DARKBEAM LX300

DARKBEAM LX300 LED COB Headlamp User Manual

Model: LX300

Introduction

Thank you for choosing the DARKBEAM LX300 LED COB Headlamp. This lightweight, rechargeable headlamp is designed for various activities, offering a wide 230° illumination angle and multiple lighting modes. Please read this manual carefully to ensure proper use and maintenance of your device.

DARKBEAM LX300 Headlamp with 230 degree wide angle illumination

Image: The DARKBEAM LX300 headlamp demonstrating its 230-degree wide-angle illumination, providing broad coverage compared to traditional headlamps with narrower beams.

Package Contents

  • DARKBEAM LX300 LED COB Headlamp (2 units for this package)
  • USB-C Charging Cable
  • 8 Mounting Clips
  • User Manual

Setup

1. Initial Charging

Before first use, fully charge the headlamp. The integrated 1200mAh battery ensures reliable performance.

  • Connect the provided USB-C cable to the headlamp's charging port.
  • Connect the other end of the cable to a USB power source (e.g., power bank, wall charger, laptop, car charger).
  • The 4-level power display will indicate the charging status. All four blue lights will be solid when fully charged.
DARKBEAM LX300 Headlamp showing USB-C charging port and 4-level battery indicator

Image: The DARKBEAM LX300 headlamp highlighting its USB-C charging capability and the 4-level battery indicator, showing different charging sources like power banks, wall chargers, laptops, and car chargers.

2. Adjusting the Headband

The headlamp features a highly elastic and adjustable headband for comfortable wear on various head sizes or over helmets.

  • Place the headlamp on your head or helmet.
  • Adjust the elastic strap to achieve a snug yet comfortable fit.
  • Ensure the light source is positioned correctly for your intended activity.

Operating Instructions

Power On/Off and Mode Selection

The headlamp offers a dual light source (white COB and red LED) with four operating modes.

DARKBEAM LX300 Headlamp demonstrating four light modes: COB Low, COB High, Red Stay On, Red Flash

Image: The DARKBEAM LX300 headlamp illustrating its four distinct light modes: COB Low, COB High, Red Stay On, and Red Flash, with examples of their illumination patterns.

  1. To Turn On: Press the power button once. The headlamp will typically turn on in the last used mode or a default white light mode.
  2. To Cycle Modes: Press the power button repeatedly to cycle through the available modes:
    • COB High: Bright white light for maximum illumination (approx. 2.5 hours runtime).
    • COB Low: Energy-saving white light for extended use (approx. 5 hours runtime).
    • Red Stay On: Constant red light, ideal for preserving night vision or emergency signaling (approx. 8 hours runtime).
    • Red Flash: Flashing red light for increased visibility and emergency situations.
  3. To Turn Off: Press and hold the power button for approximately 2-3 seconds.

The 230° floodlight design ensures a wide area of illumination, making it suitable for various tasks and outdoor activities.

Maintenance

Cleaning

The DARKBEAM LX300 headlamp is IPX4 waterproof, meaning it is resistant to splashing water from any direction. However, it is not designed for submersion.

  • Wipe the headlamp with a soft, damp cloth to remove dirt or sweat.
  • Do not use abrasive cleaners or solvents, as these may damage the device.
  • Ensure the USB-C charging port cover is securely closed to maintain water resistance.
DARKBEAM LX300 Headlamp demonstrating IPX4 waterproof rating

Image: The DARKBEAM LX300 headlamp shown in a wet environment, illustrating its IPX4 waterproof rating, indicating resistance to splashes and light rain.

Storage

  • Store the headlamp in a cool, dry place away from direct sunlight.
  • For long-term storage, charge the battery to approximately 50% every 3-6 months to prolong battery life.

Troubleshooting

ProblemPossible CauseSolution
Headlamp does not turn on.Battery is depleted.Charge the headlamp using the provided USB-C cable. Check the 4-level power indicator.
Headlamp does not charge.Faulty cable or power source; charging port obstruction.Try a different USB-C cable and power adapter. Ensure the charging port is clean and free of debris. If the issue persists, contact customer support.
Light is dim or flickers.Low battery; loose connection.Recharge the battery. If fully charged and still dim, contact customer support.
Headband is uncomfortable.Incorrect adjustment.Adjust the elastic strap for a more comfortable fit.

Specifications

Model NumberLX300
Light Source TypeLED COB
Brightness (White Light)400 Lumens (Max)
Beam Angle230 Degrees
Battery Type1200mAh Lithium-ion (Integrated)
Charging PortUSB-C
Runtime (COB High)Approx. 2.5 hours
Runtime (COB Low)Approx. 5 hours
Runtime (Red Light)Approx. 8 hours
Water ResistanceIPX4 (Splash-proof)
MaterialABS
Weight60 Grams
Dimensions (L x W x H)14.5 x 3 x 2 cm

Warranty and Support

DARKBEAM provides a comprehensive warranty and support for your LX300 headlamp:

  • Warranty: One-year limited warranty from the date of purchase.
  • Refund Policy: 180-day quick refund policy.
  • Customer Support: For any questions, issues, or warranty claims, please contact DARKBEAM customer service. You can typically find contact information on the product packaging or the official DARKBEAM website.

Please retain your proof of purchase for warranty purposes.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.