Magivaac 3-in-1 Smart Vacuum ROBO 200kpa Suction with Mop - User Manual

1. Important Safety Information

Please read this manual carefully before operating your Magivaac Smart Vacuum. Keep it for future reference.

• This appliance is for household use only. Do not use outdoors or on commercial surfaces.
• Do not allow children to play with the appliance. Supervise children and pets when the vacuum is operating.
• Use only the original charging dock and power adapter provided by Magivaac.
• Do not operate the vacuum in wet environments or near liquids.
• Ensure all cables and small objects are removed from the floor before operation to prevent entanglement.
• Do not use the vacuum to pick up large debris, sharp objects, or burning/smoking materials.
• Regularly clean the dustbin and filters to maintain optimal performance.
• If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.

2. Product Overview

The Magivaac 3-in-1 Smart Vacuum is designed to sweep, vacuum, and mop, providing comprehensive floor cleaning for your home.

2.1 Main Unit Features

Figure 2.1: Top view of the Magivaac Smart Vacuum, showing the power button, Wi-Fi indicator, and home button.

Figure 2.2: Side view of the Magivaac Smart Vacuum, highlighting the side brushes and obstacle sensors.

• 3-in-1 Functionality: Sweeps, vacuums, and mops for comprehensive cleaning.
• Powerful Suction: 200kpa suction with 3-speed power settings.
• Navigation: Gyroscope navigation and mapping for efficient cleaning paths.
• Sensors: Five pairs of obstacle detection sensors, anti-collision sensors, and stairway-safe anti-fall sensors.
• Connectivity: WiFi-powered, controllable via unit, remote, or smartphone app. Voice-prompt with Amazon Alexa and Google Home.
• Dustbin: 600mL capacity with HEPA filter.
• Water Tank: 200mL capacity attachment for mopping.
• Quiet Operation: Less than 65dB noise level.
• Climbing Ability: 15° climbing angle for carpets up to 1.5 cm.

2.2 Accessories Included

Figure 2.3: All included accessories: remote control, charging dock, power adapter, HEPA filter, dustbin with water tank attachment, 4 vacuum brushes, mopping pad, and cleaning maintenance brush.

• Remote control
• Charging dock
• Power adapter
• HEPA filter (spare)
• Dustbin with water tank attachment
• 4 vacuum brushes (2 main, 2 spare)
• Mopping pad
• Cleaning maintenance brush

3. Setup Guide

3.1 Unpacking and Initial Placement

1. Carefully remove all components from the packaging.
2. Place the charging dock against a wall in an open, uncluttered area, ensuring at least 1 meter of clear space in front and 0.5 meters on either side.
3. Connect the power adapter to the charging dock and plug it into a power outlet. Ensure the power indicator on the dock lights up.
4. Install the side brushes by pressing them onto the square posts on the bottom of the vacuum until they click into place.

Figure 3.1: Magivaac Smart Vacuum correctly positioned on its charging dock.

3.2 Initial Charging

Place the Magivaac Smart Vacuum onto the charging dock. Ensure the charging contacts on the vacuum align with those on the dock. The vacuum will automatically begin charging. For first-time use, charge the vacuum for 4-5 hours until fully charged.

3.3 Connecting to the Smartphone App (Optional)

For advanced features like scheduling, mapping, and remote control, download the Magivaac app from your smartphone's app store. Follow the in-app instructions to connect your vacuum to your home Wi-Fi network. The vacuum supports voice control via Amazon Alexa and Google Home once connected.

Figure 3.2: Magivaac Smart Vacuum demonstrating connectivity with its smartphone application.

4. Operating Instructions

4.1 Cleaning Modes

The Magivaac Smart Vacuum offers four primary cleaning modes:

• Auto Cleaning: The vacuum intelligently navigates and cleans the entire accessible area.
• Spot Cleaning: Focuses on a specific dirty area, cleaning in a spiral pattern.
• Edge Cleaning: Cleans along walls and furniture edges.
• Room Cleaning: Cleans a single room thoroughly.

Select modes using the remote control or the smartphone app.

4.2 Starting and Pausing Cleaning

• To Start: Press the power button on the vacuum, the "Clean" button on the remote, or the "Start" button in the app.
• To Pause: Press the power button again, the "Pause" button on the remote, or the "Pause" button in the app.
• To Return to Dock: Press the "Home" button on the vacuum, the remote, or in the app. The vacuum will automatically return to its charging dock.

4.3 Mopping Function

To use the mopping function:

1. Fill the 200mL water tank attachment with clean water. Do not use cleaning solutions that may clog the system.
2. Attach the mopping pad securely to the water tank.
3. Slide the filled water tank attachment into the designated slot at the rear of the vacuum.
4. Start a cleaning cycle. The vacuum will now sweep, vacuum, and mop simultaneously.

Figure 4.1: Magivaac Smart Vacuum with the water tank and mopping pad installed for wet cleaning.

Note: Remove the water tank and mopping pad when cleaning carpets or when the vacuum is not in use to prevent water damage.

5. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your Magivaac Smart Vacuum.

5.1 Emptying the Dustbin and Cleaning the Filter

Empty the dustbin after each cleaning cycle or when full. Clean the HEPA filter weekly.

1. Press the dustbin release button and pull out the dustbin.
2. Open the dustbin lid and empty its contents into a trash can.
3. Remove the HEPA filter and tap it gently to remove dust. Do not wash the HEPA filter with water.
4. Rinse the dustbin with water if necessary, ensuring it is completely dry before reinserting.
5. Reinsert the HEPA filter and close the dustbin lid, then slide it back into the vacuum.

5.2 Cleaning Brushes

Clean the main brush and side brushes weekly using the provided cleaning tool.

• Main Brush: Remove the main brush cover, lift out the brush, and use the cleaning tool to remove hair and debris.
• Side Brushes: Pull off the side brushes and remove any tangled hair or debris. Replace if worn.

5.3 Cleaning Sensors and Charging Contacts

Wipe the anti-drop sensors, obstacle sensors, and charging contacts on both the vacuum and the charging dock with a clean, dry cloth monthly.

6. Troubleshooting

Refer to this section for common issues and their solutions.

7. Specifications

8. Warranty and Support

For warranty information or technical support, please contact Magivaac customer service. Details can typically be found on the product packaging or the official Magivaac website.

Website: www.magivaac.com (Example link, replace if actual URL is known)

Email: support@magivaac.com (Example email, replace if actual email is known)