CHICIRIS Digital LED Alarm Clock User Manual

Introduction

Welcome to your new CHICIRIS Digital LED Alarm Clock. This manual provides comprehensive instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your device. Please read this manual thoroughly before use and retain it for future reference.

Safety Information

To prevent damage and ensure safe operation, please observe the following safety guidelines:

• Keep the device away from water, high humidity, and extreme temperatures.
• Do not expose the alarm clock to direct sunlight for extended periods.
• Use only the specified power sources (USB cable or AAA batteries).
• Do not attempt to disassemble, modify, or repair the device yourself. Contact qualified personnel for service.
• Ensure proper ventilation around the device during operation.

Package Contents

Please check the box for the following items:

• 1 x CHICIRIS Digital LED Alarm Clock
• 1 x USB Data Cable
• 1 x User Manual
• (Note: 4 x AAA batteries are not included)

Product Overview

Familiarize yourself with the physical components and controls of your alarm clock.

This image displays the rear panel of the alarm clock, highlighting the various control buttons and USB ports. From left to right, you can see the Alarm Setting button, Time Setting button, Volume Adjust button, 12/24 Hour Mode button, Brightness Adjust button, and the Snooze Touch Sensitive Area. Below these, there is a compartment for 4 AAA batteries, a USB Input port, and two USB Output ports (USB Output 1 and USB Output 2) for charging external devices.

Controls and Ports

• Alarm Setting Button (Bell Icon): Used to set and adjust the alarm time, and to toggle the alarm on/off.
• Time Setting Button (Clock Icon): Used to set and adjust the current time.
• Volume Adjust Button (Speaker Icon): Controls the alarm volume.
• 12/24 Hour Mode Button: Switches between 12-hour and 24-hour time display formats.
• Brightness Adjust Button (Sun Icon): Adjusts the display brightness through multiple levels.
• Snooze Touch Sensitive Area: Located on the top center of the clock, activates the snooze function when the alarm sounds.
• 4*AAA Battery Compartment: Holds four AAA batteries for backup power (batteries not included).
• USB Input: Connects the clock to a power source using the provided USB cable.
• USB Output 1 & 2: Dual USB charging ports for external devices.

Setup

Powering the Device

The alarm clock can be powered via USB or batteries.

USB Power (Recommended)

1. Connect the provided USB data cable to the USB Input port on the back of the alarm clock.
2. Plug the other end of the USB cable into a standard USB power adapter (not included) or a powered USB port.
3. The display will light up, indicating the device is powered on.

Battery Backup (Optional)

For backup power during outages or portability, insert 4 AAA batteries (not included) into the battery compartment.

1. Open the 4*AAA Battery Compartment cover on the back.
2. Insert 4 AAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
3. Close the battery compartment cover securely.

Note: Batteries alone will not power the main display continuously; they are primarily for backup to retain settings during power loss or for brief portable use.

Operating Instructions

Setting the Time

1. Press and hold the Time Setting Button (clock icon) until the hour digits start flashing.
2. Use the + or - buttons to adjust the hour.
3. Press the Time Setting Button again to switch to minute adjustment.
4. Use the + or - buttons to adjust the minute.
5. Press the Time Setting Button once more to confirm and exit time setting mode.

Setting the Alarm

1. Press and hold the Alarm Setting Button (bell icon) until the alarm hour digits start flashing.
2. Use the + or - buttons to adjust the alarm hour.
3. Press the Alarm Setting Button again to switch to alarm minute adjustment.
4. Use the + or - buttons to adjust the alarm minute.
5. Press the Alarm Setting Button once more to confirm and exit alarm setting mode. The alarm icon will appear on the display, indicating the alarm is active.
6. To turn the alarm on or off after it has been set, short press the Alarm Setting Button. The alarm icon will appear for ON and disappear for OFF.

Snooze Function

When the alarm sounds, gently touch the Snooze Touch Sensitive Area (located on the top center of the clock) to activate the snooze function. The alarm will pause for 9 minutes and then sound again.

To turn off the alarm completely, press any other button on the back of the clock.

Adjusting Display Brightness

This image illustrates the six available brightness levels for the alarm clock's LED display. The diagram shows the display transitioning from off to progressively brighter settings, indicating that users can cycle through these levels to find their preferred brightness.

Press the Brightness Adjust Button (sun icon) repeatedly to cycle through the 6 available brightness levels, including off.

Adjusting Alarm Volume

Press the Volume Adjust Button (speaker icon) repeatedly to cycle through the available alarm volume levels.

Switching 12/24 Hour Mode

This image demonstrates how to switch between 12-hour and 24-hour time display modes. It shows two clock displays: one set to "10:35 PM" (12-hour format with PM indicator) and another to "22:35" (24-hour format). An arrow indicates that a single press of the 12/24 button toggles between these two modes.

Short press the 12/24 Hour Mode Button to switch between 12-hour (with AM/PM indicator) and 24-hour display formats.

Using USB Charging Ports

The alarm clock features two USB output ports (USB Output 1 and USB Output 2) for charging external devices like smartphones or tablets.

1. Ensure the alarm clock is powered via its USB input.
2. Connect your device's charging cable to one of the USB Output ports.
3. Your device will begin charging.

Maintenance

Cleaning

To clean the alarm clock, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the finish or internal components.

Storage

If storing the device for an extended period, remove the AAA batteries to prevent potential leakage. Store the alarm clock in a cool, dry place, away from direct sunlight and extreme temperatures.

Troubleshooting

If you encounter any issues with your CHICIRIS Digital LED Alarm Clock, please refer to the table below for common problems and their solutions.

Specifications

• Brand: CHICIRIS
• Model: CHICIRISsf3qbi0rtv
• Material: Acrylonitrile Butadiene Styrene (ABS)
• Display Type: Digital LED
• Power Source: USB powered (cable included), 4 x AAA batteries (not included) for backup
• Features: Alarm, Snooze, Dual USB Charging Ports, Adjustable Brightness, Adjustable Volume, 12/24 Hour Display
• Dimensions: Approximately 6.6 cm (2.6 in) x 12.45 cm (4.9 in) x 3.56 cm (1.4 in)
• Weight: Approximately 160 g

This image provides the physical dimensions of the CHICIRIS Digital LED Alarm Clock. It shows the length as 12.45 cm (4.9 inches), the height as 6.6 cm (2.6 inches), and the depth as 3.56 cm (1.4 inches).

Warranty and Support

For warranty information or technical support, please refer to the seller's policy or contact the retailer where the product was purchased. Please retain your proof of purchase for any warranty claims.

For general inquiries about CHICIRIS products, you may visit the official brand store: CHICIRIS Brand Store.