Introduction
Thank you for choosing the FOXBOX FB0007A Analog-Digital Chronograph Watch. This timepiece combines classic analog display with modern digital functionality, offering features such as a stopwatch, calendar, and LED backlight. This manual provides detailed instructions for setting up, operating, and maintaining your watch to ensure optimal performance and longevity.

Image: Front view of the FOXBOX FB0007A Analog-Digital Chronograph Watch, showcasing its stainless steel band and blue dial with both analog hands and digital displays.
Key Features
- Dual Display: Combines traditional quartz analog hands with an automatic digital display for versatile timekeeping.
- Accurate Movement: Equipped with a high-quality original Japanese digital movement and battery for precise timekeeping.
- Durable Construction: Features a stainless steel strap, stainless steel case, high-strength tempered glass, and a stainless steel buckle.
- LED Backlight: Luminous numerals and hands, along with a digital backlight, ensure readability in low-light conditions.
- Water Resistance: Rated for 30 meters (3ATM), suitable for daily life water exposure such as showering or swimming. Note: Do not press any buttons while submerged in water, and avoid hot water.
- Multi-Functionality: Includes stopwatch, calendar (week, date), and alarm functions.
Watch Components and Buttons

Image: Diagram illustrating the watch's buttons and their primary functions. Key buttons are labeled: 1. Light, 2. Start/Pause, 3. Mode, 4. Reset, and a crown for adjusting time.
- Button 1 (Top Left - LIGHT): Activates the LED backlight.
- Button 2 (Top Right - ST/SP): Used for Start/Pause in stopwatch mode, and adjusting values in setting modes.
- Button 3 (Bottom Left - MODE): Cycles through different modes (Time, Alarm, Stopwatch, Date).
- Button 4 (Bottom Right - RESET): Used for resetting values in stopwatch mode, and confirming settings.
- Crown (Middle Right): Pull out to adjust analog time. Push in to resume analog timekeeping.
Setup and Time Setting
1. Setting Analog Time
- Pull out the crown (middle right button) to the first position.
- Rotate the crown to move the analog hands to the desired time.
- Once set, push the crown back in to start the analog timekeeping.
2. Setting Digital Time and Date
- Press MODE (Button 3) repeatedly until the digital time display starts flashing (usually the seconds).
- Press RESET (Button 4) to cycle through the setting items: Seconds → Hour → Minute → Month → Date → Day of Week.
- While an item is flashing, press ST/SP (Button 2) to adjust the value. Hold ST/SP to change values faster.
- After setting all desired values, press MODE (Button 3) to exit the setting mode and return to the normal time display.
Operating Instructions
1. Using the Chronograph (Stopwatch)
- Press MODE (Button 3) repeatedly until "ST" or "STOP" appears on the digital display, indicating stopwatch mode.
- Press ST/SP (Button 2) to start the stopwatch.
- Press ST/SP (Button 2) again to pause the stopwatch.
- To resume, press ST/SP (Button 2).
- To reset the stopwatch to zero, ensure it is paused, then press RESET (Button 4).
- Press MODE (Button 3) to exit stopwatch mode.
2. Setting and Using the Alarm
- Press MODE (Button 3) until "AL" or "ALARM" appears on the digital display.
- Press RESET (Button 4) to select the hour or minute digit for setting. The selected digit will flash.
- Press ST/SP (Button 2) to adjust the flashing hour or minute.
- After setting the alarm time, press MODE (Button 3) to exit alarm setting mode.
- To turn the alarm ON/OFF, in alarm mode, press ST/SP (Button 2). An alarm icon will appear/disappear to indicate its status.
- When the alarm sounds, press any button to stop it.
3. LED Backlight
Press LIGHT (Button 1) to illuminate the digital display and analog hands for a few seconds, allowing for easy reading in dark environments.

Image: The FOXBOX FB0007A watch with its green LED backlight activated, clearly showing the digital time and luminous analog markers in a dark setting.
4. Water Resistance (30M / 3ATM)
Your FOXBOX watch is designed to be water-resistant up to 30 meters (3ATM). This means it is suitable for everyday use, including splashes, rain, and brief immersion in water such as showering or swimming.
- Important: Do not press any buttons while the watch is submerged in water.
- Avoid: Exposure to hot water, steam, or extreme temperature changes, as this can compromise the watch's water seals.

Image: The FOXBOX FB0007A watch being splashed with water, illustrating its 30-meter water resistance capability for daily activities like bathing or swimming.
Maintenance
- Cleaning: Wipe the watch case and strap regularly with a soft, dry cloth to remove dirt and moisture. For stainless steel, a slightly damp cloth can be used, followed by drying.
- Avoid Chemicals: Do not expose the watch to solvents, detergents, perfumes, or cosmetic sprays, as these can damage the case, strap, or seals.
- Temperature: Avoid exposing the watch to extreme temperatures (hot or cold) or sudden temperature changes, which can affect accuracy and water resistance.
- Battery Replacement: The watch uses 1 LR44 battery. When the digital display dims or the watch stops functioning, it's time to replace the battery. It is recommended to have battery replacement performed by a qualified watch technician to ensure proper sealing and water resistance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Analog hands not moving or incorrect time. | Crown is pulled out; low battery. | Push the crown back in. If issue persists, replace battery. |
| Digital display is blank or dim. | Low battery. | Replace battery. |
| Buttons are unresponsive. | Watch is wet; internal malfunction. | Ensure watch is dry. If issue persists, seek professional service. |
| Water condensation inside the watch. | Compromised water resistance due to impact, age, or exposure to hot water/chemicals. | Immediately seek professional service to prevent further damage. Avoid extreme temperatures. |
Specifications
- Model: FB0007A
- Movement: Japanese Digital Movement
- Display: Analog and Digital
- Case Material: Stainless Steel
- Strap Material: Stainless Steel
- Glass Material: High Strength Tempered Glass
- Water Resistance: 30M (3ATM)
- Battery Type: 1 x LR44 (included)
- Dimensions: 16 x 6.4 x 4.9 cm (Parcel Dimensions)
- Weight: 170 g (Parcel Weight)
Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your purchase or contact FOXBOX customer service through their official channels. Keep your purchase receipt as proof of purchase.





