Introduction
The TAB R3 Carpet Cleaner Machine is a powerful and portable solution designed for deep cleaning various fabric surfaces. With its industry-leading 18KPa suction power, it effectively removes deep stains and revitalizes carpets, upholstery, and more. This manual provides essential information for safe and efficient operation, maintenance, and troubleshooting.
Safety Information
Always read and understand all instructions before using this appliance. Follow basic safety precautions to reduce the risk of fire, electric shock, or injury. Use only as described in this manual. Do not leave the appliance unattended when plugged in. Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts. Do not use with damaged cord or plug. If the appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
What's in the Box
- TAB R3 Carpet Cleaner Main Unit
- Flexible Hose with Handle
- Multi-function Standard Brush
- Wide Brush
- T-shape Brush
- Self-cleaning Brush
- User Manual
Setup
Before first use, ensure all components are present and undamaged. The main unit features separate tanks for clean and dirty water, designed for easy filling and emptying.
Figure 1: Main unit with hose wrapped around the base.
1. Filling the Clean Water Tank
Locate the clean water tank (marked 'Clean Water Tank' or with a blue indicator) on the main unit. Remove the tank by lifting its handle. Open the cap and fill with clean water. For stubborn stains, suitable cleaning solutions can be added. Close the cap securely and place the tank back into the main unit.
Figure 2: The clean water tank (54 oz capacity) ready for filling.
2. Attaching the Brush Head
Select the appropriate brush head for your cleaning task. The unit comes with a multi-function standard brush, a wide brush, a T-shape brush, and a self-cleaning brush. Align the chosen brush head with the handle and firmly push until it clicks into place.
Figure 3: Attaching the brush head to the end of the hose for use.
Operating Instructions
1. Powering On and Mode Selection
Plug the power cord into a suitable electrical outlet. Locate the main power switch on the back of the unit and turn it on. On the control panel, press the power button to turn on the machine. You can select between 'Standard' and 'Turbo' suction modes, and 'Warm' or 'Hot' water temperatures using the respective buttons.
Video 1: Demonstrates powering on the unit and selecting power and temperature modes.
2. Cleaning Process
Hold the brush head firmly against the surface to be cleaned. Press the trigger on the handle to spray water onto the stain. Move the brush head back and forth over the stained area to scrub and extract the dirty water. The powerful 18KPa suction will pull the dirty water into the separate dirty water tank.
Figure 4: Using the brush head to clean a stain on a carpet.
Video 2: Shows the carpet cleaner in action, demonstrating its effectiveness on various stains.
Maintenance
1. Emptying the Dirty Water Tank
Once cleaning is complete or the dirty water tank (marked 'Dirty Water Tank' or with a brown indicator) reaches its maximum fill line, remove it from the main unit. Open the cap and carefully pour out the dirty water. Rinse the tank thoroughly with clean water before placing it back.
Figure 5: The dirty water tank (42.2 oz capacity) being removed and emptied.
2. Self-Cleaning the Hose
The unit features a self-cleaning hose tool. Attach the self-cleaning brush to the hose handle and insert it into the designated port on the main unit. Run the machine in self-clean mode to flush out any debris or residue from the hose, ensuring it remains clean and ready for next use.
Figure 6: Using the self-cleaning tool to flush the hose after use.
Video 3: Demonstrates the self-cleaning function of the hose for easy maintenance.
Troubleshooting
- No Suction: Check if the dirty water tank is full or if the hose/brush head is properly attached. Ensure the filter is clean.
- No Water Spray: Verify the clean water tank is filled and properly seated. Check if the spray nozzle on the brush head is clogged.
- Machine Not Turning On: Ensure the power cord is securely plugged into a working outlet and the main power switch on the back of the unit is in the 'ON' position.
- Hose Damage: The unique detachable design allows for effortless hose replacement if damaged or excessively dirty. Contact customer support for a replacement.
Specifications
- Model Name: R3
- Rated Voltage: 120 V
- Suction Power: 18KPa
- Clean Water Tank Capacity: 54 oz (1600 ml)
- Dirty Water Tank Capacity: 42.2 oz (1250 ml)
- Power Cord Length: 16.4 FT (5 m)
- Hose Length: 5.9 FT (1.8 m)
- Item Weight: 10.19 pounds
- Package Dimensions: 17.04 x 13.58 x 7.99 inches
Warranty & Support
For warranty information, technical support, or replacement parts, please refer to the contact details provided in the original product packaging or visit the official TAB website. Please note that protection plans are available for purchase separately.
