Introduction
This manual provides instructions for the Azwok replacement remote control, designed for use with various Bauhn and Linsar television models. This remote control offers direct functionality without the need for programming, serving as a direct replacement for your original remote.
Compatible Models:
- ATV50UHD
- ATV55UHDC-0717
- ATV55FHDED
- ATV40FTHED
- ATV-50UHD
- ATV-55UHDC-0717
- ATV-55FHDED
- ATV-40FTHED
- TV50UHD
- ATV50UHD-1120
- ATV50UHD-1218
- ATV50UHD-0719
- ATV60UHD-0918
- ATV65UHD-0420
- ATV58UHD-0719
- ATV40FHD-0318
- ATV60UHD-0318
- ATV40FHD-0217
- ATV-50FHD4
- ATVU65-0916
- ATV40-014
- ATVU42-515LS50UHD
- LS32CHD
- LS40CFHD
- LS24CFHD12
Package Contents
- 1 x Azwok Replacement Remote Control (Model: AU-ATV50UHD-BA002)
Note: AAA batteries are not included and must be purchased separately.
Setup
1. Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide the battery cover downwards or press the latch and lift to open.
- Insert two (2) AAA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
- Replace the battery cover by sliding it back into place until it clicks securely.

Image: Rear view of the remote control with the battery cover removed, revealing the empty battery compartment where two AAA batteries are to be inserted. The positive and negative terminals are visible.
2. Initial Use
The Azwok replacement remote control is designed for immediate use with compatible Bauhn and Linsar TV models. No programming or pairing is required. Once batteries are installed, point the remote control towards your television and begin operation.
Operating Instructions
This remote control features standard television remote functions. Below is a general overview of common buttons and their uses.

Image: Front view of the Azwok replacement remote control, displaying all buttons. Key buttons include Power (red), TV/Radio, GOTO, Angle, Repeat, A-B, FAV, Text, Hold, Freeze, Sleep, Subtitle, Size, Aspect, Subpage, Media, Playback controls, D.Setup, Index, Menu, Navigation (Up, Down, Left, Right, OK), Title, Exit, Source, D.Menu, EPG, Mute, Display, Volume Up/Down, Channel Up/Down, Number pad (0-9), -/--, Audio, P-Mode, S-Mode, and Lang.
Key Functions:
- POWER: Turns the television on or off.
- TV/RADIO: Switches between TV and Radio modes (if supported by your television).
- Number Buttons (0-9): Directly select channels.
- VOL +/-: Adjusts the volume level.
- CH +/-: Changes the television channel.
- MUTE: Silences or restores the television audio.
- MENU: Accesses the television's main menu.
- Navigation Buttons (Up, Down, Left, Right): Navigates through menu options.
- OK: Confirms selections in menus.
- EXIT: Exits the current menu or function.
- SOURCE: Selects input sources (e.g., HDMI 1, AV, USB).
- MEDIA: Accesses media playback functions.
- Playback Controls (Play, Pause, Stop, Rewind, Fast Forward, Previous, Next): Controls media playback.
- EPG: Displays the Electronic Program Guide (if available).
- SUBTITLE: Toggles subtitles on or off.
- ASPECT: Changes the screen aspect ratio.
- LANG: Selects audio language options.
For specific functions not listed, refer to your television's original user manual, as the remote is designed to replicate the original remote's functionality.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the remote control. Avoid using liquid cleaners or abrasive materials.
- Battery Replacement: Replace batteries when the remote control's response becomes sluggish or stops working. Always replace both batteries simultaneously with new AAA batteries.
- Storage: If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage.
- Avoid Exposure: Do not expose the remote control to direct sunlight, high temperatures, humidity, or liquids.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote control not working. |
|
|
| Some buttons do not respond. |
|
|
| Remote control works intermittently. |
|
|
If troubleshooting steps do not resolve the issue, please contact Azwok customer support.
Specifications
| Model Number | AU-ATV50UHD-BA002 |
| Brand | Azwok |
| Connectivity Technology | Infrared |
| Compatible Devices | Television (Bauhn, Linsar) |
| Power Source | 2 x AAA Batteries (not included) |
| Product Dimensions | 8.27 x 1.97 x 0.59 inches (21 x 5 x 1.5 cm) |
| Item Weight | 2.82 ounces (80 grams) |
| Special Feature | No Programming Required |
Warranty and Support
Warranty Information
This Azwok replacement remote control comes with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and ensures the remote control functions as intended with compatible devices.
Returns are accepted for refund or exchange if the product does not function with your specified devices within the warranty period.
Customer Support
If you encounter any issues, have questions about compatibility, or require assistance, please contact Azwok customer support. Provide your product model number (AU-ATV50UHD-BA002) and a detailed description of your inquiry for prompt assistance.
For the most up-to-date contact information, please refer to the seller's details on the platform where the product was purchased.