable to accommodate existing holes.
Image: Detailed steps for attaching the adjustable shower head holder to the shower rail.
Operating Instructions
The Görbach shower rail set is designed for simple and flexible operation.
Adjusting the Shower Head Holder:
- Height Adjustment: To adjust the height of your shower head, simply loosen the knob on the shower head holder, slide the holder up or down the rail to your desired position, and then tighten the knob firmly.
- Angle Adjustment: The shower head holder can be rotated up to 180 degrees, allowing you to direct the water flow precisely where needed for a comfortable shower. Adjust the angle by gently rotating the holder.
- Secure Grip: The holder features an internal anti-slip rubber sleeve to prevent the shower base from sliding once tightened, ensuring a stable position for your shower head.
Image: The shower head holder can be adjusted in height and secured by tightening the knob.
Image: The shower head holder offers 180-degree angle adjustment for optimal water direction.
Maintenance
Regular cleaning and maintenance will ensure the longevity and appearance of your Görbach shower rail set.
- Cleaning: The chrome finish is designed to resist scratches and facilitate cleaning. Use a soft cloth and mild, non-abrasive cleaning agents. Avoid harsh chemicals, abrasive pads, or acidic cleaners, as these can damage the finish.
- Drying: After cleaning, wipe the surfaces dry with a soft cloth to prevent water spots and maintain the chrome's shine.
- Inspection: Periodically check all connections and mounting points to ensure they remain secure. Tighten any loose screws if necessary.
Troubleshooting
If you encounter any issues with your shower rail set, refer to the following common solutions:
- Shower Head Holder Slips: Ensure the knob on the shower head holder is fully tightened. The internal rubber sleeve provides anti-slip protection when properly secured.
- Rail Feels Loose: Check the wall mounts. Ensure the screws securing the wall mounts to the wall are tight. Also, verify that the rail is firmly seated within the mounts and their retaining screws are tightened.
- Water Leaks (if applicable to connections): While this product is a rail and holder, if you are connecting a shower hose, ensure all connections are properly sealed with plumber's tape and tightened.
Product Specifications
| Brand | Görbach |
| Model Number | JYCP |
| Product Dimensions | 70 x 2.2 x 70 cm |
| Item Weight | 570 grams |
| Color | Chrome |
| Finish | Chrome |
| Material | Stainless Steel (Rail), Plastic (Handle/Lever, Wall Mounts) |
| Installation Method | Wall-mounted |
| Number of Items | 1 |
| Spout Depth | 70 Centimeters (referring to rail length) |
| Batteries Required? | No |
Image: Detailed view of the shower rail components and dimensions.
Image: Quality comparison showing the 22mm diameter of the Görbach stainless steel shower rod versus standard market sizes.
Warranty Information
The warranty for this product does not cover wear and tear or damage caused by improper use. Please refer to your purchase documentation for specific warranty terms and conditions.
Customer Support
For any questions, assistance, or technical support regarding your Görbach shower rail set, please contact our customer service team. We offer 24/7 customer support to ensure your satisfaction.
Please have your product model number (JYCP) and purchase details ready when contacting support.