1. Introduction
Thank you for purchasing the Fuzzix ALLSTAR2 Party Light. This versatile LED lighting system is designed to add dynamic color and effects to your events. It features two PAR LED lights and two Jelly Balls, all integrated into a single unit, complete with a height-adjustable tripod and remote control. Please read this manual carefully before use to ensure proper operation and to maximize the lifespan of your device.
Image 1.1: The Fuzzix ALLSTAR2 Party Light unit, showing the main light bar, adjustable tripod, and included remote control.
2. Safety Instructions
To reduce the risk of electrical shock, fire, or injury, always follow these basic safety precautions:
- Read all instructions before operating the device.
- Keep this manual for future reference.
- Do not expose the device to rain or moisture.
- Ensure the power supply matches the voltage requirements specified on the device.
- Do not open the housing; there are no user-serviceable parts inside. Refer all servicing to qualified personnel.
- Avoid direct eye exposure to the light source, as it can cause eye damage.
- Place the device on a stable, level surface or securely mount it on the provided tripod.
- Ensure adequate ventilation around the unit to prevent overheating.
- Unplug the device during lightning storms or when unused for long periods.
3. Package Contents
Carefully unpack your Fuzzix ALLSTAR2 Party Light and check that all items are present and in good condition. If any items are missing or damaged, contact your retailer immediately.
- Fuzzix ALLSTAR2 Party Light Unit
- Adjustable Tripod Stand
- Remote Control (with 1 non-standard battery included)
- Power Cable
- User Manual (this document)
Image 3.1: All components included in the Fuzzix ALLSTAR2 package, ready for assembly.
4. Setup
4.1 Assembling the Tripod Stand
- Remove the tripod stand from its packaging.
- Extend the legs of the tripod until they are fully spread and stable.
- Loosen the locking knob on the main pole and extend the pole to your desired height. Ensure the pole is securely locked in place before attaching the light unit. The maximum height is 165 cm.
Image 4.1: The Fuzzix ALLSTAR2 Party Light unit shown mounted on its adjustable tripod, illustrating height adjustment.
4.2 Attaching the Light Unit
- Align the mounting bracket on the Fuzzix ALLSTAR2 light unit with the top of the tripod stand.
- Securely attach the light unit to the tripod using the provided fasteners. Ensure it is stable and does not wobble.
4.3 Power Connection
- Connect the power cable to the power input on the Fuzzix ALLSTAR2 unit.
- Plug the other end of the power cable into a suitable electrical outlet (220 Volts).
- Ensure the power switch on the unit is in the "OFF" position before plugging it in.
5. Operating Instructions
5.1 Powering On/Off
Locate the power switch on the Fuzzix ALLSTAR2 unit. Flip it to the "ON" position to power on the device. Flip it to "OFF" to power it down.
5.2 Remote Control Functions
The included remote control allows you to manage various functions of the ALLSTAR2 Party Light:
- ON/OFF: Power the unit on or off.
- MODE: Cycle through different operating modes (Auto, Sound Activated).
- SPEED +/-: Adjust the speed of light effects in Auto mode.
- COLOR: Select specific colors or color combinations for the PAR LEDs.
- STROBE: Activate or deactivate the strobe effect.
- DIMMER +/-: Adjust the brightness (0-100%) of the lights.
Image 5.1: The Fuzzix ALLSTAR2 unit highlighting the dimmer function (0-100%) and its low energy consumption.
5.3 Operating Modes
- Automatic Mode: The light unit will cycle through pre-programmed light shows and effects automatically. Use the SPEED buttons on the remote to adjust the pace.
- Sound Activated Mode: The built-in microphone detects ambient sound, and the light effects will synchronize with the rhythm of the music.
Image 5.2: The Fuzzix ALLSTAR2 unit illustrating its dual operating modes: sound-activated and automatic.
Image 5.3: An example of the vibrant light patterns created by the Fuzzix ALLSTAR2 Party Light.
Image 5.4: The Fuzzix ALLSTAR2 Party Light in action, showcasing its portability and ease of transport.
6. Maintenance
6.1 Cleaning
- Always disconnect the device from the power supply before cleaning.
- Use a soft, dry cloth to wipe the exterior of the unit.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish.
- Keep the lenses of the PAR LEDs and Jelly Balls clean for optimal light output.
6.2 Storage
When not in use, store the Fuzzix ALLSTAR2 Party Light in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to store it in its original packaging or a protective case to prevent damage.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | No power supply; power cable loose; power switch off. | Check power connection; ensure power switch is ON; try a different outlet. |
| Remote control not working. | Battery depleted; remote not aimed at sensor; obstruction. | Replace remote battery; ensure clear line of sight to the unit's IR sensor. |
| Lights are dim or not changing. | Dimmer setting too low; incorrect mode selected. | Adjust dimmer setting on remote; switch to Auto or Sound Activated mode. |
| Sound activated mode not responsive. | Microphone sensitivity too low; ambient noise too quiet. | Increase music volume; ensure microphone is not obstructed. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Fuzzix |
| Model | ALLSTAR2 (153.014) |
| Light Source | LED (Light Emitting Diode) |
| Number of LEDs | 20 total |
| LED Distribution |
|
| Power per LED | 1W |
| Luminous Intensity | 5863 lux @ 1m |
| Max Power Consumption | 20 Watts |
| Voltage | 220 Volts |
| Operating Modes | Automatic, Sound Activated |
| Control | Remote Control |
| Tripod Max Height | 165 cm |
| Product Dimensions (L x W x H) | 53 x 25.5 x 12.5 cm |
| Weight | 2.1 Kilograms |
| Material | Plastic |
| Energy Label | A |
Image 8.1: Detailed view of the LED configuration on the Fuzzix ALLSTAR2 unit.
Image 8.2: Dimensions of the tripod stand for the Fuzzix ALLSTAR2 Party Light.
9. Warranty and Support
9.1 Warranty Information
The Fuzzix ALLSTAR2 Party Light comes with a 2-year availability of spare parts. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer.
9.2 Customer Support
If you encounter any issues or have questions regarding your Fuzzix ALLSTAR2 Party Light that are not covered in this manual, please contact your retailer or the manufacturer's customer support for assistance. Please have your model number (ALLSTAR2) and purchase information ready when contacting support.
