BONTEC Studless TV Wall Mount Instruction Manual

Introduction

This manual provides detailed instructions for the safe and proper installation and use of your BONTEC Studless TV Wall Mount. This mount is designed for 26-55 inch flat or curved LED, LCD, and OLED TVs, supporting VESA patterns up to 400x400mm and a maximum weight of 110lbs. Its low-profile design ensures a minimal gap between the TV and the wall.

Image: A family watching television mounted on a wall, demonstrating the aesthetic integration of the BONTEC Studless TV Wall Mount in a living space.

Safety Information

• Read all instructions carefully before installation.
• Ensure the wall structure can support the combined weight of the mount and your TV.
• Do not exceed the maximum weight capacity of 110lbs (50kg).
• Use only the provided hardware. If any parts are missing or damaged, contact BONTEC customer support.
• Installation on drywall without studs requires careful adherence to instructions to ensure secure mounting.
• Keep children and pets away during installation.

Packing List

Verify all components are present before beginning installation.

Image: Detailed view of all components included in the BONTEC Studless TV Wall Mount package, including wall bracket, TV mounting bracket, spacers, bolts, bubble level, and cable ties.

• (A) Wall Bracket: x1
• (B) TV Mounting Bracket: x1
• (C) Large Spacers: x2
• (W-A) Bubble Level: x1
• (W-B) Cable Ties: x3
• (W-C) Wall Bolts: x21
• TV Mounting Screws: M-A to M-E (various sizes)
• TV Spacers: M-F, M-G (various sizes)
• TV Washers: M-H (various sizes)

Installation Instructions

This studless TV wall mount is designed for easy installation on drywall without the need to locate wall studs. Follow these steps carefully.

Step 1: Attach TV Mounting Bracket to TV

1. Carefully place your TV face down on a soft, clean surface to prevent scratches.
2. Identify the VESA mounting holes on the back of your TV.
3. Select the appropriate screws (M-A to M-E) and spacers (M-F, M-G) that fit your TV's VESA pattern. The mount supports VESA patterns from 100x100mm to 400x400mm.
4. Attach the TV Mounting Bracket (B) to the back of your TV using the selected screws and washers (M-H). Ensure the bracket is securely fastened.
5. Important: Only the top two VESA holes of the TV are used for installation with this specific mount design.

Image: Diagram showing the TV mounting bracket being attached to the upper VESA holes on the back of a television, with an emphasis on using only the top two holes for this mount type.

Image: A chart illustrating various VESA mounting patterns (100x100mm to 400x400mm) and compatible TV sizes (26" to 55").

Step 2: Install Wall Bracket on Drywall

1. Determine the desired height for your TV. Mark the position for the Wall Bracket (A) on the drywall.
2. Use the included bubble level (W-A) to ensure the wall bracket is perfectly horizontal.
3. Position the Wall Bracket (A) against the wall at the marked location.
4. Drive the provided wall bolts (W-C) through the designated holes in the wall bracket into the drywall. These bolts are designed for secure installation without needing to hit a stud. Ensure all bolts are fully inserted and tight.
5. The wall bracket features a series of small nails that secure it firmly to the drywall.

Image: A couple installing the wall bracket onto a white drywall, demonstrating the ease of installation without needing to locate studs. A green checkmark indicates "Can Mount on Dry Wall Alone."

Step 3: Mount TV onto Wall Bracket

1. With assistance, carefully lift the TV with the attached TV Mounting Bracket.
2. Align the TV Mounting Bracket with the Wall Bracket and gently lower the TV until it hooks securely onto the wall bracket.
3. Ensure the TV is level and fully seated on the wall bracket.
4. Use the included cable ties (W-B) to manage and organize any cables for a neat appearance.

Operation

Once installed, the BONTEC Studless TV Wall Mount provides a fixed, low-profile position for your television. While it does not offer tilt or swivel adjustments, its design keeps your TV close to the wall, creating a clean and modern aesthetic.

• The mount holds the TV securely in place, preventing accidental movement.
• The ultra-low profile design results in only 1.1 inches of clearance from the wall.

Image: A side view of a television mounted on a wall, illustrating the minimal 1.1-inch clearance provided by the low-profile design of the BONTEC mount.

Maintenance

The BONTEC Studless TV Wall Mount requires minimal maintenance. Periodically check the following:

• Ensure all wall bolts are still tight and secure.
• Verify the TV Mounting Bracket is firmly attached to the TV.
• Inspect the mount for any signs of wear or damage. If any issues are found, contact customer support.
• Clean the mount with a soft, dry cloth. Avoid abrasive cleaners.

Troubleshooting

Specifications

• Brand: BONTEC
• Model: B0BPSVDW3W
• Mounting Type: Wall Mount
• Movement Type: Fixed (Low Profile)
• Material: Metal
• Color: Black
• Compatible Devices: Television
• Maximum Supported Screen Size: 55 Inches
• Minimum Supported Screen Size: 26 Inches
• Max Load Capacity: 110 lbs (50 kg)
• VESA Compatibility: 100x100mm, 100x200mm, 200x200mm, 300x300mm, 400x400mm
• Wall Clearance: 1.1 inches

Image: An illustration highlighting the solid steel construction of the mount and its maximum load capacity of 110 lbs, with a measurement of 16.9 inches for the wall bracket.

Warranty and Support

BONTEC products are manufactured with quality and reliability in mind. For specific warranty details or technical support, please refer to the warranty card included with your product or visit the official BONTEC website. If you encounter any issues or have questions regarding installation or use, please contact BONTEC customer service.

Contact Information: Please refer to your product packaging or the BONTEC official website for the most current customer support contact details.